Su-Wan Choi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Su-Wan Choi has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Jeong-Yeol Choi
Department of Aerospace Engineering, Pusan National University, Busan 46241, Republic of Korea
5 shared publications - Bu-Kyeng Sung
Department of Aerospace Engineering, Pusan National University, Busan 46241, Republic of Korea
4 shared publications - Keon-Hyeong Lee
Department of Aerospace Engineering, Pusan National University, Busan 46241, Republic of Korea
4 shared publications - Gyeong-Ui Mo
Department of Aerospace Engineering, Pusan National University, Busan 46241, Republic of Korea
2 shared publications - Gyeong-Ui Mo2 shared publications
- Woo-Seok Han2 shared publications
Latest Publications
- 20 October 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Localized forced response of a model supersonic combustor to repetitive detonation forcing
- 20 October 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Localized forced response of a model supersonic combustor to repetitive detonation forcing
- 1 March 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (3)
Effects of chamber length on the structure of detonation waves in a non-premixed ethylene-oxygen rotating detonation engine
The present work has experimentally studied the effects of chamber length on flow fields of detonation waves in a non-premixed ethylene-oxygen rotating detonation engine (RDE). RDEs are constant-volume combustion devices offering higher performance than constant-pressure engines, with shorter chamber lengths that reduce weight and size, thereby improving efficiency. A comprehensive physical explanation for the stability and performance in RDEs at varied chamber lengths remains elusive. Experiments are performed at chamber lengths (30, 45, 60, 75, and 90 mm) and under a constant flow condition. Detonation waves are captured through a visible chamber wall and the RDE exit using two high-speed cameras simultaneously. Thrust and chamber pressure are measured to assess the performance of the RDE. Stable detonation wave cycles are observed at chamber lengths of 30 and 45 mm. At 60, 75, and 90 mm, the detonation waves demonstrate instability. This instability is attributed to interactions between combustion products from the previous cycle and an oblique shock in the current cycle, which may result in detonation quenching. The detonation wave speeds are reported as follows: 1414 m/s at the chamber length of 30 mm, and 1327 m/s at 90 mm. Pressure efficiency remains nearly uniform at 67%–69% for the chamber lengths of 45–90 mm, peaking at 76% for 30 mm. Thrust efficiency is consistently 79%–82% across the chamber lengths. The results provide insights into designing RDEs with an optimized chamber length, enabling stable detonation waves and minimizing detonation quenching, thereby improving RDE efficiency.
- 1 March 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (3)
Effects of chamber length on the structure of detonation waves in a non-premixed ethylene-oxygen rotating detonation engine
The present work has experimentally studied the effects of chamber length on flow fields of detonation waves in a non-premixed ethylene-oxygen rotating detonation engine (RDE). RDEs are constant-volume combustion devices offering higher performance than constant-pressure engines, with shorter chamber lengths that reduce weight and size, thereby improving efficiency. A comprehensive physical explanation for the stability and performance in RDEs at varied chamber lengths remains elusive. Experiments are performed at chamber lengths (30, 45, 60, 75, and 90 mm) and under a constant flow condition. Detonation waves are captured through a visible chamber wall and the RDE exit using two high-speed cameras simultaneously. Thrust and chamber pressure are measured to assess the performance of the RDE. Stable detonation wave cycles are observed at chamber lengths of 30 and 45 mm. At 60, 75, and 90 mm, the detonation waves demonstrate instability. This instability is attributed to interactions between combustion products from the previous cycle and an oblique shock in the current cycle, which may result in detonation quenching. The detonation wave speeds are reported as follows: 1414 m/s at the chamber length of 30 mm, and 1327 m/s at 90 mm. Pressure efficiency remains nearly uniform at 67%–69% for the chamber lengths of 45–90 mm, peaking at 76% for 30 mm. Thrust efficiency is consistently 79%–82% across the chamber lengths. The results provide insights into designing RDEs with an optimized chamber length, enabling stable detonation waves and minimizing detonation quenching, thereby improving RDE efficiency.
