Shams Ul Haq
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Shams Ul Haq has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Erfan Abbasian
Babol Noshirvani University of Technology
10 shared publications - Abdolreza Darabi
Shiraz University of Technology (SUTECH)
3 shared publications Erfan Abbasian
Department of Electrical and Computer Engineering, Babol Noshirvani University of Technology, Babol, Iran
2 shared publications- Imran Ahmed Khan
Department of Electronics and Communication Engineering Jamia Millia Islamia New Delhi India
2 shared publications - Mukku Pavan Kumar
Dept. of ECE, Lendi Institute of Engineering and Technology (A), Vizianagaram, Andhra Pradesh, India
2 shared publications - Owais Ahmad Shah
Department of Electronics and Communication Engineering, Dayananda Sagar University, Bengaluru, India
2 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
- Vol. 45 (11) , 5530-5539
Unbalanced Ternary Full Adder Architecture in CNTFET Technology: Design and Application
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
- Vol. 45 (11) , 5530-5539
Unbalanced Ternary Full Adder Architecture in CNTFET Technology: Design and Application
- 29 January 2026
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (8) , 11537-11554
Low Complexity, High-Performance Ternary Full Adder Using CNTFET Technology
- 29 January 2026
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (8) , 11537-11554
Low Complexity, High-Performance Ternary Full Adder Using CNTFET Technology
- Open Access
- 2 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 206734-206752
Hybrid Cross-Coupled Inverter-Based 8T SRAM Design With Half-Selection Immunity and Enhanced Stability for Power-Constrained Applications
This paper presents a novel 8-transistor (8T) static random-access memory (SRAM) cell employing a hybrid cross-coupled inverter (HCCI) structure to address critical challenges in power-constrained computing environments. The proposed HCCI8T architecture integrates conventional and Schmitt-trigger inverters within the feedback loop to improve write stability and eliminate write half-selection disturbance, a common issue in conventional 8T cells. The design is implemented using carbon nanotube field-effect transistor (CNTFET) technology at the 32-nm node, offering superior electrical characteristics over traditional devices. Device-level simulations demonstrate a 2.52× improvement in on-current, 8.19× reduction in off-current, and a 20.65× increase in the on-off current ratio compared to baseline transistors, alongside a 1.18× reduction in subthreshold swing. Circuit-level analysis at 0.7 V shows significant improvements in memory performance: a 2.11× enhancement in write static noise margin (0.415 V), a 2.2× improvement in read static noise margin (0.238 V), and reductions of 28.88% in read power, 25.38% in write power, and 59.57% in leakage power. Although the design incurs a moderate latency increase (22–27%), Monte Carlo simulations confirm strong robustness under process variations. Additionally, the proposed SRAM cell achieves an electrical quality metric (EQM) of 1.314 × 10-5 at 0.35 V, outperforming existing CNTFET-based alternatives. These results establish the HCCI8T cell as a viable candidate for next-generation low-power memory systems where static noise immunity and write integrity are critical under tight energy budgets.
- 2 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 206734-206752
Open AccessHybrid Cross-Coupled Inverter-Based 8T SRAM Design With Half-Selection Immunity and Enhanced Stability for Power-Constrained Applications
This paper presents a novel 8-transistor (8T) static random-access memory (SRAM) cell employing a hybrid cross-coupled inverter (HCCI) structure to address critical challenges in power-constrained computing environments. The proposed HCCI8T architecture integrates conventional and Schmitt-trigger inverters within the feedback loop to improve write stability and eliminate write half-selection disturbance, a common issue in conventional 8T cells. The design is implemented using carbon nanotube field-effect transistor (CNTFET) technology at the 32-nm node, offering superior electrical characteristics over traditional devices. Device-level simulations demonstrate a 2.52× improvement in on-current, 8.19× reduction in off-current, and a 20.65× increase in the on-off current ratio compared to baseline transistors, alongside a 1.18× reduction in subthreshold swing. Circuit-level analysis at 0.7 V shows significant improvements in memory performance: a 2.11× enhancement in write static noise margin (0.415 V), a 2.2× improvement in read static noise margin (0.238 V), and reductions of 28.88% in read power, 25.38% in write power, and 59.57% in leakage power. Although the design incurs a moderate latency increase (22–27%), Monte Carlo simulations confirm strong robustness under process variations. Additionally, the proposed SRAM cell achieves an electrical quality metric (EQM) of 1.314 × 10-5 at 0.35 V, outperforming existing CNTFET-based alternatives. These results establish the HCCI8T cell as a viable candidate for next-generation low-power memory systems where static noise immunity and write integrity are critical under tight energy budgets.
