Youtian Yang
Youtian Yang has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Jidong Wu
Joint International Research Laboratory of Catastrophe Simulation and Systemic Risk Governance, Beijing Normal University
6 shared publications - Lili Wang
Joint International Research Laboratory of Catastrophe Simulation and Systemic Risk Governance, Beijing Normal University at Zhuhai, Zhuhai 519087, China
3 shared publications - Hua Zhang
School of National Safety and Emergency Management, Beijing Normal University, Beijing, China
2 shared publications - Jiazi Li
Faculty of Geographical Science, Beijing Normal University, Beijing, China
2 shared publications Lili Wang
2 shared publications- Lin Dong
Faculty of Geographical Science, Beijing Normal University, Beijing, China
2 shared publications
Latest Publications
- 6 November 2026
- Published by Elsevier in Renewable Energy
- Vol. 279
Compound clean energy drought risk in China
- 6 November 2026
- Published by Elsevier in Renewable Energy
- Vol. 279
Compound clean energy drought risk in China
- Open Access
- 30 July 2026
- Published by Elsevier in Developments in the Built Environment
- Vol. 27
ViGeo-Fuse: A multimodal framework integrating computer vision and geospatial ML for post-earthquake building damage classification
- 30 July 2026
- Published by Elsevier in Developments in the Built Environment
- Vol. 27
Open AccessViGeo-Fuse: A multimodal framework integrating computer vision and geospatial ML for post-earthquake building damage classification
- Open Access
- 13 March 2026
- Published by Springer Nature in npj Natural Hazards
- Vol. 3 (1) , 32
Assessment of ground-motion prediction equations using observations and information theory: application to the Northeastern Tibetan Plateau
Ground-motion prediction equations (GMPEs) are fundamental to seismic hazard assessment, yet their applicability is difficult to evaluate in tectonically complex regions where instrumental observations are sparse or absent, such as the northeastern Tibetan Plateau. We evaluate representative GMPEs using two approaches: residual-based error metrics and an information-theory-based evaluation. The two recent earthquakes, the 2022 Menyuan and 2023 Jishishan events, provide an opportunity to examine model behavior under observed conditions. The information-theory-based approach is first applied to these two earthquakes to verify feasibility and to compare with residual-based outcomes, and is then extended to two large historical earthquakes in the region, the 1920 Haiyuan earthquake and the 1927 Gulang earthquake, to assess stability under extrapolative, data-limited conditions. Across these applications, the information-theory-based evaluation yields consistent rankings and stable weights, whereas the residual analysis captures event-specific variability. Together, the two approaches provide complementary insight into model applicability and offer a practical basis for ground-motion assessment and extrapolation in tectonically complex and observationally sparse regions.
- 13 March 2026
- Published by Springer Nature in npj Natural Hazards
- Vol. 3 (1) , 32
Open AccessAssessment of ground-motion prediction equations using observations and information theory: application to the Northeastern Tibetan Plateau
Ground-motion prediction equations (GMPEs) are fundamental to seismic hazard assessment, yet their applicability is difficult to evaluate in tectonically complex regions where instrumental observations are sparse or absent, such as the northeastern Tibetan Plateau. We evaluate representative GMPEs using two approaches: residual-based error metrics and an information-theory-based evaluation. The two recent earthquakes, the 2022 Menyuan and 2023 Jishishan events, provide an opportunity to examine model behavior under observed conditions. The information-theory-based approach is first applied to these two earthquakes to verify feasibility and to compare with residual-based outcomes, and is then extended to two large historical earthquakes in the region, the 1920 Haiyuan earthquake and the 1927 Gulang earthquake, to assess stability under extrapolative, data-limited conditions. Across these applications, the information-theory-based evaluation yields consistent rankings and stable weights, whereas the residual analysis captures event-specific variability. Together, the two approaches provide complementary insight into model applicability and offer a practical basis for ground-motion assessment and extrapolation in tectonically complex and observationally sparse regions.
