Billy D. O. Richards
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Billy D. O. Richards has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Animesh Jha
School of Chemical and Process Engineering, University of Leeds, Leeds, LS2 9JT, UK
5 shared publications Joris Lousteau
Department of Applied Science and Technology Politecnico di Torino Corso Duca degli Abruzzi 24 10129 Turin Italy
3 shared publicationsAnimesh Jha
2 shared publicationsGin Jose
Institute for Materials Research School of Process, Environmental and Materials Engineering University of Leeds Leeds LS2 9JT U.K
2 shared publicationsMehrdad Irannejad
Institute for Materials Research School of Process, Environmental and Materials Engineering University of Leeds Leeds LS2 9JT U.K
2 shared publicationsPurushottam Joshi
Corporate Research Laboratory Laird Technologies India Pvt. Ltd. ITPL Bangalore 560066 India
2 shared publications
Latest Publications
- 31 March 2017
- Published by Springer Nature
- p. 101-130
Lasers Utilising Tellurite Glass-Based Gain Media
- 31 March 2017
- Published by Springer Nature
- p. 101-130
Lasers Utilising Tellurite Glass-Based Gain Media
- 21 August 2013
- Published by Wiley in International Journal of Applied Glass Science
- Vol. 4 (3) , 192-201
Erbium‐Ion‐Doped Tellurite Glasss Fibers and Waveguides — Devices and Future Prospective: PART I
This review article focuses on the suitability of Er 3+ ‐doped tellurium oxide glass for optical amplification in fiber, waveguides and as a component for optical integration to meet the emerging demand for broadband and fiber‐to‐home networks. The importance of the glass structure, in the context of Er 3+ ‐ion spectroscopy, is emphasized for dissolving large concentrations of dopant ions. The spectroscopic methodologies involved in maximizing the gain per unit length of Er 3+ ‐doped fiber is explained. In Part II of this study, a review of how the fiber gain data was then employed to engineer amplification in waveguides, which can be integrated with semiconductor pump sources, is presented.
- 21 August 2013
- Published by Wiley in International Journal of Applied Glass Science
- Vol. 4 (3) , 192-201
Erbium‐Ion‐Doped Tellurite Glasss Fibers and Waveguides — Devices and Future Prospective: PART I
This review article focuses on the suitability of Er 3+ ‐doped tellurium oxide glass for optical amplification in fiber, waveguides and as a component for optical integration to meet the emerging demand for broadband and fiber‐to‐home networks. The importance of the glass structure, in the context of Er 3+ ‐ion spectroscopy, is emphasized for dissolving large concentrations of dopant ions. The spectroscopic methodologies involved in maximizing the gain per unit length of Er 3+ ‐doped fiber is explained. In Part II of this study, a review of how the fiber gain data was then employed to engineer amplification in waveguides, which can be integrated with semiconductor pump sources, is presented.
- Open Access
- 7 June 2013
- Published by Springer Nature in Discover Nano
- Vol. 8 (1) , 272
Femtosecond pulsed laser deposition of silicon thin films
: Optimisation of femtosecond pulsed laser deposition parameters for the fabrication of silicon thin films is discussed. Substrate temperature, gas pressure and gas type are used to better understand the deposition process and optimise it for the fabrication of high-quality thin films designed for optical and optoelectronic applications.
- 7 June 2013
- Published by Springer Nature in Discover Nano
- Vol. 8 (1) , 272
Open AccessFemtosecond pulsed laser deposition of silicon thin films
: Optimisation of femtosecond pulsed laser deposition parameters for the fabrication of silicon thin films is discussed. Substrate temperature, gas pressure and gas type are used to better understand the deposition process and optimise it for the fabrication of high-quality thin films designed for optical and optoelectronic applications.
- 6 May 2013
- Published by Wiley in International Journal of Applied Glass Science
- Vol. 4 (3) , 202-213
Erbium‐Ion‐Doped Tellurite Glass Fibers and Waveguides—Devices and Future Prospective: Part II
Following on from Part I of this review article that focuses on the suitability of Er 3+ ‐doped tellurium oxide glass for optical amplification in fiber, this Part II article describes how the fiber gain data were then employed to engineer amplification in waveguides, which can be integrated with semiconductor pump sources. The gain characteristics and bandwidth of a phosphate modified tellurite waveguide formed on a GaAs substrate are discussed. The limiting structural compatibility of Er 3+ ‐doped tellurite glass with polydimethylsiloxane polymer for active–passive integration is overcome by adopting a nanoscale super‐lattice approach for waveguide engineering.
- 6 May 2013
- Published by Wiley in International Journal of Applied Glass Science
- Vol. 4 (3) , 202-213
Erbium‐Ion‐Doped Tellurite Glass Fibers and Waveguides—Devices and Future Prospective: Part II
Following on from Part I of this review article that focuses on the suitability of Er 3+ ‐doped tellurium oxide glass for optical amplification in fiber, this Part II article describes how the fiber gain data were then employed to engineer amplification in waveguides, which can be integrated with semiconductor pump sources. The gain characteristics and bandwidth of a phosphate modified tellurite waveguide formed on a GaAs substrate are discussed. The limiting structural compatibility of Er 3+ ‐doped tellurite glass with polydimethylsiloxane polymer for active–passive integration is overcome by adopting a nanoscale super‐lattice approach for waveguide engineering.
