XCXuanyi Chen

Xuanyi Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xuanyi Chen has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Polymer-integrated optical fiber Fabry–Pérot interferometer with Vernier effect for the detection of myoglobin

    by Zhuoyang Han, Xuanyi Chen, Yinping Miao, Yangyuan Zhang, Changping Xu

    Acute myocardial infarction (AMI) is the most severe manifestation of coronary artery disease and one of the leading causes of morbidity and mortality worldwide. The concentration of myoglobin (Mb) in serum has been regarded as an essential indicator for the early diagnosis of AMI. Developing a rapid, sensitive, and accurate Mb detection method is very important for the early diagnosis of AMI. This study reports a fiber optic biosensor based on polymer and Vernier effect composite sensitization for real-time detection of serum Mb concentration. The sensor is made of a Fabry–Pérot interferometer cascade tapered microfiber filled with photothermal material polydimethylsiloxane. Two interference structures with similar but unequal free spectral range are combined, and the superposition spectrum produces periodic interference fringes, forming a fiber sensor with a Vernier effect. By detecting the photothermal signal generated by the absorption of light by Mb, marker-free, specific detection can be achieved. The sensing device attained a sensitivity of 5.235 nm/(mg/L) in the 0.0001–10 mg/L concentration range. The linearity reached 0.9978, with a limit of detection of 3.82 ng/ml, which meets the sensitivity requirements for detecting Mb concentration in serum, and the detection time was less than 40 s, which has potential in the early diagnosis of related diseases.


  • Low-power high-stability all-optical modulator based on PtSe2 nanosheet integrated micro-nano fibers

    by Xiaoyuan Zhang, Jie Liu, Yuchen Zhang, Yangyuan Zhang, Xuanyi Chen, Yangbo Bai, Yinping Miao

    All-optical modulators based on two-dimensional (2D) materials hold promising application as key components in the fields of all-optical signal processing and fiber optic communications. In this study, we present an all-optical modulator based on PtSe2 nanosheets integrated with micro-nano fibers (PtSe2-MF) with low power and high stability. PtSe2 nanosheets were deposited on the surface of micro-nano fibers with a diameter of approximately 6 µm using an optical deposition method. A tunable laser with a wavelength of 1550 nm was used as the signal light for modulation, and the 980 nm pump light was coupled with the 1550 nm signal light into the micro-nano fibers (MFs). And the all-optical intensity modulation effect at mW level power was achieved by varying the optical power of the pump light and taking advantage of the absorption of light by PtSe2, to produce light matter interaction. The modulation depth of PtSe2-MF for signal light was measured to be 11.8 dB, the modulation efficiency was 0.295 dB/mW, and the rise and fall response times of the modulation were 22.5 ms and 24.2 ms, respectively. The modulation efficiency of the device only changed by 4.4% after being exposed to the environment for three months, indicating that it still has long-term stability for more than three months. Research has shown that PtSe2-MF has advantages of low power, fast response, high modulation efficiency, and high stability. It has broad application prospects in the field of all-optical modulation.

  • Wavelength-selective nonvolatile optical switch based on periodic Ge2Sb2Se4Te1-assisted racetrack micro-ring

    by Xuanyi Chen, Yinping Miao, Yangyuan Zhang, Yangbo Bai, Jianquan Yao

    Integrated silicon photonics based on phase-change materials have the advantages of energy efficiency, ultra-compactness, and nonvolatility, with a promising prospect in reconfigurable photonic systems. A wavelength-selective 1 × 2 nonvolatile optical switch based on a periodic Ge2Sb2Se4Te1 (GSST)-assisted racetrack silicon micro-ring is proposed, where the GSST is embedded in the micro-ring as a one-dimensional photonic crystal. The switch state changes from ‘OFF’ to ‘ON’ by changing the GSST state from amorphous to crystal. The results show that the extinction ratio of the device is 27.99 dB and 19.57 dB at the drop and through ports, respectively. The insertion loss is as low as 1.21 dB at the through port in the crystal state and 0.61 dB at the drop port in the amorphous state. The proposed on-chip optical switch significantly enhances device integration, offers a potential path toward the development of nonvolatile Si-GSST hybrid optical switches, and is crucial to realizing reconfigurable photonic systems. Furthermore, the resonant wavelength of the switch changes very little, by only 0.66 nm between the ‘ON’ and ‘OFF’ states, which is suitable for multichannel wavelength-division-multiplexing systems.

  • Low-power infrared-tunable all-optical intensity modulator based on micro-nano fiber integrated with 3C-SiC nanowires

    by Xuanyi Chen, Yuanzheng Li, Yinping Miao, Yi Li, Xiaoyuan Zhang, Yangbo Bai, Jian-Quan Yao

    In this paper, we present a rapidly responsive and highly modulated all-optical intensity modulator integrated with 3C-SiC nanowires and micro-nano fibers. The 3C-SiC nanowires were bonded to the surface of micro-nano fibers that had a diameter of around 2 µm. A tunable laser with a center wavelength of 1550 nm was used as the signal source, and the signal light, along with the 980 nm pump light, was coupled into the micro-nano fiber. Strong waveguide coupling between the micro-nano fiber and 3C-SiC nanowires facilitated modulation of the signal light by the pump light. The experimental results demonstrated a modulation depth of up to 5 dB for the signal light, with a modulation efficiency of 0.19 dB/mW. The rise time and fall time of the modulation were measured as 6.6 and 19.7 ms, respectively. This study shows the exceptional performance of 3C-SiC nanowires in all-optical modulation devices. Furthermore, the structure offers advantages such as simple fabrication, fast response speed, and compatibility with optical fiber systems, thus holding great potential for widespread application in various optical modulation devices and optical communication systems.

  • Low detection limit of uric acid based on Prussian blue-enhanced photothermal effect with microfiber knot resonator

    by Yangyuan Zhang, Yangbo Bai, Yinping Miao, Xuanyi Chen, Zhuoyang Han, Jianquan Yao

    The human serum uric acid (UA) level is a crucial indicator for diagnosing dementia in middle-aged and elderly individuals, with decreased levels being expressed in patients. Therefore, developing a high-performance sensor for online uric acid detection is of significant research interest. Herein, a microfiber knot resonator (MKR) sensor for quantitative detection of UA levels is reported. Combining polydimethylsiloxane (PDMS) with an adiabatic MKR, the specificity of UA detection in serum is improved using the photothermal effect of Prussian blue-enhanced uricase reaction. During the sensor operation, UA generates the photothermal effect under 650 nm laser irradiation, causing the PDMS film to expand with heat absorption, thereby shifting the resonance spectrum of the PDMS-MKR sensor. Experimental results demonstrate a sensitivity of 0.0559 nm/(μmol/L) within a UA concentration range of 40–120 μmol/L and a detection limit as low as 0.3578 μmol/L. The proposed sensor shows potential applications in clinical point-of-care early diagnosis and prognosis of dementia due to its specificity, fast detection speed, robustness, and high integration.