Nikolai Petrovich Iakimov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nikolai Petrovich Iakimov has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Evgenii Olegovich Fomin
Department of Chemistry, M. V. Lomonosov Moscow State University, 119991 Moscow, Russian Federation
7 shared publications Irina Dmitrievna Grozdova
Department of Chemistry, M. V. Lomonosov Moscow State University, 119991 Moscow, Russian Federation
4 shared publications- Nickolay S. Melik-Nubarov
Chemistry Department, M.V. Lomonosov Moscow State University, Moscow, Russia
4 shared publications Nikolay Sergeevich Melik-Nubarov
Department of Chemistry, M. V. Lomonosov Moscow State University, 119991 Moscow, Russian Federation
4 shared publications- Ekaterina M. Budynina
Chemistry Department, M.V. Lomonosov Moscow State University, Moscow, Russia
3 shared publications Anna K. Berkovich
Chemistry Department, M.V. Lomonosov Moscow State University, Moscow, Russia
2 shared publications
Latest Publications
- 10 June 2026
- Published by Springer Nature in Journal of Polymer Research
- Vol. 33 (6) , 266
Thermodynamics of ring-opening polymerization of cyclic propylene oxalate: keeping the polymerizability/recyclability balance
- 10 June 2026
- Published by Springer Nature in Journal of Polymer Research
- Vol. 33 (6) , 266
Thermodynamics of ring-opening polymerization of cyclic propylene oxalate: keeping the polymerizability/recyclability balance
- 4 June 2026
- Published by OOO Zhurnal "Mendeleevskie Soobshcheniya" in Mendeleev Communications
- Vol. 36 (4) , 429-432
Chromophore initiator as a tool for exploring ring-opening polymerization of cyclic oxalates
High-extinction 1-pyrenebutanol was used as a chromophore initiator in the ring-opening polymerization of propylene oxalate with simultaneous selective labeling of linear macromolecules. Analysis of the molecular weight distribution using a UV detector allows tracking of linear macromolecules labeled with the initiator at one end. This approach provides essential information about the polymerization process.
- 4 June 2026
- Published by OOO Zhurnal "Mendeleevskie Soobshcheniya" in Mendeleev Communications
- Vol. 36 (4) , 429-432
Chromophore initiator as a tool for exploring ring-opening polymerization of cyclic oxalates
High-extinction 1-pyrenebutanol was used as a chromophore initiator in the ring-opening polymerization of propylene oxalate with simultaneous selective labeling of linear macromolecules. Analysis of the molecular weight distribution using a UV detector allows tracking of linear macromolecules labeled with the initiator at one end. This approach provides essential information about the polymerization process.
- Open Access
- 30 April 2026
- Published by Elsevier in SSRN Electronic Journal
I1,10-Phenanthroline Complexes of Zinc as Highly Active Biocompatible Catalysts in Cyclic Oxalates Polymerization Displaying Unique Regioselectivity
Biodegradable polyoxalates are highly vulnerable to hydrolysis, making them promising absorbable materials. Such polymers can be readily produced by ring-opening polymerization (ROP) of cyclic oxalates. However, stannous octoate (SnOct2), commonly used as a polymerization catalyst, strongly limits the biomedical applications of the polyoxalates due to the considerable toxicity of tin-containing compounds. Here, we propose a series of efficient catalysts for ROP of propylene oxalate based on biocompatible metals (Zn or Al). The catalytic activity of ligand-free AlMe3 was similar to that of SnOct2. However, prominent troubles with the ROP initiation step were observed. In contrast, ZnEt2 demonstrated a 16-times acceleration of the ROP, keeping a favorable pattern of polymerization. Further increase in the catalytic activity was achieved with complexes of ZnEt2 bearing 1,10-phenanthroline derivatives. However, the complex with unsubstituted 1,10-phenanthroline induced undesirable end-group-specific transesterification with formation of linear oligomers with pyrene on both ends. The introduction of bulky substituents into the ligand structure efficiently suppressed this side process but lowered the polymerization rate. The complex with a butyl-substituted ligand was recognized as a promising catalyst with a structure optimally balancing these trends. All Zn-containing catalysts provided unique regioselectivity of polymerization, which was not described previously for cyclic esters ROP. Resulting polyoxalates were enriched by symmetrical head-to-head and tail-to-tail dyads, whereas head-to-tail dyads were in deficiency. The degree of regioregularity increased with the rise in steric hindrance. Thus, the biocompatible catalysts designed in this work pave the way to the synthesis of polyoxalates possessing a unique type of regioregularity.
