BWBoyi Wang

Boyi Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Boyi Wang has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Slip velocity analysis of supercooled large droplets in an icing wind tunnel using 50 kHz microscopic shadowgraphy

    by Fan Tang, Letian Zhang, Boyi Wang, Yingchun Wu, Xuecheng Wu, Shimin Zhu, Xiaoming Song

    Accurate icing wind tunnel testing of aircraft under supercooled large droplets (SLD) conditions necessitates a precise understanding of the velocity slip between droplets and the freestream airflow. This study presents an experimental investigation into the size–velocity correlation in the Chengdu Aircraft Industrial Corporation icing wind tunnel, utilizing a high-speed split-type microscopic shadowgraphic particle tracking velocimetry system operating at 50 kHz. To facilitate automated analysis, a You Only Look Once (YOLOv11x-p2) deep-learning model is employed to automatically identify and filter defocused droplets. This approach enables high-precision sizing and tracking through Kalman filtering. Quantitative analysis reveals a significant inverse exponential correlation between droplet diameter and velocity. SLD demonstrate substantial velocity deficits due to inertial effects, asymptotically stabilizing at approximately 70% of the local freestream velocity. Through dimensionless analysis, the study establishes that the particle Reynolds number (Rep) and Weber number (We) scale positively with droplet diameter, spanning the transition regime from surface-tension dominance to inertia-dominated flow. A novel dimensionless parameter, DN, that incorporates a deformation-corrected drag coefficient is proposed, which successfully collapses velocity data across different wind speeds onto a single master curve. In addition, the KD number allows for the identification of a transition regime, at which the flow physics transitions from a transient dispersed regime to a stable equilibrium regime. These findings provide critical validation data for refining drag models in icing codes and improving collision efficiency predictions required by airworthiness standards.

  • Open Access

    Experimental Quantization of Droplet Spatial Distribution in Icing Wind Tunnel with HACPI

    by Letian Zhang, Boyi Wang, Yingchun Wu, Si Li, Zhiqiang Zhang, Xiangdong Guo, Xuecheng Wu, Quanzhong Xia, Zhen Liu

    The cloud spatial uniformity in the test section is crucial for icing wind tunnels in aircraft icing research and airworthiness certification. To achieve uniform supercooled large droplet (SLD) icing conditions, both the spatial variation in droplet size distribution and the concentration should be considered. In this study, the spatial distribution of droplets under three SLD conditions is explored in the Aviation Industry Corporation of China Aerodynamics Research Institute (AVICARI)’s FL-61 icing wind tunnel. Measurements are conducted at 12 test points in vertical and horizontal directions using the holographic airborne cloud particle imager (HACPI) in conjunction with a two-axis traversing system. The droplet images obtained at specific test points below the test section centerline show deformation phenomena for droplets larger than 400 μm. Additionally, the aspect ratio of deformed droplets increases with droplet size. The spatial evolution of the median volume diameter (MVD) and liquid water content (LWC) is examined. For two spray arrangements where the activated nozzles are positioned close, the test point where the LWC peak in the vertical direction occurs is higher than that of the MVD peak. Further analysis focuses on the size distribution of droplets in the vertical direction. The results show that the settling effect of the droplets larger than 50 μm is evident under a flow velocity of 78 m/s. Meanwhile, the position where large droplets tend to appear lowers as the droplet size increases. Finally, the spatial uniformity of droplet size distributions at the same radial distance is discussed.

  • Three-dimensional (3D) trajectory and attitude measurement of simulated shed ice in wind tunnel with high-speed stereo vision

    by Xinyuan Huang, Jie Su, Fan Tang, Boyi Wang, Yingchun Wu, Xuecheng Wu

    Shed ice three-dimensional (3D) trajectories and attitudes in aircraft inlet systems are highly intricate and critically important for aviation safety, and detailed experimental data for the quantitative validation of shed ice trajectory numerical simulation tools is still lacking. To address this issue, various shed ice models with different shapes, under different wind velocity conditions in wind tunnel, are experimentally investigated using a high-speed stereo vision system. By combining neural networks and stereo vision processing, the 3D position, trajectories, and attitudes of the shed ice models are successfully reconstructed. The results of repeatability analysis indicate that the trajectories of each experiment exhibit a similar overall trend but show slight differences in their paths, and the deviations in the experimental trajectories are acceptable. The translational and angular velocities of the shed ice models are calculated. Ice models with similar Tachikawa numbers (K) exhibit similar motion trajectories and models with larger K values have faster movement speed and distance along the wind direction. The factors affecting the trajectory of shed ice models include the shape, mass of the ice, and wind velocity. Additionally, the attitudes of cuboid shed ice models are investigated, and two modes of attitude change for specific shed ice models are presented. In conclusion, this study not only provides guidance on the translational, rotational, and tremulous movement patterns of ice shedding in aero-engines but also further enhances the database of numerical simulation tools for ice shedding trajectories.


