DHDavid Heyner

David Heyner

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


David Heyner has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development and testing of timber-metal-hybrid materials for the side sill reinforcement of a battery electric vehicle

    by David Heyner, Thomas Feser, Maik Schulze, Tjark Siefkes, Elmar Beeh, Daniel Kohl

    The development of more sustainable material solutions and the reduction of CO 2 -emissions in the production phase is one of the biggest challenges in current vehicle design. An approach to meet these requirements is the usage of renewable raw materials. Wood has excellent specific material properties comparable to aluminum and a negative CO 2 -footprint as CO 2 is stored during growth. The usage of timber for vehicle structures has already been investigated in previous projects and certain disadvantages of wood were identified. Compared to metals the elongation to fracture is low causing a brittle material behavior. Another effect is an increasing load level for compression due to compaction. In the project “SuMatHrA” the usage of a timber-steel-hybrid material for a side sill reinforcement of a battery electric vehicle is investigated. The current design of this component for different car brands is an extruded aluminum profile. The main function of this component is to protect the battery during a side crash. The lightweight wood Albasia with a density of approximately 0.3 t/m³ was used for this project. The wood was processed to laminated veneer lumber (LVL) and hybridized with a thin steel sheet. The load was applied in fiber direction causing a crushing of the LVL. To validate the developed hybrid material an aluminum profile from a current production car was used as reference. In quasi static tests it could be shown that the specific energy absorption could be increased by up to 25% compared to the extruded aluminum profile.


  • Werkstoffsysteme mit Zukunft

    by Horst E. Friedrich, Oliver Schauerte, Gerhard Kopp, Josef Wünsch, Jochen Engelmann, Daniel Freidank, Axel Gottschalk, Patrick Keil, David Heyner, Elmar Beeh, et al.

  • Open Access

    Innovative concepts for the usage of veneer-based hybrid materials in vehicle structures

    by Db Heyner, G Piazza, E Beeh, G Seidel, He Friedrich, D Kohl, H Nguyen, C Burgold, D Berthold

    A promising approach for the development of sustainable and resource-saving alternatives to conventional material solutions in vehicle structures is the use of renewable raw materials. One group of materials that has particular potential for this application is wood. The specific material properties of wood in the longitudinal fiber direction are comparable to typical construction materials such as steel or aluminum. Due to its comparatively low density, there is a very high lightweight construction potential especially for bending load cases. Structural components of the vehicle body are exposed to very high mechanical loads in the case of crash impact. Depending on the component under consideration, energy has to be absorbed and the structural integrity of the body has to be ensured in order to protect the occupants. The use of natural materials such as wood poses particular challenges for such applications. The material characteristics of wood are dispersed, and depend on environmental factors such as humidity. The aim of the following considerations was to develop a material system to ensure the functional reliability of the component. The test boundary conditions for validation also play a key role in this context. The potential of wood–steel hybrid design based on laminated veneer lumber and steel was investigated for use in a component subjected to crash loads such as the door impact beam. The chosen solution involves a separation of functions. A laminated veneer lumber-based beam was hybridized with a steel strip on the tension side. The steel strip was designed to compensate the comparatively low elongation at fracture of the wood and to ensure the integrity of the beam. The wooden component was designed for high energy absorption due to delamination and controlled failure during the impact, while maintaining the surface moment of inertia, i.e. the bending stiffness of the entire component. This approach was chosen to ensure the functional safety of the component, avoid sudden component failure and utilize the high potential of both materials. The tests carried out provided initial functional proof of the chosen solution. The hybridization achieved significantly higher deformations without sudden failure of the beam. In addition, bending capabilities were increased significantly compared to a beam without hybridization. In comparison with a state-of-the-art steel beam, the hybrid beam was not able to achieve the maximum deformation and the target weight of the hybrid beam. Further optimization of the hybrid beam is therefore necessary.