Yucheng Zou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yucheng Zou has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Jiajun Zheng
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, China
5 shared publications Fuzhen Pang
4 shared publications- Haichao Li
College of Shipbuilding Engineering, Harbin Engineering University, Harbin 150001, China
4 shared publications Yuan Du
4 shared publications- Yuan Du
School of Marine Engineering and Technology, Sun Yat-Sen University, Zhuhai 519000, China
4 shared publications - Fuzhen Pang
Harbin Engineering University
2 shared publications
Latest Publications
- Open Access
- 24 September 2026
- Published by Elsevier in SSRN Electronic Journal
A coupled Ritz–ESM method for vibro-acoustic analysis of conical–cylindrical–spherical shells
A unified Ritz–Equivalent Source Method (Ritz–ESM) is developed for the vibro-acoustic analysis of conical–cylindrical–spherical shells under different fluid loadings. The admissible displacement functions are constructed using Jacobi orthogonal polynomials and Fourier series, and the vibration responses under light and heavy fluid loading are obtained through the Ritz variational procedure. The surface normal velocity serves as the acoustic boundary condition. A segmented conformal equivalent source surface is constructed inside the shell, and the source strengths are recovered using the Green’s function and Tikhonov regularization to predict sound pressure, radiated sound power, and acoustic directivity. The proposed method is validated against results in the literature and FEM-BEM solutions, and the effects of truncation parameters, Jacobi parameters, source-surface geometry, and scaling factor are systematically investigated. Heavy-fluid loading shifts the natural frequencies and resonance peaks towards lower frequencies, confirming that the formulation captures the fluid added-mass effect. The reconstructed mean-square velocity and the predicted acoustic responses agree well with the structural and FEM–BEM results. The conformal source surface outperforms the axial-line and other non-conformal configurations in accuracy, numerical stability, and modeling convenience. The proposed method provides a theoretical and computational framework for predicting acoustic radiation from assembled shells of revolution and supporting parametric design.
- 24 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA coupled Ritz–ESM method for vibro-acoustic analysis of conical–cylindrical–spherical shells
A unified Ritz–Equivalent Source Method (Ritz–ESM) is developed for the vibro-acoustic analysis of conical–cylindrical–spherical shells under different fluid loadings. The admissible displacement functions are constructed using Jacobi orthogonal polynomials and Fourier series, and the vibration responses under light and heavy fluid loading are obtained through the Ritz variational procedure. The surface normal velocity serves as the acoustic boundary condition. A segmented conformal equivalent source surface is constructed inside the shell, and the source strengths are recovered using the Green’s function and Tikhonov regularization to predict sound pressure, radiated sound power, and acoustic directivity. The proposed method is validated against results in the literature and FEM-BEM solutions, and the effects of truncation parameters, Jacobi parameters, source-surface geometry, and scaling factor are systematically investigated. Heavy-fluid loading shifts the natural frequencies and resonance peaks towards lower frequencies, confirming that the formulation captures the fluid added-mass effect. The reconstructed mean-square velocity and the predicted acoustic responses agree well with the structural and FEM–BEM results. The conformal source surface outperforms the axial-line and other non-conformal configurations in accuracy, numerical stability, and modeling convenience. The proposed method provides a theoretical and computational framework for predicting acoustic radiation from assembled shells of revolution and supporting parametric design.
- Open Access
- 11 September 2026
- Published by Elsevier in SSRN Electronic Journal
A coupled Ritz–ESM method for vibro-acoustic analysis of conical–cylindrical–spherical shells
A unified Ritz–Equivalent Source Method (Ritz–ESM) is developed for the vibro-acoustic analysis of conical–cylindrical–spherical shells under different fluid loadings. The method couples the structural energy formulation of the assembled shell with the equivalent source formulation of the radiated acoustic field. The admissible displacement functions are constructed using Jacobi orthogonal polynomials and Fourier series, and the free and forced vibration responses under light and heavy fluid loading are obtained through the Ritz variational procedure. The surface normal velocity serves as the acoustic boundary condition. A segmented conformal equivalent source surface is constructed inside the shell, and the source strengths are recovered using the Green’s function and Tikhonov regularization to predict sound pressure, radiated sound power, and acoustic directivity. The proposed method is validated against results in the literature and FEM-BEM solutions, and the effects of truncation parameters, Jacobi parameters, source-surface geometry, and scaling factor are systematically investigated. Heavy-fluid loading shifts the natural frequencies and resonance peaks towards lower frequencies, confirming that the formulation captures the fluid added-mass effect. The reconstructed mean-square velocity and the predicted acoustic responses agree well with the structural and FEM–BEM results. The conformal source surface outperforms the axial-line and other non-conformal configurations in accuracy, numerical stability, and modeling convenience. The proposed method provides a theoretical and computational framework for predicting acoustic radiation from assembled shells of revolution and supporting parametric design.