- 25 October 2025
- Published by Elsevier in Combustion and Flame
- Vol. 283
Experimental investigation of the combustion dynamics in a coreless Disk-RDRE and relevance to tangential combustion instability
- 25 October 2025
- Published by Elsevier in Combustion and Flame
- Vol. 283
Experimental investigation of the combustion dynamics in a coreless Disk-RDRE and relevance to tangential combustion instability
- Open Access
Spectral Emissivity Measurement of Supersonic Nozzles for Radiative Cooling Performance Evaluation
In this study, emissivity was employed as the primary metric for evaluating the radiative-cooling performance of a supersonic nozzle under flight-like conditions. A supersonic nozzle was fabricated by PBF, after which combustion (hot-fire) tests and emissivity measurements were carried out. These data enabled quantification and visualization of radiant energy in the 8–14 µm-wavelength band during combustion. The hot-fire tests revealed a clear cap-shock pattern, confirming that the nozzle flow was fully developed. Emissivity measurements showed that the additively manufactured surface—subsequently treated by the AMS 5662 heat-treatment process—followed the angular-emission trends reported in previous studies. The surface exhibited a high roughness (Ra ≈ 30 µm) and an emissivity of 0.85 in the 8–14 µm band; a temperature-dependent emissivity fitting function was accordingly derived. By coupling the combustion test results with the emissivity data, the actual temperature distribution along the nozzle surface and the corresponding radiant energy in the 8–14 µm band were quantitatively reconstructed and visualized. The maximum emissive power in this band reached 2214 W m−2, representing at least 16.61% of the total black-body radiation at 700 K.
Open AccessSpectral Emissivity Measurement of Supersonic Nozzles for Radiative Cooling Performance Evaluation
In this study, emissivity was employed as the primary metric for evaluating the radiative-cooling performance of a supersonic nozzle under flight-like conditions. A supersonic nozzle was fabricated by PBF, after which combustion (hot-fire) tests and emissivity measurements were carried out. These data enabled quantification and visualization of radiant energy in the 8–14 µm-wavelength band during combustion. The hot-fire tests revealed a clear cap-shock pattern, confirming that the nozzle flow was fully developed. Emissivity measurements showed that the additively manufactured surface—subsequently treated by the AMS 5662 heat-treatment process—followed the angular-emission trends reported in previous studies. The surface exhibited a high roughness (Ra ≈ 30 µm) and an emissivity of 0.85 in the 8–14 µm band; a temperature-dependent emissivity fitting function was accordingly derived. By coupling the combustion test results with the emissivity data, the actual temperature distribution along the nozzle surface and the corresponding radiant energy in the 8–14 µm band were quantitatively reconstructed and visualized. The maximum emissive power in this band reached 2214 W m−2, representing at least 16.61% of the total black-body radiation at 700 K.
- Open Access
Effects of Fuel Penetration on the RDE Performance with JISC Injector Configuration
This study investigates the operational characteristics of the Rotating Detonation Engine (RDE), with a focus on fuel injector design. Inspired by the similarity between the fuel injection structure of RDE and the Jet in Supersonic Crossflow (JISC) of a scramjet, experimental research on fuel injectors with jet penetration was conducted. Five injectors were designed, each with a fixed fuel injection area or injection hole diameter. Experiments determined practical injection areas, and an empirical correlation was used to calculate jet penetration heights. Under conditions of a total mass flow rate of 105 ± 5 g/s and an equivalence ratio of 1.05 ± 0.1, combustion modes were analyzed. Initial detonation occurrence was assessed through pressure history, with a detailed analysis via image post-processing. The results indicated that the injector D4N15, with the highest jet penetration height, exhibited deflagration, while D4N23 showed chaotic propagation. The injector D2N60 demonstrated relatively unstable behavior in sustained detonation cases. Thrust comparisons revealed that D4N30, with wider hole spacing and higher jet penetration height, exhibited approximately 12.5% higher specific impulse compared to D1N240. These outcomes confirm the significant impact of jet penetration height and hole spacing on detonation propagation and engine performance.
Open AccessEffects of Fuel Penetration on the RDE Performance with JISC Injector Configuration
This study investigates the operational characteristics of the Rotating Detonation Engine (RDE), with a focus on fuel injector design. Inspired by the similarity between the fuel injection structure of RDE and the Jet in Supersonic Crossflow (JISC) of a scramjet, experimental research on fuel injectors with jet penetration was conducted. Five injectors were designed, each with a fixed fuel injection area or injection hole diameter. Experiments determined practical injection areas, and an empirical correlation was used to calculate jet penetration heights. Under conditions of a total mass flow rate of 105 ± 5 g/s and an equivalence ratio of 1.05 ± 0.1, combustion modes were analyzed. Initial detonation occurrence was assessed through pressure history, with a detailed analysis via image post-processing. The results indicated that the injector D4N15, with the highest jet penetration height, exhibited deflagration, while D4N23 showed chaotic propagation. The injector D2N60 demonstrated relatively unstable behavior in sustained detonation cases. Thrust comparisons revealed that D4N30, with wider hole spacing and higher jet penetration height, exhibited approximately 12.5% higher specific impulse compared to D1N240. These outcomes confirm the significant impact of jet penetration height and hole spacing on detonation propagation and engine performance.