- Open Access
- 14 February 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (4) , 597
Recognition of Building Structural Types Using Multisource Remote Sensing Data and Prior Knowledge
Accurate identification of building structural types (BSTs) is essential for seismic vulnerability assessment and disaster risk management. Traditional field survey methods are constrained by high costs, low efficiency, and limited scalability. Although remote sensing-based approaches offer strong potential for large area applications, they are often hindered by limited spatial resolution, spectral confusion, and difficulties in capturing information related to internal building structures. To address these limitations, this study proposes a BST classification approach that integrates remote sensing image features with multisource prior knowledge. In addition to conventional remote sensing features derived from building shape, spectral, and texture, multiple types of prior information are incorporated to compensate for the insufficient structural discriminative capability of remote sensing imagery alone. These include distance to roads, terrain conditions, building height, population, gross domestic product (GDP), and nighttime light intensity. Considering the limited number of labeled samples and the high dimensionality of features, fourteen mainstream machine learning algorithms are systematically evaluated. Through feature selection and model optimization, XGBoost is identified as the most effective classifier, achieving the highest weighted F1 score of 78.62%. The results demonstrate that, under the same machine learning model settings, models trained solely on remote sensing features consistently underperform those integrating multisource features combined with feature selection, confirming the effectiveness of synergistically fusing remote sensing features with prior knowledge for improving overall BST classification performance. Further analyses demonstrate that different groups of remote sensing features and prior knowledge are associated with reductions in misclassification between specific BSTs. Compared with approaches based exclusively on remote sensing imagery, the proposed method exhibits higher and more balanced classification performance across different BSTs, with particularly notable advantages for structure categories that are difficult to distinguish using single-source remote sensing features. This study provides the foundation for subsequent seismic vulnerability analysis and related risk studies.
- 14 February 2026
- Published by MDPI AG in Remote Sensing
- Vol. 18 (4) , 597
Open AccessRecognition of Building Structural Types Using Multisource Remote Sensing Data and Prior Knowledge
Accurate identification of building structural types (BSTs) is essential for seismic vulnerability assessment and disaster risk management. Traditional field survey methods are constrained by high costs, low efficiency, and limited scalability. Although remote sensing-based approaches offer strong potential for large area applications, they are often hindered by limited spatial resolution, spectral confusion, and difficulties in capturing information related to internal building structures. To address these limitations, this study proposes a BST classification approach that integrates remote sensing image features with multisource prior knowledge. In addition to conventional remote sensing features derived from building shape, spectral, and texture, multiple types of prior information are incorporated to compensate for the insufficient structural discriminative capability of remote sensing imagery alone. These include distance to roads, terrain conditions, building height, population, gross domestic product (GDP), and nighttime light intensity. Considering the limited number of labeled samples and the high dimensionality of features, fourteen mainstream machine learning algorithms are systematically evaluated. Through feature selection and model optimization, XGBoost is identified as the most effective classifier, achieving the highest weighted F1 score of 78.62%. The results demonstrate that, under the same machine learning model settings, models trained solely on remote sensing features consistently underperform those integrating multisource features combined with feature selection, confirming the effectiveness of synergistically fusing remote sensing features with prior knowledge for improving overall BST classification performance. Further analyses demonstrate that different groups of remote sensing features and prior knowledge are associated with reductions in misclassification between specific BSTs. Compared with approaches based exclusively on remote sensing imagery, the proposed method exhibits higher and more balanced classification performance across different BSTs, with particularly notable advantages for structure categories that are difficult to distinguish using single-source remote sensing features. This study provides the foundation for subsequent seismic vulnerability analysis and related risk studies.
- Open Access
- 28 October 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (21) , 4006
Dynamic Earthquake-Induced Landslide Susceptibility Assessment Model: Integrating Machine Learning and Remote Sensing
Earthquake-induced landslides (EQILs) represent a serious secondary disaster of earthquakes, and conducting an effective assessment of earthquake-induced landslide susceptibility (ELSA) post-earthquake is helpful in reducing risk. In light of the diverse demands for ELSA across different time periods following an earthquake and the growing availability of data, this paper proposes using remote sensing data to dynamically update the ELSA model. By studying the Ms 6.2 earthquake in Jishishan County, Gansu Province, China, on 18 December 2023, rapid assessment results were derived from 12 pre-trained ELSA models combined with the spatial distribution of historical earthquake-related landslides immediately after the earthquake for early warning. Throughout the entire emergency response stage, the ELSA model was dynamically updated by integrating the EQILs points interpreted from remote sensing images as new training data to enhance assessment accuracy. After the emergency phase, the remote sensing interpretation results were compiled to create the new EQILs inventory. A high landslide potential area was identified using a re-trained model based on the updated inventory, offering a valuable reference for risk management during the recovery phase. The study highlights the importance of integrating remote sensing into ELSA model updates and recommends utilizing time-dependent remote sensing data for sampling to enhance the effectiveness of ELSA.