  • Airborne Interferometric Cloud Particle Imager: Instrumentation and Applications to Icing Wind Tunnel

    by Zhenyu Wang, XinHao Wang, Yingchun Wu, Botong Wen, Boyi Wang, Qiao Wang, Senyun Liu, Xiangdong Guo, Si Li, Mei Zheng, et al.

    An instrument for characterizing icing cloud particles in wind tunnels is critically required to enhance the understanding of aircraft icing mechanisms. Moreover, measuring multiscale and multiphase icing cloud particles presents significant challenges, particularly under extreme environmental conditions. This work elucidates the development and validation of the Airborne Interferometric Cloud Particle Imager (AICPI). AICPI’s optical-mechanical-electronic-thermal integrated design guarantees dependable operation in icing wind tunnels. Validation experiments, conducted using a monodisperse droplet generator and a high-speed microscopic imaging system, confirmed that AICPI achieves a relative size measurement error of less than 5%. AICPI was deployed in one ambient temperature wind tunnel and two industrial icing wind tunnels with test section dimensions ranging from 0.6 m × 0.6 m to 3.0 m × 2.0 m, wind speeds up to 50 m/s and temperatures as low as -14◦C. In practical applications, AICPI detects particle sizes within the operational range of 10-200 μm. Results from wind tunnel tests demonstrate AICPI’s feasibility for particle size measurement and phase discrimination in mixed-phase cloud fields.

  • Holographic Airborne for Cloud Particle Imager (HACPI): Development and Applications to Icing Wind Tunnels

    by Yingchun Wu, Letian Zhang, Boyi Wang, Xiaodan Lin, Xinyuan Huang, Xiangdong Guo, Zixu Wang, Si Li, Zhiqiang Zhang, Xuecheng Wu

    Instruments for icing cloud particle characterization are prerequisite for icing wind tunnels in icing physics research and aviation certification. Yet it is challenging to measure the multiple parameters of the multiscale and multiphase icing cloud particles, especially under the extremely hostile environment. To address this issue, a holographic airborne for cloud particle imager (HACPI) has been developed for icing cloud measurement. With the merit of three-dimensional imaging of holography, HACPI has the capability of simultaneously measuring particle morphology, size distribution, median volume diameter (MVD) and liquid water content (LWC), with a graphical user interface (GUI) software for remote control and real-time processing through parallel reconstruction. Aerodynamic simulations indicate relatively uniform flow characteristics within a sampling depth of 46 mm. The developed HACPI is applied to three industrial icing wind tunnels with test section scales ranging from 0.6 m × 0.6 m to 3.0 m × 2.0 m. The elaborative designs of optical-mechanical-electronic-thermal integrations evidenced HACPI’s robust performance in high speed wind up to ~200 m/s and low static temperature down to -30°C. Results show that HACPI can accurately measure the icing clouds in the Code of Federal Regulations Title 14 Part 25 Appendix C, the bimodal supercooled large droplet conditions in Appendix O, and the ice crystals in the Code of Federal Regulations Title 14 Part 33 Appendix D, with accuracies verified by side-by-side comparisons to certificated commercial instruments. HACPI has demonstrated to be a powerful instrument for icing cloud measurement in icing wind tunnels, and can be extended to other ground simulation facilities as well as aviation certification.


  • Experimental analysis of ice crystal size–velocity correlation in icing wind tunnel with digital holographic particle tracking velocimetry

    by Boyi Wang, Yingchun Wu, Letian Zhang, Xinyuan Huang, Xiangdong Guo, Xiaoming Song, Pengbo Bai, Pan Shi, Shimin Zhu, Qian Zhang, et al.

    The ice crystal icing in aero-engines poses a significant threat to aircraft flight safety, and investigating the correlation between ice crystal size and velocity in icing wind tunnels is essential for correlating ground tests with flight conditions. In this paper, a digital holographic particle tracking velocimetry system is developed and integrated with an icing wind tunnel, and the ice crystal size and velocity are simultaneously measured in experiments at four different wind speeds. The velocity difference between the ice crystal and wind has been experimentally observed, and it increases with both the ice crystal size and wind speed. The normalized velocities of the ice crystals by the wind speeds decrease with size, and the maximum velocity difference in the experiments reaches 28% of the wind speed. Additionally, quantitative correlations between ice crystal size and normalized velocity based on the power function and polynomial model are established. The relationship between the particle Reynolds number of ice crystal and size is also analyzed, resulting in the development of a model based on the power function, and the power index ranges from 1.51 to 1.64. These findings will provide valuable assistance in the calibration and commissioning of the ice crystal simulation system in icing wind tunnels, as well as in exploring the correlation between ground icing tests and flight and in developing corresponding models.