MJMoeid Jamalzadeh

Moeid Jamalzadeh

*This is an algorithmically generated author record based on publicly available information.

Moeid Jamalzadeh has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Vapor-phase HMDS passivation improves performance and ambient stability of niobium superconducting resonators

    by Moeid Jamalzadeh, Miguel Manzo-Perez, Man Nguyen, Christopher Nadeau, Sooyeon Hwang, Jiwon Park, Iliya Shiravand, Kim Kisslinger, Xiao Tong, Matthew LaHaye, et al.

    Native oxide formation (NbOx) at the niobium (Nb) metal–air interface is a source of microwave loss and performance variability in superconducting resonators. We introduce vapor-phase hexamethyldisilazane (HMDS) as a dry surface passivation treatment compatible with standard nanofabrication workflows. In five independent fabrication runs, HMDS-passivated resonators consistently demonstrate improved internal quality factor (Qi) and narrower performance distribution relative to paired unpassivated controls. The Qi improvement occurs across the full microwave power range, suggesting NbOx suppression as a contributing mechanism. Statistical depth profile analysis of Nb oxidation state by electron energy loss spectroscopy corroborates this mechanism, revealing smaller chemical shifts and shallower oxidation depth in passivated specimens relative to the control. Furthermore, re-measurement after 60 days of ambient storage shows that HMDS-passivated resonators retain their Qi, indicating their ambient stability. These results establish vapor-phase HMDS as a surface passivation strategy with strong potential for superconducting quantum devices.

  • Hofstadter butterfly and quantum transport benchmarks in PVA-exfoliated graphene heterostructures

    by Zihan Zhang, Suji Park, Moeid Jamalzadeh, Kevin G. Yager, Takashi Taniguchi, Kenji Watanabe, Pilkyung Moon, Zhujun Huang, Davood Shahrjerdi

    Polymer exposure during van der Waals heterostructure fabrication is widely regarded as compromising the integrity of the electronic system required for hosting emergent quantum physics. This assumption has persisted largely because electronic benchmarking of heterostructures from polymer-exposed graphene has remained limited to only foundational transport metrics, such as mobility and charge inhomogeneity. Here, we challenge this assumption by establishing that graphene heterostructures produced by polyvinyl alcohol (PVA)-assisted exfoliation and encapsulated in hexagonal boron nitride using elevated-temperature lamination satisfy demanding quantum transport benchmarks. Beyond exhibiting ultra-high mobility and ballistic transport, these heterostructures yield quantum scattering times comparable to the best polymer-free devices. Most demanding of all, moiré superlattices from PVA-exposed graphene exhibit Hofstadter butterfly spectra, confirming spatially uniform interlayer coupling across the device area. These results establish that PVA exposure is compatible with low-disorder electronic systems, relaxing the trade-off between scalable fabrication and low-disorder quantum transport. This study motivates further development of polymer-assisted assembly with engineered residue-removal protocols.

  • Investigation of kinetic inductance and microwave loss in thin-film TaCxN1−x superconducting resonators

    by Iliya Shiravand, Moeid Jamalzadeh, Man Nguyen, Christopher Nadeau, Miguel Manzo Perez, Sooyeon Hwang, Xiao Tong, Dmytro Nykypanchuk, Matthew LaHaye, Davood Shahrjerdi

    The promise of tantalum for realizing superconducting quantum devices has generated interest in its compound films, particularly nitrides. Among these, cubic-phase tantalum carbonitride (TaCxN1−x) offers reduced susceptibility to oxidation and a high critical temperature, yet its microwave properties remain largely unexplored. Here, we investigate plasma-enhanced atomic layer deposition of cubic-phase TaCxN1−x thin films for superconducting microwave circuits. Structural and transport measurements reveal nanocrystalline morphology with sub-10 nm grains and superconductivity in the dirty limit. Coplanar waveguide resonators exhibit moderately high kinetic inductance (16.8 pH/sq for 30 nm films) with potential for enhancement through dimensional scaling. The films also support high internal quality factors exceeding 105 at 50 mK in the single-photon regime, comparable to granular aluminum. Loss analysis identifies the two-level systems as the dominant limiting mechanism, with potential for further reduction through interface engineering. These results establish atomic layer deposited TaCxN1−x as a promising material for scalable, low-loss, high-inductance superconducting circuits.


