Shuqing Xing
Research Subjects
Research Interests
Shuqing Xing has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Xiaolan Kang
Baotou Vocational and Technical College
2 shared publicationsYonglin Ma
School of Materials and Metallurgy, Inner Mongolia University of Science and Technology, Baotou, China
2 shared publicationsChen Zhongyii
School of Materials and Metallurgy, Inner Mongolia University of Science and Technology, Baotou, China
1 shared publication- Lijuan Shen
School of Materials and Metallurgy, Inner Mongolia University of Science and Technology, Baotou, China
1 shared publication - Long Zhao
Inner Mongolia University of Science and Technology
1 shared publication Qingwei Bai
School of Material and Metallurgy , Inner Mongolia University of Science & Technology, Baotou , P. R. China
1 shared publication
Latest Publications
- Open Access
- 3 November 2026
- Published by AIP Publishing in International Journal of Fluid Engineering
- Vol. 4 (2)
Optimization design of a new pulsed magnetic field furnace head box for copper alloy casting based on COMSOL
This study employs COMSOL Multiphysics to model the electromagnetic field and melt flow field in a novel pulsed magnetic field furnace head box developed for copper alloy casting. The simulations indicate a relatively weak magnetic induction intensity in the central region of the head box. Furthermore, it is observed that the melt flow rate at the central outlet at the bottom of the head box is relatively high. To address these issues, various types of baffles within the head box, including cross-sectional and V-shaped structures, are designed. Their characteristics, such as dimensions, placement, and the opening angle of the V-shaped baffle, are refined through simulation trials. An analysis is conducted of the impact of pulsed magnetic field treatment on melt volume, flow characteristics, and internal pressure distribution. The optimal solution identified is the V-shaped baffle. Two limiting states of the V-shaped baffle are proposed on the basis of numerical simulations, considering specific placement positions within the box together with empirical formulas. The V-shaped baffle facilitates uniform flow of molten copper toward the electromagnetic field’s effective working zone, enhancing processing efficiency. Additionally, it boosts the melt flow rate in stagnant regions near the head box periphery. This configuration enhances electromagnetic treatment efficiency, leading to an overall improvement in the casting quality of furnace head boxes in groups of electromagnetic-equipped copper melting furnaces.
- 3 November 2026
- Published by AIP Publishing in International Journal of Fluid Engineering
- Vol. 4 (2)
Open AccessOptimization design of a new pulsed magnetic field furnace head box for copper alloy casting based on COMSOL
This study employs COMSOL Multiphysics to model the electromagnetic field and melt flow field in a novel pulsed magnetic field furnace head box developed for copper alloy casting. The simulations indicate a relatively weak magnetic induction intensity in the central region of the head box. Furthermore, it is observed that the melt flow rate at the central outlet at the bottom of the head box is relatively high. To address these issues, various types of baffles within the head box, including cross-sectional and V-shaped structures, are designed. Their characteristics, such as dimensions, placement, and the opening angle of the V-shaped baffle, are refined through simulation trials. An analysis is conducted of the impact of pulsed magnetic field treatment on melt volume, flow characteristics, and internal pressure distribution. The optimal solution identified is the V-shaped baffle. Two limiting states of the V-shaped baffle are proposed on the basis of numerical simulations, considering specific placement positions within the box together with empirical formulas. The V-shaped baffle facilitates uniform flow of molten copper toward the electromagnetic field’s effective working zone, enhancing processing efficiency. Additionally, it boosts the melt flow rate in stagnant regions near the head box periphery. This configuration enhances electromagnetic treatment efficiency, leading to an overall improvement in the casting quality of furnace head boxes in groups of electromagnetic-equipped copper melting furnaces.
- 5 September 2024
- Published by Springer Nature in JOM
- Vol. 76 (11) , 6660-6670
Effect of Pulsed Magnetic Field on Carbide Banding of GCr15 Bearing Steel
- 5 September 2024
- Published by Springer Nature in JOM
- Vol. 76 (11) , 6660-6670
Effect of Pulsed Magnetic Field on Carbide Banding of GCr15 Bearing Steel
- 17 January 2018
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 27 (2) , 857-863
Nucleation and Grain Refinement of 7A04 Aluminum Alloy Under a Low-Power Electromagnetic Pulse
- 17 January 2018
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 27 (2) , 857-863
Nucleation and Grain Refinement of 7A04 Aluminum Alloy Under a Low-Power Electromagnetic Pulse
- 31 January 2017
- Published by Walter de Gruyter GmbH in International Journal of Materials Research
- Vol. 108 (2) , 99-107
Study on the welding continuous cooling transformation and weldability of SA508Gr4 steel for nuclear pressure vessels
SA508Gr4 is a newly developed high-strength steel for nuclear reactor pressure vessels. Its welding characteristics remain largely unexplored. In this work, the simulated heat affected zone continuous cooling transformation (SH-CCT) diagram of SA508Gr4 steel was constructed and the high-temperature cooling phase compositions and the properties of the heat affected zone (HAZ) were characterized using dilatometry and microscopic tests. The results show that the phase transformation in the HAZ was divided into bainite and martensite transformation stages. When 4.6 ≤ t 8/5 (the HAZ cooling time from 800 °C to 500 °C) ≤ 15 s, lath-shaped martensite was fully developed, resulting in extensive hardening and cold cracking in the HAZ, while the cooling time required to form the bainite completely exceeds 1 200 s. Thus, to improve weld quality, preheating to 196 °C or higher is recommended.
- 31 January 2017
- Published by Walter de Gruyter GmbH in International Journal of Materials Research
- Vol. 108 (2) , 99-107
Study on the welding continuous cooling transformation and weldability of SA508Gr4 steel for nuclear pressure vessels
SA508Gr4 is a newly developed high-strength steel for nuclear reactor pressure vessels. Its welding characteristics remain largely unexplored. In this work, the simulated heat affected zone continuous cooling transformation (SH-CCT) diagram of SA508Gr4 steel was constructed and the high-temperature cooling phase compositions and the properties of the heat affected zone (HAZ) were characterized using dilatometry and microscopic tests. The results show that the phase transformation in the HAZ was divided into bainite and martensite transformation stages. When 4.6 ≤ t 8/5 (the HAZ cooling time from 800 °C to 500 °C) ≤ 15 s, lath-shaped martensite was fully developed, resulting in extensive hardening and cold cracking in the HAZ, while the cooling time required to form the bainite completely exceeds 1 200 s. Thus, to improve weld quality, preheating to 196 °C or higher is recommended.