- 1 December 2025
- Published by Springer Nature in Silicon
- Vol. 18 (1) , 249-264
Overcoming Silicon MOSFET Limitations with Chirality-Engineered CNTFETs: A Ternary Half Adder Demonstration for Next-Generation Nanoelectronics
- 1 December 2025
- Published by Springer Nature in Silicon
- Vol. 18 (1) , 249-264
Overcoming Silicon MOSFET Limitations with Chirality-Engineered CNTFETs: A Ternary Half Adder Demonstration for Next-Generation Nanoelectronics
- 5 October 2025
- Published by Springer Nature
- p. 937-944
Design-Analysis of CNTFET-Based Energy Efficient Ternary Logic Gates
- 5 October 2025
- Published by Springer Nature
- p. 937-944
Design-Analysis of CNTFET-Based Energy Efficient Ternary Logic Gates
- Open Access
- 30 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 172359-172370
Energy-Efficient Buffer-Based Ternary SRAM Cell With Application to Image Processing
This paper presents a design of a variation-resilient and energy-efficient ternary memory cell (TSRAM) suited for power-demanding IoT applications that run on batteries. The TSRAM cell utilizes a latch composed of an efficient ternary buffer (TBUF) with positive feedback, a single-bitline, and a transmission gate for switching access, with an overall area only about 39% more than binary 6T SRAM. The threshold voltage (V_th) tuning of CNTFET devices has been explored to achieve the three storage levels. Simulations were conducted using the Standard 32-nm CNTFET model file in the Synopsis HSPICE simulator. The projected design offers substantial reductions of 54.94% in read power, 67.06% in write power, and 21.59% in area compared to the best buffer-based TSRAM designs. These power savings are achieved by minimizing the transistor count and eliminating any direct current path between VDD and ground in the TBUF design for getting logic ‘1’. Furthermore, the proposed design demonstrates the highest logic ‘1’ static noise margin (SNM1) and shows resilience to process, voltage, and temperature (PVT) variations. The TSRAM electrical quality matrix (TEQM), a crucial figure of merit, indicates the superior performance of the proposed design for IoT applications. The study was further extended to conduct simulations and report the performance metrics of the proposed TSRAM array. Ultimately, to evaluate the real-world application of the triple memory structures, the pixel-by-pixel storage process of a grayscale image with three-value data content is performed based on a hardware algorithm. The obtained results demonstrate that the proposed TSRAM architecture has about a 26.3% improvement in hardware performance compared to its highest performing counterpart scheme.
- 30 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 172359-172370
Open AccessEnergy-Efficient Buffer-Based Ternary SRAM Cell With Application to Image Processing
This paper presents a design of a variation-resilient and energy-efficient ternary memory cell (TSRAM) suited for power-demanding IoT applications that run on batteries. The TSRAM cell utilizes a latch composed of an efficient ternary buffer (TBUF) with positive feedback, a single-bitline, and a transmission gate for switching access, with an overall area only about 39% more than binary 6T SRAM. The threshold voltage (V_th) tuning of CNTFET devices has been explored to achieve the three storage levels. Simulations were conducted using the Standard 32-nm CNTFET model file in the Synopsis HSPICE simulator. The projected design offers substantial reductions of 54.94% in read power, 67.06% in write power, and 21.59% in area compared to the best buffer-based TSRAM designs. These power savings are achieved by minimizing the transistor count and eliminating any direct current path between VDD and ground in the TBUF design for getting logic ‘1’. Furthermore, the proposed design demonstrates the highest logic ‘1’ static noise margin (SNM1) and shows resilience to process, voltage, and temperature (PVT) variations. The TSRAM electrical quality matrix (TEQM), a crucial figure of merit, indicates the superior performance of the proposed design for IoT applications. The study was further extended to conduct simulations and report the performance metrics of the proposed TSRAM array. Ultimately, to evaluate the real-world application of the triple memory structures, the pixel-by-pixel storage process of a grayscale image with three-value data content is performed based on a hardware algorithm. The obtained results demonstrate that the proposed TSRAM architecture has about a 26.3% improvement in hardware performance compared to its highest performing counterpart scheme.