- 11 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA coupled Ritz–ESM method for vibro-acoustic analysis of conical–cylindrical–spherical shells
A unified Ritz–Equivalent Source Method (Ritz–ESM) is developed for the vibro-acoustic analysis of conical–cylindrical–spherical shells under different fluid loadings. The method couples the structural energy formulation of the assembled shell with the equivalent source formulation of the radiated acoustic field. The admissible displacement functions are constructed using Jacobi orthogonal polynomials and Fourier series, and the free and forced vibration responses under light and heavy fluid loading are obtained through the Ritz variational procedure. The surface normal velocity serves as the acoustic boundary condition. A segmented conformal equivalent source surface is constructed inside the shell, and the source strengths are recovered using the Green’s function and Tikhonov regularization to predict sound pressure, radiated sound power, and acoustic directivity. The proposed method is validated against results in the literature and FEM-BEM solutions, and the effects of truncation parameters, Jacobi parameters, source-surface geometry, and scaling factor are systematically investigated. Heavy-fluid loading shifts the natural frequencies and resonance peaks towards lower frequencies, confirming that the formulation captures the fluid added-mass effect. The reconstructed mean-square velocity and the predicted acoustic responses agree well with the structural and FEM–BEM results. The conformal source surface outperforms the axial-line and other non-conformal configurations in accuracy, numerical stability, and modeling convenience. The proposed method provides a theoretical and computational framework for predicting acoustic radiation from assembled shells of revolution and supporting parametric design.
- Open Access
- 29 July 2026
- Published by Elsevier in SSRN Electronic Journal
Reconstruction of Cylindrical Shells Using a Wavenumber-Domain Physics-Informed Neural Network with Limited Measurements
Structural health monitoring of underwater vehicles is of critical importance for ensuring their safe operation. As a key structural component, the cylindrical shell compartment plays a decisive role in the overall performance and reliability of the vehicle, with its vibration characteristics being of particular concern. However, when dealing with complex high-frequency spatial vibration fields, the finite element method (FEM) suffers from high computational cost, while conventional physics-informed neural networks (PINNs) are prone to spectral bias and gradient pathologies induced by fourth-order partial differential equations (PDEs). To address these challenges, this study proposes a feature-enhanced broadband continuous wavenumber-domain physics-informed neural network (K-PINN) for high-fidelity reconstruction of cylindrical shell vibration fields from sparse measurement data. First, a reduced-order spatial–wavenumber domain mapping model tailored for network optimization is established. By introducing second-order auxiliary physical variables, the high-order automatic differentiation barrier in deep networks is effectively eliminated. Second, a multi-scale Fourier feature embedding is innovatively integrated into the network architecture to mitigate spectral bias in broadband approximation. Numerical results demonstrate that the training time per iteration of the proposed K-PINN is reduced by two orders of magnitude compared with the standard PINN, while maintaining remarkable robustness under 20 dB Gaussian white noise and extremely sparse random sampling. Furthermore, experiments conducted on a large-scale underwater steel cylindrical shell validate the engineering applicability of the proposed framework. The overall acceleration level (OAL) reconstruction error at measurement points is strictly controlled within 0.3–0.9 dB, with typical peak errors below 3 dB.
- 29 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessReconstruction of Cylindrical Shells Using a Wavenumber-Domain Physics-Informed Neural Network with Limited Measurements
Structural health monitoring of underwater vehicles is of critical importance for ensuring their safe operation. As a key structural component, the cylindrical shell compartment plays a decisive role in the overall performance and reliability of the vehicle, with its vibration characteristics being of particular concern. However, when dealing with complex high-frequency spatial vibration fields, the finite element method (FEM) suffers from high computational cost, while conventional physics-informed neural networks (PINNs) are prone to spectral bias and gradient pathologies induced by fourth-order partial differential equations (PDEs). To address these challenges, this study proposes a feature-enhanced broadband continuous wavenumber-domain physics-informed neural network (K-PINN) for high-fidelity reconstruction of cylindrical shell vibration fields from sparse measurement data. First, a reduced-order spatial–wavenumber domain mapping model tailored for network optimization is established. By introducing second-order auxiliary physical variables, the high-order automatic differentiation barrier in deep networks is effectively eliminated. Second, a multi-scale Fourier feature embedding is innovatively integrated into the network architecture to mitigate spectral bias in broadband approximation. Numerical results demonstrate that the training time per iteration of the proposed K-PINN is reduced by two orders of magnitude compared with the standard PINN, while maintaining remarkable robustness under 20 dB Gaussian white noise and extremely sparse random sampling. Furthermore, experiments conducted on a large-scale underwater steel cylindrical shell validate the engineering applicability of the proposed framework. The overall acceleration level (OAL) reconstruction error at measurement points is strictly controlled within 0.3–0.9 dB, with typical peak errors below 3 dB.