- 28 October 2024
- Published by MDPI AG in Remote Sensing
- Vol. 16 (21) , 4006
Open AccessDynamic Earthquake-Induced Landslide Susceptibility Assessment Model: Integrating Machine Learning and Remote Sensing
Earthquake-induced landslides (EQILs) represent a serious secondary disaster of earthquakes, and conducting an effective assessment of earthquake-induced landslide susceptibility (ELSA) post-earthquake is helpful in reducing risk. In light of the diverse demands for ELSA across different time periods following an earthquake and the growing availability of data, this paper proposes using remote sensing data to dynamically update the ELSA model. By studying the Ms 6.2 earthquake in Jishishan County, Gansu Province, China, on 18 December 2023, rapid assessment results were derived from 12 pre-trained ELSA models combined with the spatial distribution of historical earthquake-related landslides immediately after the earthquake for early warning. Throughout the entire emergency response stage, the ELSA model was dynamically updated by integrating the EQILs points interpreted from remote sensing images as new training data to enhance assessment accuracy. After the emergency phase, the remote sensing interpretation results were compiled to create the new EQILs inventory. A high landslide potential area was identified using a re-trained model based on the updated inventory, offering a valuable reference for risk management during the recovery phase. The study highlights the importance of integrating remote sensing into ELSA model updates and recommends utilizing time-dependent remote sensing data for sampling to enhance the effectiveness of ELSA.
- Open Access
- 23 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 15301-15318
Deep Learning Models for Hazard-Damaged Building Detection Using Remote Sensing Datasets: A Comprehensive Review
Building collapse is a leading cause of casualties and economic losses during disasters. Accurate and timely assessment of building damage is critical for effective emergency response and recovery efforts. This paper provides a comprehensive review of 242 papers, summarizing the progress and challenges in using deep learning models with remote sensing images for building damage detection. The study specifically examines datasets, deep learning models, and applications. The paper highlights the scarcity of publicly available training datasets for hazard-damaged building detection, with only 13 datasets identified. This scarcity significantly limits the data accessible for deep learning training. Building damage detection models can be classified into single-temporal and bi-temporal methods. The majority of studies focus on single-temporal methods, which utilize post-event images and employ Convolutional Neural Network (CNN) algorithms. These methods have shown promising results in comprehensive performance evaluation. Building damage detection systems typically involve two levels (damaged or undamaged) or four levels (degree of damage) classification. The performance accuracy of these systems varies widely, ranging from 52.2% to 95.82% for two-level classification and 14% to 86.5% for four-level classification. The differences in accuracy can be attributed to both the detection methods and the classification systems used, illustrating the complexity of building damage detection. Based on the current research, challenges in building damage detection include the insufficiency of datasets and limited accuracy in classifying the four damage categories. Future studies could focus on improving detection accuracy by considering different damage categories and exploring the fusion of multi-source data.
- 23 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
- Vol. 17 (19391404) , 15301-15318
Open AccessDeep Learning Models for Hazard-Damaged Building Detection Using Remote Sensing Datasets: A Comprehensive Review
Building collapse is a leading cause of casualties and economic losses during disasters. Accurate and timely assessment of building damage is critical for effective emergency response and recovery efforts. This paper provides a comprehensive review of 242 papers, summarizing the progress and challenges in using deep learning models with remote sensing images for building damage detection. The study specifically examines datasets, deep learning models, and applications. The paper highlights the scarcity of publicly available training datasets for hazard-damaged building detection, with only 13 datasets identified. This scarcity significantly limits the data accessible for deep learning training. Building damage detection models can be classified into single-temporal and bi-temporal methods. The majority of studies focus on single-temporal methods, which utilize post-event images and employ Convolutional Neural Network (CNN) algorithms. These methods have shown promising results in comprehensive performance evaluation. Building damage detection systems typically involve two levels (damaged or undamaged) or four levels (degree of damage) classification. The performance accuracy of these systems varies widely, ranging from 52.2% to 95.82% for two-level classification and 14% to 86.5% for four-level classification. The differences in accuracy can be attributed to both the detection methods and the classification systems used, illustrating the complexity of building damage detection. Based on the current research, challenges in building damage detection include the insufficiency of datasets and limited accuracy in classifying the four damage categories. Future studies could focus on improving detection accuracy by considering different damage categories and exploring the fusion of multi-source data.