- 30 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessI1,10-Phenanthroline Complexes of Zinc as Highly Active Biocompatible Catalysts in Cyclic Oxalates Polymerization Displaying Unique Regioselectivity
Biodegradable polyoxalates are highly vulnerable to hydrolysis, making them promising absorbable materials. Such polymers can be readily produced by ring-opening polymerization (ROP) of cyclic oxalates. However, stannous octoate (SnOct2), commonly used as a polymerization catalyst, strongly limits the biomedical applications of the polyoxalates due to the considerable toxicity of tin-containing compounds. Here, we propose a series of efficient catalysts for ROP of propylene oxalate based on biocompatible metals (Zn or Al). The catalytic activity of ligand-free AlMe3 was similar to that of SnOct2. However, prominent troubles with the ROP initiation step were observed. In contrast, ZnEt2 demonstrated a 16-times acceleration of the ROP, keeping a favorable pattern of polymerization. Further increase in the catalytic activity was achieved with complexes of ZnEt2 bearing 1,10-phenanthroline derivatives. However, the complex with unsubstituted 1,10-phenanthroline induced undesirable end-group-specific transesterification with formation of linear oligomers with pyrene on both ends. The introduction of bulky substituents into the ligand structure efficiently suppressed this side process but lowered the polymerization rate. The complex with a butyl-substituted ligand was recognized as a promising catalyst with a structure optimally balancing these trends. All Zn-containing catalysts provided unique regioselectivity of polymerization, which was not described previously for cyclic esters ROP. Resulting polyoxalates were enriched by symmetrical head-to-head and tail-to-tail dyads, whereas head-to-tail dyads were in deficiency. The degree of regioregularity increased with the rise in steric hindrance. Thus, the biocompatible catalysts designed in this work pave the way to the synthesis of polyoxalates possessing a unique type of regioregularity.
- Open Access
- 11 April 2026
- Published by Elsevier in SSRN Electronic Journal
Formation of supported lipid bilayers on silica hollow nanospheres: surface passivation and controlled release of hydrophilic payloads
Hollow silica nanospheres (SHNs) coated with a supported lipid bilayer (SLB) combine the high loading capacity of a hollow interior with the biocompatibility and tunable surface properties of a lipid membrane, making them promising for controlled delivery applications. Here, we systematically investigate the formation of SLBs on SHNs of varying diameters using neutral, positively charged, and negatively charged liposomes. We demonstrate that SLB formation requires sufficient ionic strength to overcome electrostatic repulsion between the negatively charged silica surface and liposomes of like charge. In contrast, positively charged liposomes form SLBs irrespective of salt concentration. Using an aggregation-based titration method, we quantify surface coverage and reveal that smaller SHNs are slightly more favorable for surface bilayer assembly. Notably, the lipid coating effectively passivates the silica surface, imparting exceptional colloidal stability under high-salt conditions. Beyond surface functionalization, we explore the encapsulation and release properties using alkali metal chlorides as non-adsorbing model cargos. The hollow cavity is readily accessible for loading, and the mesoporous silica shell acts as a secondary diffusion barrier, leading to release kinetics that scale with the hydrated radius of the cation. These findings establish design principles for lipid-coated SHNs as tunable carriers for hydrophilic substances with controlled release capabilities.
- 11 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessFormation of supported lipid bilayers on silica hollow nanospheres: surface passivation and controlled release of hydrophilic payloads
Hollow silica nanospheres (SHNs) coated with a supported lipid bilayer (SLB) combine the high loading capacity of a hollow interior with the biocompatibility and tunable surface properties of a lipid membrane, making them promising for controlled delivery applications. Here, we systematically investigate the formation of SLBs on SHNs of varying diameters using neutral, positively charged, and negatively charged liposomes. We demonstrate that SLB formation requires sufficient ionic strength to overcome electrostatic repulsion between the negatively charged silica surface and liposomes of like charge. In contrast, positively charged liposomes form SLBs irrespective of salt concentration. Using an aggregation-based titration method, we quantify surface coverage and reveal that smaller SHNs are slightly more favorable for surface bilayer assembly. Notably, the lipid coating effectively passivates the silica surface, imparting exceptional colloidal stability under high-salt conditions. Beyond surface functionalization, we explore the encapsulation and release properties using alkali metal chlorides as non-adsorbing model cargos. The hollow cavity is readily accessible for loading, and the mesoporous silica shell acts as a secondary diffusion barrier, leading to release kinetics that scale with the hydrated radius of the cation. These findings establish design principles for lipid-coated SHNs as tunable carriers for hydrophilic substances with controlled release capabilities.
- 30 July 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (30) , 15840-15844
Factors underlying sensitivity of aromatic oxalates in peroxyoxalate chemiluminescent reaction in aqueous-organic media
Sensitivity and selectivity are the criteria to choose an oxalate for chemiexcited PDT.
