Qusay Al-Obaidi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Qusay Al-Obaidi has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
Abbas J. Sultan
Chemical Engineering Department , University of Technology , Baghdad , Iraq
1 shared publication- Alaa Dhari Jawad Al-Bayati
Department of Chemical Engineering and Petroleum Industries, Al-Mustaqbal University College, Hilla 51001, Iraq
1 shared publication - Ammar W. Saeed
College of Engineering, Alkarkh University of Science, Baghdad, Iraq
1 shared publication - Ansam Adil Mohammed
Department of Mechanical Engineering, College of Engineering, Al-Nahrain University, Jadriya, Baghdad, Iraq
1 shared publication - Buthainah Ali Al-Timimi
Department of Petroleum Refining Engineering and Gas Technology, College of Chemical Engineering, University of Technology –Iraq, Baghdad, Iraq
1 shared publication Dhorgham Skban Ibrahim
Petroleum and Natural Gas Institute, Faculty of Earth Science and Engineering , University of Miskolc , 3515, Egy- etemvaros, Miskolc , Hungary
1 shared publication
Latest Publications
- Open Access
- 30 December 2025
- Published by EngiScience Publisher in Journal of Studies in Science and Engineering
- Vol. 5 (2) , 240-252
Removal of Bromothymol Blue from Industrial Wastewater using Manganese Oxide-Titanium Dioxide/ Multi-Walled Carbon Nanotubes Nanocomposite
Industrial wastewater treatment techniques for pollutant removal have restrictions due to their high cost and low efficiency. The objective of this recent work is to develop high-performance nanocomposites to remove the bromothymol blue dye (BTB) from industrial wastewater. The nanocomposites developed and tested are composed of manganese oxide-titanium dioxide/Multi-walled carbon nanotubes (Mn/Ti/MWCNTs) nanoparticles of various concentrations. The synthesized nanocomposites have been characterized using X-ray diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDX), and Field Emission Scanning Electron Microscopy (FESEM) techniques. Results show that the addition of metal oxide nanoparticles to the MWCNTs matrix significantly enhanced removal efficiency. The developed Mn/Ti/MWCNTs nanocomposite achieved 78% removal of BTB from industrial wastewater. The Mn-Ti/CNTs nanocomposite exhibits a removal enhancement of MWCNTs alone was 45% and 32% over TiO₂:MnO₂ nanocomposite. The results of the current study demonstrate that the hybrid nanocomposite offers efficient removal of BTB from dye industrial wastewater compared to nano elements alone.
- 30 December 2025
- Published by EngiScience Publisher in Journal of Studies in Science and Engineering
- Vol. 5 (2) , 240-252
Open AccessRemoval of Bromothymol Blue from Industrial Wastewater using Manganese Oxide-Titanium Dioxide/ Multi-Walled Carbon Nanotubes Nanocomposite
Industrial wastewater treatment techniques for pollutant removal have restrictions due to their high cost and low efficiency. The objective of this recent work is to develop high-performance nanocomposites to remove the bromothymol blue dye (BTB) from industrial wastewater. The nanocomposites developed and tested are composed of manganese oxide-titanium dioxide/Multi-walled carbon nanotubes (Mn/Ti/MWCNTs) nanoparticles of various concentrations. The synthesized nanocomposites have been characterized using X-ray diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDX), and Field Emission Scanning Electron Microscopy (FESEM) techniques. Results show that the addition of metal oxide nanoparticles to the MWCNTs matrix significantly enhanced removal efficiency. The developed Mn/Ti/MWCNTs nanocomposite achieved 78% removal of BTB from industrial wastewater. The Mn-Ti/CNTs nanocomposite exhibits a removal enhancement of MWCNTs alone was 45% and 32% over TiO₂:MnO₂ nanocomposite. The results of the current study demonstrate that the hybrid nanocomposite offers efficient removal of BTB from dye industrial wastewater compared to nano elements alone.
- Open Access
Efficient Oily Wastewater Treatment via Electrocoagulation: Process Optimization and Sludge Analysis
Oily wastewater treatment is crucial for protecting the environment and ensuring sustainable water use. The current study examines the effectiveness of electrocoagulation in treating oily wastewater by conducting several batch experiments designed to determine the best operating conditions. Various factors affecting the performance of electrocoagulation, such as applied current density, electrode type, and pH, were studied. The results indicate that, under ideal conditions, electrocoagulation worked very well. The best results were obtained by involving an applied current density of 6 mA/cm2, a mild steel anode, and a pH of 6.7. Under these conditions, the process removed 94% of the chemical oxygen demand (COD) from the oily wastewater. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDAX) were used to characterize the residual sludge left in the reactor. The characterization results show that the oily pollutants were successfully removed through electroflotation. Additionally, oil precipitate particles were easily coated during the electrocoagulation operation. The findings show that electrocoagulation is an effective method for treating oil-contaminated wastewater.
