RMRamin Meshkabadi

Ramin Meshkabadi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ramin Meshkabadi has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Low‐voltage anodizing of AZ91 magnesium alloy: surface morphology and corrosion behaviour assessed by impedance analysis

    by Z. Nasiri Kolahi, V. Pouyafar, R. Meshkabadi, A. Mostafapour

    Magnesium alloys, particularly AZ91, have emerged as promising candidates for biomedical implants due to their low density, biocompatibility, and mechanical properties resembling natural bone. However, their high chemical reactivity and poor corrosion resistance in physiological environments remain major limitations. This study investigates the effect of low‐voltage anodizing on the surface morphology, porosity, corrosion resistance, and hardness of AZ91 alloy using a phosphate‐based electrolyte composed of 0.2 M K 3 PO 4 and 0.6 M K 2 HPO 4 . A series of anodizing treatments were conducted at voltages ranging from 0.5 V to 1.5 V and durations of 10 min, 20 min, and 30 min. Surface characterization via scanning electron microscopy (SEM) and porosity analysis revealed that the optimal condition—1.5 V for 20 minutes — produced the most compact and uniform oxide layer with minimal porosity. Electrochemical impedance spectroscopy confirmed enhanced corrosion resistance under these conditions, while hardness testing demonstrated significant improvement in surface hardness. These findings suggest that low‐voltage anodizing is a viable strategy for improving the durability and performance of AZ91 magnesium alloy toward potential biodegradable applications.

  • Open Access

    Numerical investigation of die thickness and height effects on temperature distribution and energy consumption during spark plasma sintering of TiB2

    by Ramin Meshkabadi, Milad Sakkaki, Vahid Pouyafar

    Precise temperature control during spark plasma sintering is critically important because it directly affects densification kinetics, microstructural evolution, and the final mechanical properties of the sintered component. However, direct temperature measurement inside the tooling remains experimentally inaccessible, and the complex interactions among electro-thermal coupling, contact resistances, and tooling geometry make process optimization particularly challenging. Numerical and experimental studies specifically addressing conductive TiB2 ceramics remain limited. This work establishes a coupled electro‑thermal finite element model, validated against experimental pyrometer data, to evaluate the effects of die wall thickness (7 mm, 14 mm, and 28 mm) and die height (11 mm, 22 mm, and 35 mm) on current and temperature distribution, thermal uniformity, heating rates, and energy consumption while fully incorporating electrical and thermal contact resistances and graphite sheet interlayers. Results demonstrate that die height dominates thermal performance. Increasing height from 11 mm to 35 mm reduces the sample center temperature from 1932 °C to 1754 °C, while increasing the die surface radiative loss from 1675 W to 3592 W. The heating rate at the sample center decreases from 140 °C/min to 116 °C/min as height increases to 35 mm, while the die surface heating rate drops more sharply from 130 °C/min to 80 °C/min, widening the difference from 10 °C/min to 36 °C/min. In contrast, increasing wall thickness from 7 mm to 28 mm raises radiative loss more modestly from 2351 W to 2792 W, while the sample center temperature declines from 1992 °C to 1878 °C. The heating rate at the sample center decreases from 150 °C/min to 116 °C/min, and the die surface heating rate drops from 120 °C/min to 76 °C/min. The required input power to maintain 1900 °C at the sample center is lowest for the 7 mm thick die (9596 W). For die height, the 22 mm configuration minimizes power consumption (10103 W) by surrounding the punch and reducing heat accumulation inside it, whereas increasing the height to 35 mm yields no additional energy savings due to increased die surface losses. These findings quantitatively establish die height as the primary lever for controlling current focusing and thermal efficiency.

