Khairul Islam
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Khairul Islam has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- M. Mahbubul Bashar
Department of Textile Engineering, Mawlana Bhashani Science and Technology University, Tangail, Bangladesh
2 shared publications - Tarikul Islam
Department of Textiles, Merchandising, and Interiors, University of Georgia, Athens, Georgia 30602, USA
2 shared publications - Azharul Islam
Indian Institute of Technology Delhi
1 shared publication - Dulal Hosen
Department of Textile Engineering, Mawlana Bhashani Science and Technology University, Tangail-1902, Bangladesh
1 shared publication - Gajanan Bhat
Department of Textiles, Merchandising and Interiors, University of Georgia, Athens, GA, USA
1 shared publication - Imranul Islam
Department of Textile Development and Marketing, Fashion Institute of Technology, State University of New York, New York, USA
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
Jute fiber-derived functional cellulose nanocrystals for efficient methylene blue dye adsorption
Ammonium persulfate oxidized jute-based functional cellulose nanocrystals, which exhibited high crystallinity and greater thermal stability, enabling high methylene blue dye adsorption, indicating suitability for wastewater treatment.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
Open AccessJute fiber-derived functional cellulose nanocrystals for efficient methylene blue dye adsorption
Ammonium persulfate oxidized jute-based functional cellulose nanocrystals, which exhibited high crystallinity and greater thermal stability, enabling high methylene blue dye adsorption, indicating suitability for wastewater treatment.
- Open Access
- 1 January 2024
- Published by Wiley in Advances in Polymer Technology
- Vol. 2024 (1)
Bio‐Based Packaging Materials from Post‐Consumer Cotton Textiles
This study aims to convert cotton‐based post‐consumer textile waste to biodegradable paper, which not only addresses the discarding of waste but also provides a second use of cotton. The post‐consumer garment made with cotton was decolorized by stripping with concentrated NaOH and hydrose. Afterwards, it was chopped, ground, and treated with NaOH solutions. The paper was prepared through a wet‐laid process by mixing carboxymethyl cellulose as a binder with chopped cotton textiles. To reduce water absorbency, the uncoated paper was coated with thermoplastic polyurethane (TPU) using heat pressing technique. The surface morphology and chemical structure of uncoated pristine paper, coated paper, and TPU films were conducted using SEM and FTIR studies. The tensile strength, contact angle, air permeability, and biodegradability tests were investigated according to the standard methods. The tensile properties of the papers were increased after TPU coating, accounting well around 28% compared to the uncoated pristine paper. The elongation at the break of the coated paper was at least 40% greater than the uncoated pristine paper. The coated paper displayed a higher water contact angle of 100°, even after 10 min. The lower air permeability was observed in the coated paper due to TPU film blocking the free spaces of the paper. The TPU‐coated paper exhibited a weight loss of 48.1%–59.8% after 90 days, whereas the uncoated paper was 100% decomposed after 60 days. The burning of post‐consumer cotton textile waste (PCCTW) paper generated ashes resembling those of burning paper, implying clean and environmental friendly biodegradation. The papers can replace the petroleum–plastic materials and serve as food and other packaging applications.
- 1 January 2024
- Published by Wiley in Advances in Polymer Technology
- Vol. 2024 (1)
Open AccessBio‐Based Packaging Materials from Post‐Consumer Cotton Textiles
This study aims to convert cotton‐based post‐consumer textile waste to biodegradable paper, which not only addresses the discarding of waste but also provides a second use of cotton. The post‐consumer garment made with cotton was decolorized by stripping with concentrated NaOH and hydrose. Afterwards, it was chopped, ground, and treated with NaOH solutions. The paper was prepared through a wet‐laid process by mixing carboxymethyl cellulose as a binder with chopped cotton textiles. To reduce water absorbency, the uncoated paper was coated with thermoplastic polyurethane (TPU) using heat pressing technique. The surface morphology and chemical structure of uncoated pristine paper, coated paper, and TPU films were conducted using SEM and FTIR studies. The tensile strength, contact angle, air permeability, and biodegradability tests were investigated according to the standard methods. The tensile properties of the papers were increased after TPU coating, accounting well around 28% compared to the uncoated pristine paper. The elongation at the break of the coated paper was at least 40% greater than the uncoated pristine paper. The coated paper displayed a higher water contact angle of 100°, even after 10 min. The lower air permeability was observed in the coated paper due to TPU film blocking the free spaces of the paper. The TPU‐coated paper exhibited a weight loss of 48.1%–59.8% after 90 days, whereas the uncoated paper was 100% decomposed after 60 days. The burning of post‐consumer cotton textile waste (PCCTW) paper generated ashes resembling those of burning paper, implying clean and environmental friendly biodegradation. The papers can replace the petroleum–plastic materials and serve as food and other packaging applications.