- Open Access
- 9 July 2026
- Published by Elsevier in SSRN Electronic Journal
Reconstruction of Cylindrical Shell Vibration Responses Using a Wavenumber-Domain Physics-Informed Neural Network with Limited Measurements
Structural health monitoring of underwater vehicles requires accurate reconstruction of vibration responses from limited measurement data. Cylindrical shell compartments are key load-bearing components of underwater vehicles, and their broadband vibration fields often exhibit strong spatial oscillations under complex excitation. However, repeated finite element analysis is computationally expensive for broadband response evaluation, while conventional physics-informed neural networks (PINNs) may suffer from spectral bias and optimization difficulties when high-order shell governing equations are directly enforced. To address these issues, this study proposes a feature-enhanced continuous wavenumber-domain physics-informed neural network (K-PINN) for reconstructing cylindrical shell vibration responses from sparse measurements. A spatial–wavenumber mapping is established to represent the vibration field through complex k-space coefficients, and second-order auxiliary variables are introduced to avoid direct fourth-order automatic differentiation. Multi-scale Fourier features are further embedded into the network input to improve broadband representation capability. In addition, a normalized multi-component loss function, including data, governing-equation, auxiliary, boundary-condition, and sparsity constraints, is formulated to ensure stable training. Numerical results show that the proposed K-PINN reduces the per-iteration training time from 56s to 0.8s compared with a standard PINN, while maintaining accurate reconstruction under sparse sampling and 20 dB Gaussian noise. Wavenumber-domain (k-space) energy analysis further demonstrates that only 2.30% of the wavenumber coefficients are required to capture 95% of the total vibration energy at 500 Hz, supporting the physical rationality of the sparsity-promoting constraint. Underwater experiments on a large-scale steel cylindrical shell validate the engineering applicability of the proposed framework, with overall acceleration level errors within 0.3–0.9 dB and typical resonance peak errors below 3 dB.
- 9 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessReconstruction of Cylindrical Shell Vibration Responses Using a Wavenumber-Domain Physics-Informed Neural Network with Limited Measurements
Structural health monitoring of underwater vehicles requires accurate reconstruction of vibration responses from limited measurement data. Cylindrical shell compartments are key load-bearing components of underwater vehicles, and their broadband vibration fields often exhibit strong spatial oscillations under complex excitation. However, repeated finite element analysis is computationally expensive for broadband response evaluation, while conventional physics-informed neural networks (PINNs) may suffer from spectral bias and optimization difficulties when high-order shell governing equations are directly enforced. To address these issues, this study proposes a feature-enhanced continuous wavenumber-domain physics-informed neural network (K-PINN) for reconstructing cylindrical shell vibration responses from sparse measurements. A spatial–wavenumber mapping is established to represent the vibration field through complex k-space coefficients, and second-order auxiliary variables are introduced to avoid direct fourth-order automatic differentiation. Multi-scale Fourier features are further embedded into the network input to improve broadband representation capability. In addition, a normalized multi-component loss function, including data, governing-equation, auxiliary, boundary-condition, and sparsity constraints, is formulated to ensure stable training. Numerical results show that the proposed K-PINN reduces the per-iteration training time from 56s to 0.8s compared with a standard PINN, while maintaining accurate reconstruction under sparse sampling and 20 dB Gaussian noise. Wavenumber-domain (k-space) energy analysis further demonstrates that only 2.30% of the wavenumber coefficients are required to capture 95% of the total vibration energy at 500 Hz, supporting the physical rationality of the sparsity-promoting constraint. Underwater experiments on a large-scale steel cylindrical shell validate the engineering applicability of the proposed framework, with overall acceleration level errors within 0.3–0.9 dB and typical resonance peak errors below 3 dB.