  • Open Access

    Fabrication, application, and phase formation rules in high-entropy alloys

    by Milad Sakkaki, Vahid Pouyafar, Ramin Meshkabadi, Mehdi Shahedi Asl

    High entropy alloys (HEAs) have become the focus of research and industrial attention as a new class of advanced engineering materials due to their exceptional properties and performance. Generally, HEAs exhibit superior performance compared to traditional alloys, especially when they form FCC or BCC single-phase solid solutions. However, achieving such systems is beyond simple mixing of elements and is not always straightforward. It strongly depends on element selection, deliberate design of compositions, processing strategies, and thermodynamic control. Given the vast compositional space of HEAs, the use of predictive tools is Inevitable. Phase formation rules, as an empirical approach, have become effective and valuable tools for accelerating the screening of single-phase FCC or BCC alloys and minimizing trial-and-error efforts due to their low cost, time-saving nature, and simplicity. In this regard, the present review elaborated quantitatively and conceptually the thermodynamic parameters such as Gibbs free energy of mixing (ΔG mix ), configurational entropy (ΔS mix ), enthalpy of mixing (ΔH mix ), and the prediction parameter for solid solution formation (Ω), along with Hume-Rothery criteria, including atomic size difference (δ), valence electron concentration (VEC), and electronegativity difference (Δχ). In addition, the processing and manufacturing routes, economic aspects, and applications of HEAs are discussed. This review provides a comprehensive overview of HEA with a practical framework from element selection, design, and fabrication techniques to the relationship between phase, properties, and performance. The present work bridges the gap between HEAs design, manufacturing processes, practical implementation, and application. Additionally, an overview of cost and manufacturing considerations has highlighted future research directions in targeted design, scalable production, and the industrial application of HEAs.


  • Conjoint influence of equal channel angular pressing and annealing on microstructure and mechanical properties of aluminum alloy 7075

    by V. Pouyafar, F. Malihi, R. Meshkabadi

    The effect of equal channel angular pressing combined with inter‐pass and post‐process annealing on the microstructure and mechanical properties of the Al‐7075 alloy has been studied. The samples underwent successful equal channel angular pressing for three passes using the Bc route. The most significant changes in mechanical properties were observed after the first pass. Despite an 88 % reduction in grain size, the hardness of the alloy increased by 45 % and the fracture toughness decreased by 75 %. Post‐process annealing was found to be an effective method for enhancing the alloy‘s toughness. Annealing the one‐pass sample at 310 °C resulted in a 33 % increase in fracture toughness; from 15.8 J to 21.02 J. Inter‐pass annealing had a lesser impact on improving fracture toughness compared to post‐process annealing. It can be concluded that a balanced combination of strength and toughness can be achieved by utilizing a combination of equal channel angular pressing and inter‐pass or post‐process annealing. Examination of the fracture surfaces of the samples revealed intragranular fractures, with the annealed samples exhibiting higher energy absorption during impact and better toughness compared to the non‐annealed sample.


  • Open Access

    Mechanical characterization of high volume fraction Al7075-Al2O3 composite fabricated by semisolid powder processing

    by Saeed Aghajani, Vahid Pouyafar, Ramin Meshkabadi, Alex A. Volinsky, Amir Bolouri

    The mechanical properties and physical characteristics of aluminum alloy composites can be significantly improved by adding reinforcing phases. However, the high loading of the reinforcement phase in Al7075-Al2O3 composites has not been thoroughly studied. In this work, a combination of semisolid metal powder processing and powder metallurgy is used to process and manufacture Al7075-Al2O3 composites with a high reinforcement fraction of > 40 vol.%. The effects of processing parameters on the microstructures and mechanical properties of the composite material are discussed in detail. The loading limits of the high volume Al2O3 reinforcement in Al7075 composites are identified and linked to the processing parameters. A methodology is introduced to estimate the consolidation temperature of Al7075 alloy using compaction testing. Al2O3 particles (the average particle size of 120 µm) were mechanically milled with Al7075 powder (the average particle size of 20 µm) for 10 min and 5 h using a high-energy planetary ball mill. The mixture was then compacted in the semisolid state at 615 °C under the compaction pressures of 50 MPa and 100 MPa. By increasing the milling time from 10 min to 5 h, the deformation of aluminum powders and the fracture of Al2O3 reinforcement particles occur, restricting the loading limit of reinforcement. The milling time also shows a dominant effect on the powder morphology, microstructure, and mechanical properties of Al7075-Al2O3 composites. Increasing compaction pressure from 50 to 100 MPa significantly improved the compressive strength of the composite from 218 to 652 MPa. Al7075-Al2O3 composite with 40 vol.% of reinforcing phase exhibits the highest hardness of 198.2 HV and 96.9% relative density when it is milled for 5 h and compacted at 100 MPa. However, this composite shows the highest strength of 652 MPa when it is milled for 10 min. By increasing the reinforcing phase to 50 vol.% and 60 vol.%, the hardness, density, and compressive strength of composites decreased. The composites with 60 vol.% of reinforcing phase appeared overloaded. Results show that semisolid metal powder processing has huge potential for the fabrication of high loading Al2O3 in Al7075 matrix with near theoretical density.