- Open Access
- 22 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 166222-166240
A CNTFET-Based 10T Static Memory Design Immune to Read and Half-Select Disturbs for Low-Power Wearable Biomedical Systems
This paper introduces a novel 10T SRAM cell optimized for low-power, high-reliability biomedical wearable systems. The proposed design features a read-assist mechanism to suppress read disturbs, enhancing read static noise margin (RSNM), while a decoupled pull-down path for the ‘0’ storage node improves write SNM (WSNM). Leveraging Stanford CNTFET models, HSPICE simulations reveal a 1.12× and 14.02× enhancement in RSNM and WSNM, respectively, at 0.3V over the conventional 6T cell. Additionally, the design achieves substantial power savings—3.02× (read), 1.97× (write), and 1.89× (leakage)—compared to state-of-the-art 9T/10T CNTFET SRAMs. Monte Carlo analysis further demonstrates superior robustness, with 2.38× and 6.62× higher yield in RSNM and WSNM at 0.3V, validating its reliability for energy-constrained biomedical applications.
- 22 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 166222-166240
Open AccessA CNTFET-Based 10T Static Memory Design Immune to Read and Half-Select Disturbs for Low-Power Wearable Biomedical Systems
This paper introduces a novel 10T SRAM cell optimized for low-power, high-reliability biomedical wearable systems. The proposed design features a read-assist mechanism to suppress read disturbs, enhancing read static noise margin (RSNM), while a decoupled pull-down path for the ‘0’ storage node improves write SNM (WSNM). Leveraging Stanford CNTFET models, HSPICE simulations reveal a 1.12× and 14.02× enhancement in RSNM and WSNM, respectively, at 0.3V over the conventional 6T cell. Additionally, the design achieves substantial power savings—3.02× (read), 1.97× (write), and 1.89× (leakage)—compared to state-of-the-art 9T/10T CNTFET SRAMs. Monte Carlo analysis further demonstrates superior robustness, with 2.38× and 6.62× higher yield in RSNM and WSNM at 0.3V, validating its reliability for energy-constrained biomedical applications.
- 3 September 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 7 (3) , 032302
Comparative evaluation of robust low-power SRAM architectures
As Internet-of-Things (IoT) devices proliferate, their reliance on energy-efficient and reliable embedded memory grows exponentially. Static random-access memory (SRAM) remains a cornerstone of modern system-on-chips, yet traditional 6T cells struggle with scalability, exhibiting read/write failures at reduced voltages and nanometer-scale process nodes. To overcome these limitations, novel SRAM architecture has emerged, prioritizing robustness, power efficiency, and performance without compromising the silicon area. This work conducts a rigorous comparative study of advanced SRAM topologies in 16-nm CMOS technology, evaluating their resilience under process, voltage, and temperature fluctuations. The Schmitt-trigger-based 11T (ST11T) cell enhances data retention and read margins by a factor of 1.18, leveraging feedback-stabilized inverters and an isolated read pathway. In contrast, the differential 10T (known as ST2) variant improves writability by 3% through its dual-ended access scheme. While the low leakage 8T (LP8T) design cuts read latency by 8% and standby power by nearly an order of magnitude, its hold stability proves inferior due to disabled tail transistors in idle mode. The baseline 6T cell retains advantages in write speed and area efficiency, whereas the single-ended WRE8T topology reduces active power consumption by 55% through simplified signaling. Overall, the differential-V GND 10T (Dvgnd10T) cell emerges as the most promising candidate based on a figure-of-merit (FoM) analysis, making it well-suited for IoT-enabled portable devices. The findings of this study provide valuable insights into SRAM designers to benchmark future designs.