- 1 November 2012
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8534, 853411
Mid-infrared emission from Dy3+doped tellurite bulk glass and waveguides
We present the fabrication and characterisation of Dy3+-doped tellurite glasses and waveguides for applications in the mid-IR. The low phonon energy and large rare-earth ion solubility of tellurite glasses, as well as having infrared transmission ranges up to 3+ doped tellurite bulk glasses exhibited very broad fluorescence from the 6H13/2 - 6H15/2 transition which extends from 3 μm to 3.6 μm FWHM compared to 2.9 μm to 3.1 μm in Dy3+ doped ZBLAN glass. This broad and red-shifted fluorescence band in tellurite glass may find use in LIDAR and sensing applications as it coincides with an atmospheric transmission band, compared to the ~3 μm emission of Dy3+ doped ZBLAN lasers which is absorbed by atmospheric water.
- 1 November 2012
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8534, 853411
Mid-infrared emission from Dy3+doped tellurite bulk glass and waveguides
We present the fabrication and characterisation of Dy3+-doped tellurite glasses and waveguides for applications in the mid-IR. The low phonon energy and large rare-earth ion solubility of tellurite glasses, as well as having infrared transmission ranges up to 3+ doped tellurite bulk glasses exhibited very broad fluorescence from the 6H13/2 - 6H15/2 transition which extends from 3 μm to 3.6 μm FWHM compared to 2.9 μm to 3.1 μm in Dy3+ doped ZBLAN glass. This broad and red-shifted fluorescence band in tellurite glass may find use in LIDAR and sensing applications as it coincides with an atmospheric transmission band, compared to the ~3 μm emission of Dy3+ doped ZBLAN lasers which is absorbed by atmospheric water.
- 11 April 2011
- Published by SPIE-Intl Soc Optical Eng in SPIE Newsroom
Oxide glasses for mid-infrared lasers
- 11 April 2011
- Published by SPIE-Intl Soc Optical Eng in SPIE Newsroom
Oxide glasses for mid-infrared lasers
- 1 March 2010
- Published by IOP Publishing in Laser Physics Letters
- Vol. 7 (3) , 177-193
Tellurite glass lasers operating close to 2μm
- 1 March 2010
- Published by IOP Publishing in Laser Physics Letters
- Vol. 7 (3) , 177-193
Tellurite glass lasers operating close to 2μm
- 25 April 2008
- Published by SPIE-Intl Soc Optical Eng
- Vol. 6998
Numerical rate equation modelling of a 1.61 ?m pumped ~2 ?m Tm3+-doped tellurite fibre laser
Near- and mid-infrared fibre lasers find many applications in areas such as remote and chemical sensing, lidar and medicine, and tellurite fibres offer advantages over other common fibre glasses such a lower phonon energy and higher rare-earth ion solubility than silicate glasses, and greater chemical and environmental stability than fluoride glasses. Rate equation modelling is a very useful tool for the characterisation and performance prediction of new rare earth transitions in these novel fibre materials. We present the numerical rate equation modelling results for a ~2 μm Tm3+-doped tellurite fibre laser when pumped with a 1.6 μm Er3+/Yb3+-doped double-clad silica fibre laser. A maximum slope efficiency of 76% with respect to launched pump power was achieved in the experimental fibre laser set up with a 32 cm long fibre. The high slope efficiency is very close to the Stokes efficiency limit of ~82% which is due to the in-band pumping scheme employed and the lack of pump excited state absorption. The two-level rate equations involving absorption and emission between the Tm3+: 3H6 and 3F4 levels have been solved iteratively using a fourth-order Runge-Kutta algorithm and the results compared with the experimental results. For the 32 cm fibre with output coupler reflectivities of 12%, 50%, 70% and 90%, the respective theoretical slope efficiencies of 73%, 64%, 53% and 29% are in very good agreement with the experimentally measured values of 76%, 60%, 48% and 33%.
- 25 April 2008
- Published by SPIE-Intl Soc Optical Eng
- Vol. 6998
Numerical rate equation modelling of a 1.61 ?m pumped ~2 ?m Tm3+-doped tellurite fibre laser
Near- and mid-infrared fibre lasers find many applications in areas such as remote and chemical sensing, lidar and medicine, and tellurite fibres offer advantages over other common fibre glasses such a lower phonon energy and higher rare-earth ion solubility than silicate glasses, and greater chemical and environmental stability than fluoride glasses. Rate equation modelling is a very useful tool for the characterisation and performance prediction of new rare earth transitions in these novel fibre materials. We present the numerical rate equation modelling results for a ~2 μm Tm3+-doped tellurite fibre laser when pumped with a 1.6 μm Er3+/Yb3+-doped double-clad silica fibre laser. A maximum slope efficiency of 76% with respect to launched pump power was achieved in the experimental fibre laser set up with a 32 cm long fibre. The high slope efficiency is very close to the Stokes efficiency limit of ~82% which is due to the in-band pumping scheme employed and the lack of pump excited state absorption. The two-level rate equations involving absorption and emission between the Tm3+: 3H6 and 3F4 levels have been solved iteratively using a fourth-order Runge-Kutta algorithm and the results compared with the experimental results. For the 32 cm fibre with output coupler reflectivities of 12%, 50%, 70% and 90%, the respective theoretical slope efficiencies of 73%, 64%, 53% and 29% are in very good agreement with the experimentally measured values of 76%, 60%, 48% and 33%.