AAAngelica Maria Lozano Aguilar

Angelica Maria Lozano Aguilar

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Angelica Maria Lozano Aguilar has a total of 2 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of a Cr(VI) Treatment System Using Bacterial Cellulose Biomass and Eichhornia crassipes

    by Uriel Fernando Carreño Sayago, Vladimir Ballesteros Ballesteros, Angelica Maria Lozano Aguilar

    The indiscriminate discharge of heavy metals into bodies of water leads to the loss of their ecosystem services, affecting adjacent communities. An example of this is the discharge of industrial wastewater into the Tunjuelo River, south of Bogotá, which contains high concentrations of Cr(VI) and has had serious consequences in recent decades. Therefore, research has focused on the use of contaminant-adsorbing biomass, and a continuous-flow treatment of contaminated water has been tested to remove various heavy metals, such as chromium, mercury, and cadmium, using adsorbent biomasses of E. crassipes and bacterial cellulose. The combination of these biomasses would generate an ideal composite material due to the excellent adsorption capacity of bacterial cellulose and the support provided by the E. crassipes biomass, allowing for reuse through different elution processes. Using adsorption models, designs were developed to ensure adequate treatment of Cr(VI). Using these models, a treatment system was designed with different combinations of these biomasses, in which biomass (a) achieved 23.3 g of Cr(VI) removed per dollar, including the cumulative adsorption capacities, EDTA elutions, and reuses. It was concluded that this treatment system with these two biomasses is ideal for generating alternative treatments for heavy metals, especially Cr(VI).

  • Open Access

    Design of Biomass Adsorbents Based on Bacterial Cellulose and E. crassipes for the Removal of Cr (VI)

    by Uriel Fernando Carreño Sayago, Vladimir Ballesteros Ballesteros, Angelica María Lozano

    Cellulose has been identified as a medium for heavy metal removal due to its high adsorption capacity in relation to these contaminants. Furthermore, cellulose is abundant and can be obtained in a practical and easy way. A notable example is E. crassipes biomass, which is abundant in wetlands and has not yet been efficiently and sustainably removed. Another biomass that has been used in heavy metal removal projects is bacterial cellulose. Generating this biomass in a laboratory setting is imperative, given its 100% cellulose composition, which ensures optimal adsorption capacities during the development of heavy metal adsorbent systems. Therefore, the objective of this project was to design biomass adsorbents that combine the properties of bacterial and E. crassipes cellulose for Cr(VI) removal. The rationale for combining these two materials is based on the premise that it will produce optimal results, a hypothesis supported by the documented efficiency of bacterial cellulose and the formidable resilience of E. crassipes biomass to elution processes. The second-order model and the Langmuir isotherm fit proved to be the most suitable, indicating that there an occurred interaction between the adsorption sites of these biomasses and Cr (VI). This suggests the presence of a significant number of active sites on the surface of these materials. The EC(50)+BC(50) biomass, with an adsorption capacity of 42 g of Cr(VI) per dollar, is the most cost-effective due to the low cost of E. crassipes and the high capacity of bacterial cellulose. It is a mixture that guarantees high adsorption capacities and facilitates up to seven reuse cycles through elutions with ethylenediaminetetraacetic acid (EDTA). This finding emphasizes the potential of this material for implementation in environmental sustainability initiatives, particularly those focused on the removal of heavy metals, including Cr(VI).


  • Open Access

    Development of a Treatment System of Water with Cr (VI) Through Models Using E. crassipes Biomass with Iron Chloride

    by Uriel Fernando Carreño Sayago, Vladimir Ballesteros Ballesteros, Angelica María Lozano

    In the context of critical water quality issues, there is a pressing need for more pragmatic approaches to water research. Adsorbent biomass, derived from abundant and effective natural sources, holds considerable promise as a solution. E. crassipes, a type of plant biomass, has emerged as a particularly promising material due to its high adsorption capacity. When combined with iron chloride, this capacity is significantly enhanced, and the addition of EDTA is essential for the reuse of treated water. The economic viability of this material in water treatment has been thoroughly evaluated, and the project was developed with the aim of building treatment systems using E. crassipes biomass in conjunction with iron chloride. The development process involved the creation of a special material composed of 85% dried and ground E. crassipes and 15% iron chloride. The process was scaled up with the most effective biomass for treatment and subsequent elutions with EDTA. The outlet conditions, the quantity of pollutant removed, and the treated volume were established, and subsequently the extraparticle diffusion constant Kf, the intraparticle diffusion constant, and the characteristic isotherm were determined. The identification of the intraparticle diffusion model, Ks, was made possible by the results of the model, which indicated the specific route for the construction of a pilot-scale treatment system. The pilot-scale prototype was constructed using 1000 g of EC (2) of biomass (850 g of E. crassipes and 150 g of chloride of iron). The prototype developed in the present investigation could be used to treat effluents contaminated with heavy metals, especially chromium, and is an advanced environmental research project that contributes to the improvement of water quality.


  • Open Access

    Bacterial Cellulose-Derived Sorbents for Cr (VI) Remediation: Adsorption, Elution, and Reuse

    by Uriel Fernando Carreño Sayago, Vladimir Ballesteros Ballesteros, Angelica María Lozano Aguilar

    The search for adsorbents that are non-toxic and low cost with a high adsorption capacity and excellent recyclability is a priority to determine the way to reduce the serious environmental impacts caused by the discharge of effluents loaded with heavy metals. Bacterial cellulose (BC) biomass has functional groups such as hydroxyl and carbonyl groups that play a crucial role in making this cellulose so efficient at removing contaminants present in water through cation exchange. This research aims to develop an experimental process for the adsorption, elution, and reuse of bacterial cellulose biomass in treating water contaminated with Cr (VI). SEM images and the kinetics behavior were analyzed with pseudo-first- and pseudo-second-order models together with isothermal analysis after each elution and reuse process. The adsorption behavior was in excellent agreement with the Langmuir model along with its elution and reuse; the adsorption capacity was up to 225 mg/g, adding all the elution processes. This study presents a novel approach to the preparation of biomass capable of retaining Cr (VI) with an excellent adsorption capacity and high stability. This method eliminates the need for chemical agents, which would otherwise be difficult to implement due to their costs. The viability of this approach for the field of industrial wastewater treatment is demonstrated.


  • Open Access

    Designing, Modeling and Developing Scale Models for the Treatment of Water Contaminated with Cr (VI) through Bacterial Cellulose Biomass

    by Uriel Fernando Carreño Sayago, Vladimir Ballesteros Ballesteros, Angelica Maria Lozano Aguilar

    The present research presents a method for scaling up a continuous treatment system with bacterial cellulose biomass for the removal of contaminants on a large industrial scale from effluents loaded with chromium (VI). This consisted of a laboratory-scale modeling process of the chromium (VI) adsorption processes, which would provide the necessary parameters to build a system on an industrial scale. The research also involved designing, modeling and developing scale models for the treatment of water contaminated with chromium (VI) through bacterial cellulose biomass. The results of the model indicated the specific route for the construction of a treatment system on an industrial scale, with the experimental data adjusted to achieve this objective. The pilot scale prototype was built using 450 g of biomass, including elution processes, with the data obtained from the aforementioned processes. In general, the excellent efficiency of the two models at different scales, together with the excellent elution results, suggests that this prototype could be presented to polluting industries for the treatment of water from different industrial effluents, being an advanced biotechnology for the treatment of industrial wastewater.