Fabio Delano Penha Marques Torres
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Fabio Delano Penha Marques Torres has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Renata Barbosa
Postgraduate Program in Materials Science and Engineering Federal University of Piauí (UFPI) Teresina Piauí Brazil
3 shared publications - Tatianny Soares Alves
Postgraduate Program in Materials Science and Engineering Federal University of Piauí (UFPI) Teresina Piauí Brazil
3 shared publications - Allef Gabriel da Silva Fortes
Universidade Federal do Piauí, Brasil
2 shared publications - Arthur Antônio Sousa Sampaio
Universidade Federal do Piauí, Brasil
2 shared publications - Iago Rodrigues de Abreu
Universidade Federal do Piauí, Brasil
2 shared publications - Renato de Sousa Nascimento Junior
Universidade Federal do Piauí (UFPI), Brasil
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Polímeros
- Vol. 36 (2)
From filaments to membranes: additive manufacturing of Ecovio® for oil–water separation
This study explored Ecovio®-based filaments and 3D-printed membranes functionalized with zinc oxide (ZnO), biocide (BCD), and carnauba wax (CW) for gravity-driven oil–water separation. Filaments and membranes were produced via fused filament fabrication in grid and triangular geometries and characterized through melt flow index, water absorption, optical microscopy, contact angle, and separation performance. ZnO increased melt flow and long-term water absorption, whereas CW reduced water absorption and increased surface hydrophobicity. Optical microscopy revealed composition-dependent pore architectures ranging from ≈ 355 to 668 µm, directly affecting permeation behavior. Membranes delivered high permeation fluxes, exceeding 1.10 × 107 L·m−2·h−1 under gravity-driven operation. The integrated results showed that tailored filler combinations and infill geometries enable tunable hydrophilicity, porosity, and flux, establishing Ecovio® composites as a sustainable and viable platform for additive manufacturing of oil–water separation membranes.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Polímeros
- Vol. 36 (2)
Open AccessFrom filaments to membranes: additive manufacturing of Ecovio® for oil–water separation
This study explored Ecovio®-based filaments and 3D-printed membranes functionalized with zinc oxide (ZnO), biocide (BCD), and carnauba wax (CW) for gravity-driven oil–water separation. Filaments and membranes were produced via fused filament fabrication in grid and triangular geometries and characterized through melt flow index, water absorption, optical microscopy, contact angle, and separation performance. ZnO increased melt flow and long-term water absorption, whereas CW reduced water absorption and increased surface hydrophobicity. Optical microscopy revealed composition-dependent pore architectures ranging from ≈ 355 to 668 µm, directly affecting permeation behavior. Membranes delivered high permeation fluxes, exceeding 1.10 × 107 L·m−2·h−1 under gravity-driven operation. The integrated results showed that tailored filler combinations and infill geometries enable tunable hydrophilicity, porosity, and flux, establishing Ecovio® composites as a sustainable and viable platform for additive manufacturing of oil–water separation membranes.
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 29
Development of Activated Carbon-Modified Polymer Composites for Application in Hydroponic Systems
Contemporary agriculture faces the challenge of reconciling productivity and sustainability, making hydroponics a promising alternative. However, the lack of biodegradable materials that combine mechanical performance, stability, and compatibility with nutrient solutions limits its expansion. In this context, this study proposes innovative composites based on poly (butylene adipate-co-terephthalate) (PBAT), functionalized with activated carbon (AC) and the cationic surfactant CTAB, targeting applications in hydroponic systems. The formulations (PBAT, PBAT/5AC, PBAT/5AC/1CTAB, and PBAT/5AC/2CTAB) were processed by extrusion and injection and characterized by mechanical testing (ASTM D638), thermogravimetric analysis (TGA/DTG), scanning electron microscopy (SEM), and contact angle (ASTM D7334-08). CTAB acted as a functionalizing agent, improving CA dispersion and reducing agglomerates, which resulted in gains of 15.53% in the modulus of elasticity and 4.05% in tensile strength, in addition to greater surface hydrophilicity. Despite lower thermal stability, the properties obtained favor the adhesion of aqueous solutions, making the composites promising for sustainable substrates and components in hydroponic cultivation.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 29
Open AccessDevelopment of Activated Carbon-Modified Polymer Composites for Application in Hydroponic Systems
Contemporary agriculture faces the challenge of reconciling productivity and sustainability, making hydroponics a promising alternative. However, the lack of biodegradable materials that combine mechanical performance, stability, and compatibility with nutrient solutions limits its expansion. In this context, this study proposes innovative composites based on poly (butylene adipate-co-terephthalate) (PBAT), functionalized with activated carbon (AC) and the cationic surfactant CTAB, targeting applications in hydroponic systems. The formulations (PBAT, PBAT/5AC, PBAT/5AC/1CTAB, and PBAT/5AC/2CTAB) were processed by extrusion and injection and characterized by mechanical testing (ASTM D638), thermogravimetric analysis (TGA/DTG), scanning electron microscopy (SEM), and contact angle (ASTM D7334-08). CTAB acted as a functionalizing agent, improving CA dispersion and reducing agglomerates, which resulted in gains of 15.53% in the modulus of elasticity and 4.05% in tensile strength, in addition to greater surface hydrophilicity. Despite lower thermal stability, the properties obtained favor the adhesion of aqueous solutions, making the composites promising for sustainable substrates and components in hydroponic cultivation.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Polímeros
- Vol. 34 (3) , e20240025
Thermal and mechanical properties of filaments for additive manufacturing
This study explores the development of biodegradable filaments for additive manufacturing, aiming to create membranes for oil and water separation. Using a mixture of poly (lactic acid) and poly (butylene adipate co-terephthalate) (PLA/PBAT) with additives such as zinc oxide, biocide and carnauba wax. The research evaluates the potential of these materials in membrane prototyping for this application. Characterization techniques such as FTIR, XRD, DSC and tensile strength were employed. The results showed that the addition of the additives did not induce the formation of new bands in the FTIR. However, new diffraction peaks appeared in the composites indicating the presence of the zinc oxide. DSC revealed a double peak in melting and crystallization temperatures and the mechanical tests showed significant influence of additives on tensile strength. The composite filaments proved to be suitable for 3D printing, suggesting their applicability in the manufacture of filter membranes for oil and water separation.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Polímeros
- Vol. 34 (3) , e20240025
Open AccessThermal and mechanical properties of filaments for additive manufacturing
This study explores the development of biodegradable filaments for additive manufacturing, aiming to create membranes for oil and water separation. Using a mixture of poly (lactic acid) and poly (butylene adipate co-terephthalate) (PLA/PBAT) with additives such as zinc oxide, biocide and carnauba wax. The research evaluates the potential of these materials in membrane prototyping for this application. Characterization techniques such as FTIR, XRD, DSC and tensile strength were employed. The results showed that the addition of the additives did not induce the formation of new bands in the FTIR. However, new diffraction peaks appeared in the composites indicating the presence of the zinc oxide. DSC revealed a double peak in melting and crystallization temperatures and the mechanical tests showed significant influence of additives on tensile strength. The composite filaments proved to be suitable for 3D printing, suggesting their applicability in the manufacture of filter membranes for oil and water separation.