- Open Access
- 21 February 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (3) , 401
A Novel Approach to the Design of Distributed Dynamic Vibration Absorbers for Plates Subjected to Classical and Elastic Edge Conditions
Plate structures are the main components of offshore platforms and ships in engineering applications. The vibration control of the low-frequency mode of plate structures has always been a meaningful research object in marine science and engineering. Due to their low cost and good performance, dynamic vibration absorbers are widely used. To enhance the design efficiency of dynamic vibration absorbers, a mathematical model was developed for plates with dynamic vibration absorbers under different boundary constraints. To overcome the discontinuity of the displacement function, auxiliary series were introduced. In addition, the efficiency of resolving the plate structure’s equivalent mass was significantly improved compared with when using FEM software Abaqus 6.14. The validity of the proposed mathematical model was confirmed in comparison with related studies, the FEM results, and the experimental results. Considering the mathematical model and design approach proposed in the current paper, more research on the vibration control of plates subjected to clamped and elastic boundary conditions should be performed. The mathematical model and findings in the design process may have positive implications for the control of the vibration of plate structures in marine science and engineering.
- 21 February 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (3) , 401
Open AccessA Novel Approach to the Design of Distributed Dynamic Vibration Absorbers for Plates Subjected to Classical and Elastic Edge Conditions
Plate structures are the main components of offshore platforms and ships in engineering applications. The vibration control of the low-frequency mode of plate structures has always been a meaningful research object in marine science and engineering. Due to their low cost and good performance, dynamic vibration absorbers are widely used. To enhance the design efficiency of dynamic vibration absorbers, a mathematical model was developed for plates with dynamic vibration absorbers under different boundary constraints. To overcome the discontinuity of the displacement function, auxiliary series were introduced. In addition, the efficiency of resolving the plate structure’s equivalent mass was significantly improved compared with when using FEM software Abaqus 6.14. The validity of the proposed mathematical model was confirmed in comparison with related studies, the FEM results, and the experimental results. Considering the mathematical model and design approach proposed in the current paper, more research on the vibration control of plates subjected to clamped and elastic boundary conditions should be performed. The mathematical model and findings in the design process may have positive implications for the control of the vibration of plate structures in marine science and engineering.
- Open Access
- 3 February 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (2) , 283
A Semi-Analytical Method to Design a Dynamic Vibration Absorber for Coupled Plate Structures of Offshore Platforms
Coupled plate structures composed of stiffened plates and sub-plates have been widely used in marine engineering practice. Meanwhile, the low-frequency multi-linear spectrum vibration control of the coupled stiffened plate structures has become necessary and meaningful. However, the design efficiency of the dynamic vibration absorber of the corresponding structure is still low. In the present study, a mathematical model of coupled plate structures and a dynamic vibration absorber is introduced to improve design efficiency. Subsequently, an experiment is designed to verify the effectiveness and advantages of the current method. The reliability of the current mathematical model is verified by comparing it with modal experiment results. Moreover, the equivalent mass solution efficiency is greatly improved by comparing it with FEM. Finally, a comparison experiment of the dynamic vibration absorber has also been conducted to further verify the effectiveness of the current method. The semi-analytical method proposed in the current research may be useful when designing dynamic vibration absorbers for the coupled plate structures of offshore platforms.
- 3 February 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (2) , 283
Open AccessA Semi-Analytical Method to Design a Dynamic Vibration Absorber for Coupled Plate Structures of Offshore Platforms
Coupled plate structures composed of stiffened plates and sub-plates have been widely used in marine engineering practice. Meanwhile, the low-frequency multi-linear spectrum vibration control of the coupled stiffened plate structures has become necessary and meaningful. However, the design efficiency of the dynamic vibration absorber of the corresponding structure is still low. In the present study, a mathematical model of coupled plate structures and a dynamic vibration absorber is introduced to improve design efficiency. Subsequently, an experiment is designed to verify the effectiveness and advantages of the current method. The reliability of the current mathematical model is verified by comparing it with modal experiment results. Moreover, the equivalent mass solution efficiency is greatly improved by comparing it with FEM. Finally, a comparison experiment of the dynamic vibration absorber has also been conducted to further verify the effectiveness of the current method. The semi-analytical method proposed in the current research may be useful when designing dynamic vibration absorbers for the coupled plate structures of offshore platforms.
