SSSifan Sun

Sifan Sun

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sifan Sun has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A 40 nm Buffer-Free 7T-SRAM Analog Charge-Domain CIM Macro With Merging Timing Based On Time-Row Division Strategy

    by Linjun Jiang, Jianxin Wu, Sifan Sun, Changyu Li, Wang Kang, He Zhang

    Computing-in-memory (CIM) macros based on static random access memory (SRAM) are meant to increase capacity while improving energy efficiency and reducing computing latency. However, traditional analog designs still face several key challenges, including long computing latency from separated computing phases, negative voltage fluctuations from massive parallel computing, and low bitcell density from additional transistors and capacitors for multiplication. On the other hand, only time-aligned inputs are supported in the works. To overcome the above challenges, this work proposes a buffer-free 7T-SRAM charge-domain CIM macro. It has four key features: 1) a compact 7T SRAM bitcell structure for high-energy efficiency; 2) a configurable input unit to support different sizes of input activations; 3) a time-row division (RD) strategy to support real-time processing and alleviate negative voltage fluctuations; and 4) a merging timing to conceal the input phase for high throughput. The fabricated 512-Kb SRAM-CIM macro in 40 nm achieves 79.3–290.4 Tops/W at 4-bit precision.

  • High-Efficiency and Low-Deviation Analog–Digital Hybrid Compute-in-Memory Architecture With Dynamic Weight Division

    by Jianxin Wu, Linjun Jiang, Sifan Sun, Wente Yi, Yitong Zhou, Zhenyu Huang, Dengwen Li, Wang Kang, He Zhang, Weisheng Zhao

    Compute-in-memory (CIM) reduces data movement but suffers from an accuracy–efficiency trade-off: Analog CIM (ACIM) is energy-efficient but loses accuracy and incurs higher cost at large bit-widths, while digital CIM (DCIM) supports high precision but is inefficient for low-precision tasks. To overcome these challenges, we propose an analog–digital hybrid CIM (HCIM) architecture to address this trade-off, including 1) an analog–digital hybrid 10T SRAM cell without additional transistors and a dual-capacitor-based multicycle weighting module to reduce area; 2) a successive-approximation-register (SAR) ADC with a pseudo C-2C capacitor array that can be reconfigured from an 8-bit ADC into two parallel 4-bit ADCs to improve configurability; 3) configurable weight division and computing resource allocation strategies. Simulations in a 28-nm process show that HCIM achieves 15.56 TOPS/W at 12-bit ( $8+4$ ) with $1.33\times $ and $2.35\times $ efficiency improvement over DCIM and ACIM and $16\times $ lower error. It achieves 27.87 TOPS/W at 8-bit and 78.13 TOPS/W at 4-bit, demonstrating superior energy efficiency, computational accuracy, and flexibility.


  • A Self-Decryption Pass Transistor Logic-Based In-MRAM Computing Macro Using Hybrid VGSOT-MTJ/GAA-CNTFET

    by Zhongzhen Tong, Sifan Sun, Kaili Zhang, Chenghang Li, Jiye Yao, Yulong Qiu, Chao Wang, Zhaohao Wang, Ke Zhang, Amara Amara, et al.

    Spintronic devices and gate-all-around carbon nanotube field-effect-transistors (GAA-CNTFETs)-based computing in-memory architecture are competitive candidates for applications in battery-powered tiny artificial intelligence (AI) edge devices. Meanwhile, data encryption and decryption are also necessary to protect AI model weights and the customized data used to guarantee neural network (NN) inference accuracy. In this study, we propose a self-decryption pass transistor logic (PTL)-based in-MRAM computing macro (SP-CIM) that utilizes hybrid voltage-gated spin-orbit torque magnetic tunnel junctions (VGSOT-MTJ)/GAA-CNTFET. The proposed SP-CIM macro enables simultaneous data access, decryption, and full-accuracy multiply-and-accumulate (MAC) operations using the newly introduced voltage-divider self-decryption cell, without the need for additional decryption logic. Compared to existing in-memory decryption strategies, this design reduces energy consumption by 45.7% and decreases decryption delay by 87.2%. To enhance area efficiency and reduce computing latency, we propose a PTL-based multiplication cell that achieves full-accuracy local 2b-IN $\times 2$ b-W operations with only 20 transistors (20T). Additionally, novel PTL-based full-swing output half adders (10T-HA) and full adders (14T-FA) are proposed to construct the local adder tree, achieving reductions of 31.8%, 76.4%, and 41.4% in energy, delay, and area, respectively, compared to conventional adder trees in CIM macros. Simulations of the 288 kb SP-CIM macro demonstrated throughput and energy efficiency of 2.25 TOPS and 226.6 TOPS/W, respectively, at a 0.6 V supply voltage, and 2.97 TOPS and 154.1 TOPS/W, respectively, at a 0.8 V supply voltage, with 8b-IN, 8b-W, and 24b-OUT.