Open AccessEfficient Oily Wastewater Treatment via Electrocoagulation: Process Optimization and Sludge Analysis
Oily wastewater treatment is crucial for protecting the environment and ensuring sustainable water use. The current study examines the effectiveness of electrocoagulation in treating oily wastewater by conducting several batch experiments designed to determine the best operating conditions. Various factors affecting the performance of electrocoagulation, such as applied current density, electrode type, and pH, were studied. The results indicate that, under ideal conditions, electrocoagulation worked very well. The best results were obtained by involving an applied current density of 6 mA/cm2, a mild steel anode, and a pH of 6.7. Under these conditions, the process removed 94% of the chemical oxygen demand (COD) from the oily wastewater. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDAX) were used to characterize the residual sludge left in the reactor. The characterization results show that the oily pollutants were successfully removed through electroflotation. Additionally, oil precipitate particles were easily coated during the electrocoagulation operation. The findings show that electrocoagulation is an effective method for treating oil-contaminated wastewater.
- Open Access
- 7 December 2024
- Published by Libyan Center for Solar Energy Research and Studies in Solar Energy and Sustainable Development journal
- Vol. 14 (1) , 522-539
Study of Prototypes for Biofuel Production Extraction from Biodegradation in Oxygen-Free Environments Processing Wastewater
Anaerobic digestion (AD), a proven and widely adopted technology, is used in life cycle analyses of energy systems. AD has been widely adopted for the management and treatment of both waste and wastewater. The product of this process is biogas, a mixture of methane gas (55-75% by volume) and carbon dioxide gas (25-45% by volume). This study contributes to ongoing research on renewable energy generation from waste and provides valuable insights into innovative waste processing. Biogas can be used for various energy production purposes, such as heating, converting it to high-quality natural gas, or generating electricity and heat together. AD plants are characterized by their technical simplicity and minimal energy and space requirements. The classification of anaerobic treatment systems is based on two categories: “high-speed” systems, which involve the retention of biomass, and “low-speed” systems, which do not involve the retention of biomass. High-speed systems have a relatively short hydraulic retention time and a long mass retention period, making them suitable for the treatment of many types of wastewater. Low-speed systems have traditionally been used for the degradation of slurries and solid wastes. This difference in retention times affects the types of waste each system is best suited for. AD reduces the amount of waste and generates valuable products, such as biogas. These systems were characterized by an extended hydraulic retention period, equivalent to the mass retention period. The biogas production process was subject to fluctuations depending on factors such as the nature and concentration of the raw materials as well as the prevailing process conditions. Biogas yields for the organic fraction of municipal solid waste and animal manure ranged from 80 to 200 m3/t and from 2 to 45 m3/m3, respectively. The co-digestion practice played an important role in enhancing the efficiency of the reactors and ensuring their economic viability. Improving the sale of all derivative products enhanced the economic efficiency of anaerobic treatment. Moreover, the implementation of financial incentives to promote renewable energy production significantly enhanced the competitiveness of anaerobic digestion compared to anaerobic composting, providing an optimistic outlook for the future of this technology.
- 7 December 2024
- Published by Libyan Center for Solar Energy Research and Studies in Solar Energy and Sustainable Development journal
- Vol. 14 (1) , 522-539
Open AccessStudy of Prototypes for Biofuel Production Extraction from Biodegradation in Oxygen-Free Environments Processing Wastewater
Anaerobic digestion (AD), a proven and widely adopted technology, is used in life cycle analyses of energy systems. AD has been widely adopted for the management and treatment of both waste and wastewater. The product of this process is biogas, a mixture of methane gas (55-75% by volume) and carbon dioxide gas (25-45% by volume). This study contributes to ongoing research on renewable energy generation from waste and provides valuable insights into innovative waste processing. Biogas can be used for various energy production purposes, such as heating, converting it to high-quality natural gas, or generating electricity and heat together. AD plants are characterized by their technical simplicity and minimal energy and space requirements. The classification of anaerobic treatment systems is based on two categories: “high-speed” systems, which involve the retention of biomass, and “low-speed” systems, which do not involve the retention of biomass. High-speed systems have a relatively short hydraulic retention time and a long mass retention period, making them suitable for the treatment of many types of wastewater. Low-speed systems have traditionally been used for the degradation of slurries and solid wastes. This difference in retention times affects the types of waste each system is best suited for. AD reduces the amount of waste and generates valuable products, such as biogas. These systems were characterized by an extended hydraulic retention period, equivalent to the mass retention period. The biogas production process was subject to fluctuations depending on factors such as the nature and concentration of the raw materials as well as the prevailing process conditions. Biogas yields for the organic fraction of municipal solid waste and animal manure ranged from 80 to 200 m3/t and from 2 to 45 m3/m3, respectively. The co-digestion practice played an important role in enhancing the efficiency of the reactors and ensuring their economic viability. Improving the sale of all derivative products enhanced the economic efficiency of anaerobic treatment. Moreover, the implementation of financial incentives to promote renewable energy production significantly enhanced the competitiveness of anaerobic digestion compared to anaerobic composting, providing an optimistic outlook for the future of this technology.
