LFLuís Figueiredo

Luís Figueiredo

*This is an algorithmically generated author record based on publicly available information.

Luís Figueiredo has a total of 9 co-authors. Here are the top co-authors by number of shared publications:

  • Diogo Cavaleiro

    CEMMPRE—Centre for Mechanical Engineering, Materials and Processes, ARISE—Advanced Production and Intelligent Systems, Department of Mechanical Engineering, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal

    2 shared publications
  • Sandra Carvalho

    CEMMPRE—Centre for Mechanical Engineering, Materials and Processes, ARISE—Advanced Production and Intelligent Systems, Department of Mechanical Engineering, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal

    2 shared publications
  • Susana Devesa

    CEMMPRE, ARISE, Department of Mechanical Engineering, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal

    2 shared publications
  • Daniela Santo

    CEMMPRE, ARISE, Department of Mechanical Engineering, University of Coimbra, Coimbra, Portugal

    1 shared publication
  • Gabriel Santos

    CEMMPRE—Centre for Mechanical Engineering, Materials and Processes, ARISE—Advanced Production and Intelligent Systems, Department of Mechanical Engineering, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal

    1 shared publication
  • Ilias Reddah

    Mechanical Engineering Department, Abbes Laghrour University Khenchela, P.O. Box 1252, Khenchela 40004, Algeria

    1 shared publication

Latest Publications

  • Open Access

    Effect of Phosphorous Acid-Induced pH Variation on Ni–P Electrodeposition: Influence on Current Efficiency, Deposition Rate, Surface Properties, and Tribological Performance

    by Ilias Reddah, Laala Ghelani, Daniela Santo, Joana Neiva, Luís Figueiredo, Diogo Cavaleiro, Sandra Carvalho, Susana Devesa

    The present work investigates the effect of phosphorous-acid-induced pH variation on the electrodeposition of Ni–P coatings and examines how changes in electrolyte composition influence current efficiency, deposition behaviour, microstructure, optical properties, tribological response and wettability. In addition, the study assesses the potential of a post-deposition surface modification using stearic acid to enhance the hydrophobic character of the coatings. Ni and Ni–P layers were electrodeposited on 316L stainless steel using electrolytes containing 0–40 g/L of H3PO3, resulting in progressively lower bath pH and significant changes in deposition kinetics. The introduction of H3PO3 caused a sharp reduction in cathodic current efficiency and deposition rate, producing ultrathin Ni–P films with 20–24 at.% P. XRD and SEM analyses showed a transition from highly crystalline Ni to amorphous, nodular Ni–P structures. Tribological tests revealed a pronounced improvement in sliding performance for all Ni–P coatings compared to pure Ni, with sample S2 (5 g/L of H3PO3) exhibiting the lowest and most stable friction coefficient (~0.30). Wettability studies indicated that all as-deposited Ni–P surfaces were weakly hydrophobic, with surface energies dominated by the dispersive component. A stearic acid post-treatment produced a measurable increase in the water contact angle, indicating successful surface functionalization of the coatings. Overall, this study provides a comprehensive assessment of how phosphorous acid concentration governs the functional behaviour of electrodeposited Ni–P coatings.


  • Open Access

    Optimization of Black Nickel Coatings’ Electrodeposit onto Steel

    by Gabriel Santos, Zohra Benzarti, Diogo Cavaleiro, Luís Figueiredo, Sandra Carvalho, Susana Devesa

    Coatings can be created using various technologies and serve different roles, including protection, functionality, and decorative purposes. Among these technologies, electrodeposition has emerged as a low-cost, versatile, and straightforward process with remarkable scalability and manufacturability. Nickel, extensively studied in the context of electrodeposition, has many applications ranging from decorative to functional. The main objective of the present work is the electrodeposition of double-layer nickel coatings, consisting of a bright nickel pre-coating followed by a black nickel layer with enhanced properties, onto steel substrates. The influence of deposition parameters on colour, morphology, adhesion, roughness, and coefficient of friction was studied. The effects of cetyltrimethylammonium bromide (CTAB) and WS2 nanoparticles on the coatings’ properties and performance were also investigated. Additionally, the influence of the steel substrate’s pre-treatment, consisting of immersion in an HCl solution, prior to the electrodeposition, to etch the surface and activate it, was evaluated and optimized. The characterization of the pre-coating revealed a homogeneous surface with a medium superficial feature of 2.56 μm. Energy dispersive X-ray spectroscopy (EDS) results showed a high content of Ni, and X-ray diffraction (XRD) confirmed its crystallinity. In contrast, the black films’ characterization revealed their amorphous nature. The BN10 sample, which corresponds to a black nickel layer with a deposition time of 10 min, showed the best results for colour and roughness, presenting the lowest brightness (L*) value (closest to absolute black) and the most homogeneous roughness. EDS analysis confirmed the incorporation of WS2, but all samples with CTAB exhibited signs of corrosion and cracks, along with higher coefficient of friction (COF) values.