Stephen T. Gordon

Direct Contact Membrane Distillation (DCMD) uses low heat sources to separate water from urea, which was then used as a plasticizer in regolith-based cement to make it more workable. The work investigated separating potable water and urea from artificial urine using DCMD and then characterizing the products. Water was successfully separated from the artificial urine solution as characterized by density, conductivity, pH, and substance concentrations. The concentrated urine solution was used in regolith-based cement cured under vacuum at temperatures that simulated temperatures that would be expected in construction on the Moon. Workability and other properties were improved by replacing water with concentrated urine solution in the mix.

The development of each nation is evaluated by its infrastructure, and each nation is competing with the others in infrastructure advancement, especially in the construction of roadways, since they play a vital role in the economic and social development of the nation. The conventional materials used for road construction are concrete and asphalt, which pose significant environmental challenges. This research gives insight into the potential of fly ash (FA) and corn stover (CS) in synthesizing geopolymer, as an alternative material for the construction of roads. This study examines the impact of three FA and CS mixture percentages and the particle size of CS on the compressive strength and porosity of geopolymer. The results indicate that incorporating larger amounts of CS in fly ash-based geopolymer may decrease the compressive strength of the geopolymer. Smaller CS particle sizes also tend to lead to lower compressive strength. Porosity of the geopolymer tended to increase with the incorporation of higher percentages of CS, particularly for smaller corn stover sizes. As a fine aggregate replacement for geopolymer, CS incorporation has the potential to reduce mined aggregate obtained from a process that harms the environment.