- Open Access
- 1 September 2024
- Published by Walter de Gruyter GmbH in Polish Journal of Chemical Technology
- Vol. 26 (3) , 39-50
A Comprehensive Analysis of the Hydrogen Generation Technology Through Electrochemical Water and Industrial Wastewater Electrolysis
Most renewable energy sources are intermittent and seasonal, making energy storage and consumption problematic. Hydrogen gas can save and convey chemical energy, making it a promising sustainable energy source. Electrochemical water electrolysis technology’s sustainable and efficient hydrogen gas production attracts global attention. Higher hydrogen production rates enhance hydrogen volumetric energy capacity by storing intermittent hydrogen gas in high-pressure tanks. Pressurized storage tanks are cost-effective and efficient. Hydrogen gas may be stored economically and efficiently in pressurized tanks, making electrochemical water electrolysis a sustainable energy source. This paper introduced hydrogen as an alternative to natural gas, detailed water electrolysis technologies for hydrogen production, and highlighted how they can manufacture hydrogen efficiently and cost-effectively. The theoretical volume of gaseous hydrogen and oxygen that could be produced by electrolyzing water under typical temperature and pressure (STP) circumstances, assuming a 100% efficiency rate of the process. Since there are always two moles of hydrogen produced by electrolysis and one mole of gas occupies the same volume, the volume of hydrogen developed from water is twice that of oxygen. The volume of liberated oxygen is 0.21 (L/min), and the volume of liberated hydrogen is 0.42 (L/min) with a current density of 30 A, for instance, the tracer’s diffusion coefficient for all conceivable flow rates. A maximum value of 90 liters per hour was determined to be the threshold at which the diffusion coefficient increased with increasing flow rate. It would appear that the diffusion coefficient remains unchanged at flow rates greater than 90 liters per hour.
- 1 September 2024
- Published by Walter de Gruyter GmbH in Polish Journal of Chemical Technology
- Vol. 26 (3) , 39-50
Open AccessA Comprehensive Analysis of the Hydrogen Generation Technology Through Electrochemical Water and Industrial Wastewater Electrolysis
Most renewable energy sources are intermittent and seasonal, making energy storage and consumption problematic. Hydrogen gas can save and convey chemical energy, making it a promising sustainable energy source. Electrochemical water electrolysis technology’s sustainable and efficient hydrogen gas production attracts global attention. Higher hydrogen production rates enhance hydrogen volumetric energy capacity by storing intermittent hydrogen gas in high-pressure tanks. Pressurized storage tanks are cost-effective and efficient. Hydrogen gas may be stored economically and efficiently in pressurized tanks, making electrochemical water electrolysis a sustainable energy source. This paper introduced hydrogen as an alternative to natural gas, detailed water electrolysis technologies for hydrogen production, and highlighted how they can manufacture hydrogen efficiently and cost-effectively. The theoretical volume of gaseous hydrogen and oxygen that could be produced by electrolyzing water under typical temperature and pressure (STP) circumstances, assuming a 100% efficiency rate of the process. Since there are always two moles of hydrogen produced by electrolysis and one mole of gas occupies the same volume, the volume of hydrogen developed from water is twice that of oxygen. The volume of liberated oxygen is 0.21 (L/min), and the volume of liberated hydrogen is 0.42 (L/min) with a current density of 30 A, for instance, the tracer’s diffusion coefficient for all conceivable flow rates. A maximum value of 90 liters per hour was determined to be the threshold at which the diffusion coefficient increased with increasing flow rate. It would appear that the diffusion coefficient remains unchanged at flow rates greater than 90 liters per hour.