  • Open Access

    A 24.65 TOPS/W@INT8 Hybrid Analog-Digital Multi-core SRAM CIM Macro with Optimal Weight Dividing and Resource Allocation Strategies

    by Yitong Zhou, Wente Yi, Sifan Sun, Wenjia Wang, Jinyu Bai, He Zhang, Wang Kang

    Compute-in-memory (CIM) technology integrates memory and computation to reduce memory bottlenecks in modern systems. However, current CIM architectures face challenges in balancing accuracy and energy efficiency. Analog-CIM (ACIM) is energy-efficient but less accurate, while Digital-CIM (DCIM) is accurate but consumes more energy. In this paper, we propose a novel multi-core hybrid analog-digital CIM macro that effectively addresses this trade-off. Our approach intelligently allocates computation tasks to ACIM and DCIM cores based on their accuracy requirements, achieving a balance of accuracy and efficiency. Additionally, we developed an optimization framework to determine the optimal weight divide ratio and computing resource allocation for the hybrid CIM. Experimental results demonstrate the efficacy of our approach. The proposed hybrid CIM achieves an outstanding energy efficiency of 24.65 TOPS/W at 8-bit precision, surpassing DCIM by a factor of 1.33 while maintaining a low error rate of only 0.4%, which is 30 times better than ACIM at the same precision.


  • HiT-CIM: A High-Throughput Compute-in-Memory SRAM Architecture With Simultaneous Weight Loading/Computing and Balance Capabilities

    by Junzhan Liu, Sifan Sun, Liang Zhang, Lichuan Luo, Liang Ran, He Zhang, Wang Kang, Weisheng Zhao

    In the post-Moore's era, compute-in-memory (CIM) techniques are promising to break the memory wall. In particular, SRAM-based CIMs (SRAM-CIMs) have attracted widespread attention owing to its good scalability with advanced process. At present, a rich variety of works focus on energy-efficiency improvement by either designing different bit-cell structures or optimizing circuit/chip architectures. However, owing to the CIM's primitive property to store one of the operands in the memory bit-cells, substantial computing resource is wasted by suspension during the operands loading procedure. In this paper, a high-throughput SRAM-CIM (HiT-CIM) architecture with simultaneous weight loading and computing capabilities is proposed by integrating on-chip nonvolatile MRAM (magnetic random-access memory). Meanwhile, both the mainstream current-domain and charge-domain SRAM bit-cell structures are optimized to support such an architecture. Furthermore, a reconfigurable fully-pipelined MRAM is designed to provide fast data loading in HiT-CIM, which can finetune weight loading strategy rapidly for different neural network models. Afterwards, an optimal evaluation and configuration strategy is proposed to improve the macro-level performance by considering the key components and parameters in terms of SRAM array, ADC, MRAM structure and frequency. Finally, the HiT-CIM's feasibility is verified under a 40-nm foundry's process. The results show that a multiple-fold speed improvement can be obtained on VGG19, ResNet18 and MobileNetV1, respectively. In specific, the area efficiency of HiT-CIM on VGG19 achieves 1124 GOPS/mm2 and 1880.12 GOPS/mm2 for the current-domain and chargedomain SRAM-CIMs, respectively. Up to 5.3× improvement is realized compared with prior works


  • In-MRAM Computing Based on Complementary-Sensing Time-Based Readout Circuit Using Hybrid VGSOT-MTJ/GAA-CNTFET

    by Zhongzhen Tong, Sifan Sun, Kaili Zhang, Chenghang Li, Daming Zhou, Zhaohao Wang, Xiaoyang Lin, Weisheng Zhao

    Gate-all-around carbon nanotube field-effect-transistors (GAA-CNTFETs) and voltage-gated spin-orbit torque magnetic tunnel junctions (VGSOT-MTJs) are expected to realize significant savings in energy consumption and computing delay compared to the existing silicon-based FinFETs. This brief proposes an in-MRAM computing macro based on a newly developed complementary-sensing time-based readout circuit (CSTRC) to accelerate binary neural networks (BNNs). An 8 kb MRAM was simulated using both GAA-CNTFET/VGSOT-MTJ and 14 nm FinFET/VGSOT-MTJ technologies to validate the effectiveness of the proposed design. The proposed CSTRC can achieve read operations and binary multiply-and-accumulate (BMAC) without additional peripheral circuits and achieve a notable decrease in the read bit error rate and column-level conditional row error rate by 1–5 and 1–13 orders of magnitude, respectively, compared to those reported previously. Moreover, under the GAA-CNTFET/VGSOT-MTJ process, the read energy consumption and delay were reduced by 59.1–78.9% and 23.9–29.7%, respectively; the BMAC energy efficiency and throughput were 10231 1-b TOPS/W and 1.8 TOPS, respectively increased by 2.9 and 1.27 times at 0.8 V supply voltage when comparing to its 14-nm FinFET /VGSOT-MTJ counterparts.