- 3 September 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 7 (3) , 032302
Comparative evaluation of robust low-power SRAM architectures
As Internet-of-Things (IoT) devices proliferate, their reliance on energy-efficient and reliable embedded memory grows exponentially. Static random-access memory (SRAM) remains a cornerstone of modern system-on-chips, yet traditional 6T cells struggle with scalability, exhibiting read/write failures at reduced voltages and nanometer-scale process nodes. To overcome these limitations, novel SRAM architecture has emerged, prioritizing robustness, power efficiency, and performance without compromising the silicon area. This work conducts a rigorous comparative study of advanced SRAM topologies in 16-nm CMOS technology, evaluating their resilience under process, voltage, and temperature fluctuations. The Schmitt-trigger-based 11T (ST11T) cell enhances data retention and read margins by a factor of 1.18, leveraging feedback-stabilized inverters and an isolated read pathway. In contrast, the differential 10T (known as ST2) variant improves writability by 3% through its dual-ended access scheme. While the low leakage 8T (LP8T) design cuts read latency by 8% and standby power by nearly an order of magnitude, its hold stability proves inferior due to disabled tail transistors in idle mode. The baseline 6T cell retains advantages in write speed and area efficiency, whereas the single-ended WRE8T topology reduces active power consumption by 55% through simplified signaling. Overall, the differential-V GND 10T (Dvgnd10T) cell emerges as the most promising candidate based on a figure-of-merit (FoM) analysis, making it well-suited for IoT-enabled portable devices. The findings of this study provide valuable insights into SRAM designers to benchmark future designs.
- Open Access
- 12 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 142304-142317
A Soft Error Self-Resilience Radiation-Hardened 14T SRAM for Aerospace Applications
Various charged particles in space threaten memory circuit integrity and dependability, including photons, alpha particles, and high-energy ions outside the Low Earth Orbit region. These particles particularly affect conventional 6T SRAM by disrupting stored bits, leading researchers to explore radiation-hardened SRAM chips and the addition of extra nodes to memory cells to recover lost data. A novel self resilience radiation-hardened 14T (SRRH-14T) SRAM cell with redundant nodes is presented in this work to solve the soft error problem. The suggested SRRH-14T memory performance compared to well-known radiation-hardened cells, such as 6T-SRAM, Quatro-10T, SEA-14T, RH-14T, QCCS-12T, and RRS-14T. The proposed SRRH-14T memory cell applies to a minimal sensitive node layout area separation to protect against multiple node interruptions. Additionally, the proposed SRRH-14T demonstrates performance enhancements of 1.22x, 1.03x, 1.09x, 1.06x, and 1.02x relative to 6T-SRAM, Quatro-10T, SEA-14T, RH-14T, and RRS-14T, respectively.
- 12 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 142304-142317
Open AccessA Soft Error Self-Resilience Radiation-Hardened 14T SRAM for Aerospace Applications
Various charged particles in space threaten memory circuit integrity and dependability, including photons, alpha particles, and high-energy ions outside the Low Earth Orbit region. These particles particularly affect conventional 6T SRAM by disrupting stored bits, leading researchers to explore radiation-hardened SRAM chips and the addition of extra nodes to memory cells to recover lost data. A novel self resilience radiation-hardened 14T (SRRH-14T) SRAM cell with redundant nodes is presented in this work to solve the soft error problem. The suggested SRRH-14T memory performance compared to well-known radiation-hardened cells, such as 6T-SRAM, Quatro-10T, SEA-14T, RH-14T, QCCS-12T, and RRS-14T. The proposed SRRH-14T memory cell applies to a minimal sensitive node layout area separation to protect against multiple node interruptions. Additionally, the proposed SRRH-14T demonstrates performance enhancements of 1.22x, 1.03x, 1.09x, 1.06x, and 1.02x relative to 6T-SRAM, Quatro-10T, SEA-14T, RH-14T, and RRS-14T, respectively.