- Open Access
- 8 July 2024
- Published by Taylor & Francis in Geomatics, Natural Hazards and Risk
- Vol. 15 (1)
Multi-hazard direct economic loss risk assessment on the Tibet Plateau
- 8 July 2024
- Published by Taylor & Francis in Geomatics, Natural Hazards and Risk
- Vol. 15 (1)
Open AccessMulti-hazard direct economic loss risk assessment on the Tibet Plateau
- 22 June 2022
- Published by Springer Nature in Natural Hazards
- Vol. 114 (1) , 389-404
A refined model of a typhoon near-surface wind field based on CFD
- 22 June 2022
- Published by Springer Nature in Natural Hazards
- Vol. 114 (1) , 389-404
A refined model of a typhoon near-surface wind field based on CFD
- Open Access
Study on the Spatial Classification of Construction Land Types in Chinese Cities: A Case Study in Zhejiang Province
Identifying the land-use type and spatial distribution of urban construction land is the basis of studying the degree of exposure and the economic value of disaster-affected bodies, which are of great significance for disaster risk predictions, emergency disaster reductions, and asset allocations. Based on point of interest (POI) data, this study adopts POI spatialization and the density-based spatial clustering of applications with noise (DBSCAN) algorithm to accomplish the spatial classification of construction land. Zhejiang province is selected as a study area, and its construction land is divided into 11 land types using an accurate spatial classification method based on measuring the area of ground items. In the research, the POI dataset, which includes information, such as spatial locations and usage types, was constructed by big data cleaning and visual interpretation and approximately 620,000 pieces in total. The overall accuracy of the confusion matrix is 76.86%, which is greatly improved compared with that constructed with EULUC data (61.2%). In addition, compared with the official statistical data of 11 cities in Zhejiang Province, the differences between the calculated spatial proportions and statistics are not substantial. Meanwhile, the spatial characteristics of the studied land-use types are consistent with the urban planning data but with higher accuracy. The research shows that the construction land in Zhejiang Province has a high degree of land intensity, concentrated assets, and high economic exposure. The approach proposed in this study can provide a reference for city management including urbanization process, risk assessment, emergency management and asset allocation.
Open AccessStudy on the Spatial Classification of Construction Land Types in Chinese Cities: A Case Study in Zhejiang Province
Identifying the land-use type and spatial distribution of urban construction land is the basis of studying the degree of exposure and the economic value of disaster-affected bodies, which are of great significance for disaster risk predictions, emergency disaster reductions, and asset allocations. Based on point of interest (POI) data, this study adopts POI spatialization and the density-based spatial clustering of applications with noise (DBSCAN) algorithm to accomplish the spatial classification of construction land. Zhejiang province is selected as a study area, and its construction land is divided into 11 land types using an accurate spatial classification method based on measuring the area of ground items. In the research, the POI dataset, which includes information, such as spatial locations and usage types, was constructed by big data cleaning and visual interpretation and approximately 620,000 pieces in total. The overall accuracy of the confusion matrix is 76.86%, which is greatly improved compared with that constructed with EULUC data (61.2%). In addition, compared with the official statistical data of 11 cities in Zhejiang Province, the differences between the calculated spatial proportions and statistics are not substantial. Meanwhile, the spatial characteristics of the studied land-use types are consistent with the urban planning data but with higher accuracy. The research shows that the construction land in Zhejiang Province has a high degree of land intensity, concentrated assets, and high economic exposure. The approach proposed in this study can provide a reference for city management including urbanization process, risk assessment, emergency management and asset allocation.