  • Substrate effects on phase formation and interfacial stability in superconducting vanadium silicide thin films

    by Miguel Manzo-Perez, Moeid Jamalzadeh, Sooyeon Hwang, Iliya Shiravand, Kim Kisslinger, Dmytro Nykypanchuk, Davood Shahrjerdi

    Thin films of vanadium silicide (V-silicide) in the A15 cubic phase (V3Si) are promising for superconducting quantum devices due to their high transition temperature and potential compatibility with scalable semiconductor fabrication. However, solid-phase synthesis often yields secondary silicide phases that degrade performance. Here, we investigate the influence of substrate properties using two silicon-on-insulator architectures: one with a polycrystalline HfO2 buried layer (group A) and the other with amorphous SiO2 (group B). Both systems exhibit superconductivity consistent with V3Si formation, yet structural analysis reveals mixed-phase films in both cases. Crucially, only group A maintains an atomically sharp and chemically stable interface, a prerequisite for phase purity. Prolonged annealing in group A reduces the unwanted V5Si3 phase but also leads to the emergence of Si-rich VSi2, likely due to localized substrate degradation. Preliminary atomic-resolution imaging suggests that HfO2 crystallinity may promote local phase-selective nucleation. These findings highlight the importance of substrate design in promoting phase control and maintaining interfacial integrity in superconducting silicides.


  • Physical patterning of high-Q superconducting niobium resonators via ion beam etching

    by Miguel Manzo-Perez, Moeid Jamalzadeh, Man Nguyen, Christopher Nadeau, Alexander Madden, Iliya Shiravand, Kim Kisslinger, Xiao Tong, Kasra Sardashti, Michael Senatore, et al.

    The development of superconducting quantum circuits increasingly involves the exploration of chemically distinct materials and complex multilayered structures. Accelerating this trend may benefit from low-damage, materials-agnostic patterning techniques that are compatible with a broad range of materials. Here, we investigate the utility of low-energy ion beam etching (IBE), a physical patterning technique, as an alternative to reactive ion etching for fabricating low-loss superconducting resonators. We use niobium (Nb) resonators as a test platform, leveraging their well-characterized performance metrics for benchmarking. To address IBE-induced surface redeposition, we introduce an in situ aluminum capping layer combined with targeted post-fabrication chemical treatment. This strategy yields resonators with internal quality factors as high as 6 × 105 in the single-photon regime at 50 mK. These results establish low-energy IBE as a promising patterning technique for superconducting devices, with the potential to accelerate development across chemically diverse and multilayered material platforms.


  • Effects of residual oxygen on superconducting niobium films

    by Miguel Manzo-Perez, Moeid Jamalzadeh, Zhujun Huang, Xiao Tong, Kim Kisslinger, Dmytro Nykypanchuk, Davood Shahrjerdi

    The integration of niobium (Nb) into emerging superconducting circuits can enhance their performance and function. However, growth of high purity Nb can be challenging due to its high reactivity with oxygen. Here, we examine the role of residual oxygen inside the growth chamber in transforming the structural, chemical, and superconducting properties of Nb films. We demonstrate that an increase in unintentional oxygen impurities lowers the superconducting critical temperature of Nb. This evolution coincides with the reduction of Nb crystal domains, which are separated by highly disordered oxygen-rich regions. Moreover, chemical analysis reveals the formation of niobium monoxide within the film during growth. These findings provide a comprehensive picture of how residual oxygen in the growth chamber can affect the properties of the Nb films. This study contributes to the materials science and engineering knowledge of superconducting Nb growth.