- Open Access
- 9 September 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (9) , 1597
Experimental and Simulation Study on Flow-Induced Vibration of Underwater Vehicle
At high speeds, flow-induced vibration noise is the main component of underwater vehicle noise. The turbulent fluctuating pressure is the main excitation source of this noise. It can cause vibration of the underwater vehicle’s shell and eventually radiate noise outward. Therefore, by reducing the turbulent pressure fluctuation or controlling the vibration of the underwater vehicle’s shell, the radiation noise of the underwater vehicle can be effectively reduced. This study designs a cone–column–sphere composite structure. Firstly, the effect of fluid–structure coupling on pulsating pressure is studied. Next, a machine learning method is used to predict the turbulent pressure fluctuations and the fluid-induced vibration response of the structure at different speeds. The results were compared with experimental and numerical simulation results. The results show that the deformation of the structure will affect the flow field distribution and pulsating pressure of the cylindrical section. The machine learning method based on the BP (back propagation) neural network model can quickly predict the pulsating pressure and vibration response of the cone–cylinder–sphere composite structure under different Reynolds numbers. Compared with the experimental results, the error of the machine learning prediction results is less than 7%. The research method proposed in this paper provides a new solution for the rapid prediction and control of hydrodynamic vibration noise of underwater vehicles.
- 9 September 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (9) , 1597
Open AccessExperimental and Simulation Study on Flow-Induced Vibration of Underwater Vehicle
At high speeds, flow-induced vibration noise is the main component of underwater vehicle noise. The turbulent fluctuating pressure is the main excitation source of this noise. It can cause vibration of the underwater vehicle’s shell and eventually radiate noise outward. Therefore, by reducing the turbulent pressure fluctuation or controlling the vibration of the underwater vehicle’s shell, the radiation noise of the underwater vehicle can be effectively reduced. This study designs a cone–column–sphere composite structure. Firstly, the effect of fluid–structure coupling on pulsating pressure is studied. Next, a machine learning method is used to predict the turbulent pressure fluctuations and the fluid-induced vibration response of the structure at different speeds. The results were compared with experimental and numerical simulation results. The results show that the deformation of the structure will affect the flow field distribution and pulsating pressure of the cylindrical section. The machine learning method based on the BP (back propagation) neural network model can quickly predict the pulsating pressure and vibration response of the cone–cylinder–sphere composite structure under different Reynolds numbers. Compared with the experimental results, the error of the machine learning prediction results is less than 7%. The research method proposed in this paper provides a new solution for the rapid prediction and control of hydrodynamic vibration noise of underwater vehicles.
- 18 November 2023
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 24 (16)
A Semi-Analytical Method to Design Distributed Dynamic Vibration Absorber of Beam Under General Elastic Edge Constraints
In engineering practice, dynamic vibration absorber is an effective method to control vibration of beam structure. The mathematical model of beam coupled with spring–mass systems under elastic edge constraints is established in this paper. In addition to Fourier cosine series, supplementary sine functions are introduced to represent the displacement function of the beam. The spring–mass system is considered by increasing degrees of freedom when constructing the mass matrix and stiffness matrix. The efficiency of solving equivalent mass is greatly improved in the comparison with FEM, which is important when designing dynamic vibration absorber. Subsequently, we conduct parametric analysis of the control effect about the dynamic vibration absorber based on the current mathematical model. The procedure of designing distributed dynamic vibration absorber of beam structure under various boundary condition is also presented. To verify the validity of the current mathematical model and design procedure, a cantilever beam experiment was conducted. The findings presented in the current research may be useful for researchers in the process of multi-line spectrum vibration control of beam structure.
- 18 November 2023
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 24 (16)
A Semi-Analytical Method to Design Distributed Dynamic Vibration Absorber of Beam Under General Elastic Edge Constraints
In engineering practice, dynamic vibration absorber is an effective method to control vibration of beam structure. The mathematical model of beam coupled with spring–mass systems under elastic edge constraints is established in this paper. In addition to Fourier cosine series, supplementary sine functions are introduced to represent the displacement function of the beam. The spring–mass system is considered by increasing degrees of freedom when constructing the mass matrix and stiffness matrix. The efficiency of solving equivalent mass is greatly improved in the comparison with FEM, which is important when designing dynamic vibration absorber. Subsequently, we conduct parametric analysis of the control effect about the dynamic vibration absorber based on the current mathematical model. The procedure of designing distributed dynamic vibration absorber of beam structure under various boundary condition is also presented. To verify the validity of the current mathematical model and design procedure, a cantilever beam experiment was conducted. The findings presented in the current research may be useful for researchers in the process of multi-line spectrum vibration control of beam structure.