Qi Zhan

Rotor operation near a free water surface induces strong gas–liquid coupling, leading to the interfacial instability, surface breakup, and significant thrust degradation. Owing to a scarcity of studies on the triggering mechanism, the transition of the interface from the quasi-steady deformation to the periodic wave motion and catastrophic breakup has not yet been quantitatively identified. As a result, most existing physical models treat the free surface as a rigid boundary, and decrease the error by modifying the effective rotor–surface clearance, which confines their predictive range to a weak ground-effect framework. In this work, an experiment-informed theoretical framework is developed by coupling a Kelvin–Helmholtz instability criterion with a Weber-number-based breakup classification to identify the transition boundary of flow regimes and quantify the rotor thrust loss relative to the ground effect. The validation with thrust measurements of two- and three-bladed rotors shows average prediction errors below 3%, demonstrating high accuracy and computational efficiency of the model.

Cross-media vehicles, which combine the advantages of airplanes and submarines, are capable of performing complex tasks in different media and have attracted significant interest in recent years. In practice, however, cross-media rotorcrafts face numerous challenges during the cross-media transition, one of which is the complex mixed air–water flows induced by their rotors operating in close proximity to the water surface. These flows can result in aerodynamic penalties and structural damage to the rotors. The interactions between a water surface and a rotor wake bring about potential risks of cross-media locomotion, which is known as the near-water effect of rotors. Given that the distinctions between the near-water effect and the ground effect of rotors are not yet widely understood, this study details the discovery of the near-water effect and provides a comprehensive review of the evolutionary development of the near-water effect, tracing its understanding from the ground effect to the influence of droplets through aerodynamic modeling, numerical simulations, and near-water experimental studies. Furthermore, open problems and challenges associated with the near-water effect are discussed, including flow field measurements and numerical simulation approaches. Additionally, potential applications of the near-water effect for the development of cross-media rotorcraft are also described, which are valuable for aerodynamic design and cross-media control.

Rotor-type cross-media vehicles always induce considerably complex mixed air–water flows when approaching the water surface, resulting in relative thrust loss and structural damage on rotor. The interactions between a water surface and rotor wake bring potential risks to the cross-media process, which is known as the near-water effect of the rotor. In this paper, experimental investigations are used to explore the fluid dynamics of the near-water effect of the rotor. Qualitative droplet observation was carried out on the 0.25 m and 0.56 m diameter commercial rotor blades and the 0.07 m diameter ducted fan near the water surface first to gain a qualitative understanding of droplet characteristics. The results show that the rotor wake caused water surface deformation, droplet tearing off, splashing, and entrainment into the rotor disk. The depression formed by the rotor downwash flow impacting the water surface is named as three modes: dimpling, splashing, and penetrating, and the correlation between the depression modes and the aerodynamic characteristics of the rotor is primary analyzed. The flow mechanisms of dimpling mode were studied using the particle image velocimetry (PIV) technique. The results showed that the cavity and liquid crown obviously alter the flow direction of water surface jets, but not all rotors near water enter the vortex ring state. Two splashing mechanisms were revealed, including the direct ejection of droplets at the rim of depression and the tearing of liquid crown by the water surface jets. The blade tip vortex in the surface jet is a potential cause of entrainment into the rotor disk and secondary breakup of the droplet.