- 30 July 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (30) , 15840-15844
Factors underlying sensitivity of aromatic oxalates in peroxyoxalate chemiluminescent reaction in aqueous-organic media
Sensitivity and selectivity are the criteria to choose an oxalate for chemiexcited PDT.
- 17 July 2025
- Published by OOO Zhurnal "Mendeleevskie Soobshcheniya" in Mendeleev Communications
- Vol. 35 (5) , 586-588
End-group analysis to characterize the ring-opening polymerization of propylene oxalate
To get insight into attributes of propylene oxalate ringopening polymerization catalyzed by Sn(Oct)2, the polymerization was initiated by benzyl alcohol. According to 1H NMR and MALDI-TOF mass spectrometry, the polymer chains were terminated by propylene glycol and benzyl residues, which amount correlated perfectly. The quantitative incorporation of the initiator into polyoxalates is the key to their functionalization and the synthesis of block-copolymers.
- 17 July 2025
- Published by OOO Zhurnal "Mendeleevskie Soobshcheniya" in Mendeleev Communications
- Vol. 35 (5) , 586-588
End-group analysis to characterize the ring-opening polymerization of propylene oxalate
To get insight into attributes of propylene oxalate ringopening polymerization catalyzed by Sn(Oct)2, the polymerization was initiated by benzyl alcohol. According to 1H NMR and MALDI-TOF mass spectrometry, the polymer chains were terminated by propylene glycol and benzyl residues, which amount correlated perfectly. The quantitative incorporation of the initiator into polyoxalates is the key to their functionalization and the synthesis of block-copolymers.
- 21 May 2025
- Published by OOO Zhurnal "Mendeleevskie Soobshcheniya" in Mendeleev Communications
- Vol. 35 (4) , 478-480
Employing gold nanoclusters for analysis of pectinase activity
A method for sensing pectinase activity was proposed based on the formation of polyelectrolyte complexes of negatively charged, glutathione-coated, fluorescent gold nanoclusters Au22(SG)18 with the polycation 3,3-ionene and the anionic polysaccharide pectin. The formation of polyelectrolyte complexes of the nanoclusters with ionene leads to an increase in fluorescence due to the aggregation-induced emission enhancement effect, while after the addition of the natural polyanion pectin, the emission decreases. Enzymatic hydrolysis of pectin by pectinase resulted in the recovery of the fluorescence of nanoclusters, which allows sensing the activity of pectinase.
- 21 May 2025
- Published by OOO Zhurnal "Mendeleevskie Soobshcheniya" in Mendeleev Communications
- Vol. 35 (4) , 478-480
Employing gold nanoclusters for analysis of pectinase activity
A method for sensing pectinase activity was proposed based on the formation of polyelectrolyte complexes of negatively charged, glutathione-coated, fluorescent gold nanoclusters Au22(SG)18 with the polycation 3,3-ionene and the anionic polysaccharide pectin. The formation of polyelectrolyte complexes of the nanoclusters with ionene leads to an increase in fluorescence due to the aggregation-induced emission enhancement effect, while after the addition of the natural polyanion pectin, the emission decreases. Enzymatic hydrolysis of pectin by pectinase resulted in the recovery of the fluorescence of nanoclusters, which allows sensing the activity of pectinase.
- 21 May 2025
- Published by OOO Zhurnal "Mendeleevskie Soobshcheniya" in Mendeleev Communications
- Vol. 35 (4) , 437-439
Determination of critical micelle concentrations of Pluronics
Critical micelle concentrations (CMCs) of Pluronics were determined by three techniques, namely 1,6-diphenyl-1,3,5-hexatriene fluorescence, sensitization of multidrug-resistant cancer cells with Pluronic unimers and a novel technique based on the migration of fluorophore-labeled lipid from liposomes into Pluronic micelles. The CMCs of each Pluronic determined by the three methods differ by no more than 30
- 21 May 2025
- Published by OOO Zhurnal "Mendeleevskie Soobshcheniya" in Mendeleev Communications
- Vol. 35 (4) , 437-439
Determination of critical micelle concentrations of Pluronics
Critical micelle concentrations (CMCs) of Pluronics were determined by three techniques, namely 1,6-diphenyl-1,3,5-hexatriene fluorescence, sensitization of multidrug-resistant cancer cells with Pluronic unimers and a novel technique based on the migration of fluorophore-labeled lipid from liposomes into Pluronic micelles. The CMCs of each Pluronic determined by the three methods differ by no more than 30
- 31 August 2024
- Published by Elsevier in European Polymer Journal
- Vol. 220
Polymerization of six-membered propylene oxalate
- 31 August 2024
- Published by Elsevier in European Polymer Journal
- Vol. 220
Polymerization of six-membered propylene oxalate