Giovanna Raizer da Silva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Giovanna Raizer da Silva has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Alan Rodrigo Sorce
Universidade Federal de Alfenas, Brasil
3 shared publications - Igor Rafael Buttignol de Oliveira
Universidade Federal de Alfenas, Brasil
3 shared publications - Sylma Carvalho Maestrelli
Universidade Federal de Alfenas, Brasil
3 shared publications - Ana Paula Margarido Menegazzo
Centro Cerâmico do Brasil
1 shared publication - Caroline Moraes da Cruz
Universidade de São Paulo
1 shared publication - Eliana Cristina da Silva Rigo
Universidade de São Paulo
1 shared publication
Latest Publications
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 18 (5)
Bio-UHPC: analysis of the addition of alginate-sodium capsules with Lysinibacillus sphaericus in ultra-high-performance concrete
Cracks in concrete compromise its mechanical strength and expose its interior, making it more susceptible to the external environment. Ultra-High-Performance Concrete (UHPC) is also susceptible to this situation. Repair methods are still often inefficient in the long-term and can cause potential damage to the environment both in their use and in their production, leading to contamination by toxic components and by-products. A new alternative emerges with strong environmental appeal: the self-healing of cracks assisted by microorganisms. This research investigated the addition effect of the encapsulated biomineralizing bacteria Lysinibacillus sphaericus on the rheological, physical, and mechanical properties of ultra-high-performance concretes, and on the filling of concrete cracks by MICP (Microbial Induced Calcium-Carbonate Precipitation). Sodium alginate capsules containing the bacterial material were produced and inserted into UHPC specimens in the proportions of 0% (standard formulation), 0.5%, 1.0% and 1.5% to the cement mass. By descriptive statistics and analysis of variance (ANOVA), it was verified that the mechanical properties of the UHPC, within the curing period of 7, 14 and 28 days, were not affected with the additions of the capsules; nor were identified statistically significant changes in the porosity (5.0–5.5%) of the material or in the water absorption ratio (2.2–2.5%), when compared to the standard formulation, proving that the addition of capsules containing bacterial material to the specimens was positive. Moreover, it was verified the efficiency of the technique used for encapsulation and protection of the bacteria and the deposition of calcium carbonate in the crack of the specimens by optical microscopy images. The results indicate that the adopted methodology has high potential for the development of self-healing UHPC bio-concretes.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Revista IBRACON de Estruturas e Materiais
- Vol. 18 (5)
Open AccessBio-UHPC: analysis of the addition of alginate-sodium capsules with Lysinibacillus sphaericus in ultra-high-performance concrete
Cracks in concrete compromise its mechanical strength and expose its interior, making it more susceptible to the external environment. Ultra-High-Performance Concrete (UHPC) is also susceptible to this situation. Repair methods are still often inefficient in the long-term and can cause potential damage to the environment both in their use and in their production, leading to contamination by toxic components and by-products. A new alternative emerges with strong environmental appeal: the self-healing of cracks assisted by microorganisms. This research investigated the addition effect of the encapsulated biomineralizing bacteria Lysinibacillus sphaericus on the rheological, physical, and mechanical properties of ultra-high-performance concretes, and on the filling of concrete cracks by MICP (Microbial Induced Calcium-Carbonate Precipitation). Sodium alginate capsules containing the bacterial material were produced and inserted into UHPC specimens in the proportions of 0% (standard formulation), 0.5%, 1.0% and 1.5% to the cement mass. By descriptive statistics and analysis of variance (ANOVA), it was verified that the mechanical properties of the UHPC, within the curing period of 7, 14 and 28 days, were not affected with the additions of the capsules; nor were identified statistically significant changes in the porosity (5.0–5.5%) of the material or in the water absorption ratio (2.2–2.5%), when compared to the standard formulation, proving that the addition of capsules containing bacterial material to the specimens was positive. Moreover, it was verified the efficiency of the technique used for encapsulation and protection of the bacteria and the deposition of calcium carbonate in the crack of the specimens by optical microscopy images. The results indicate that the adopted methodology has high potential for the development of self-healing UHPC bio-concretes.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 28 (suppl 1) , e20240606
Effect of the Addition of Graphene Oxide (GO) to Reactive Powder Concretes (RPC): Physical, Mechanical, and Microstructural Evaluation
Adjustments and changes in concrete formulations aim to improve physical and mechanical properties. This research analysed the influence of the addition of graphene oxide (GO) to reactive powder concretes (RPC) on their structure and properties. The addition of GO (0.025% and 0.050% by cement weight) resulted in significant improvements in the mechanical and microstructural properties of the RPC, increasing compressive (up to 19.14%) and flexural strength (up to 11.80%), as well as a reducing water absorption and porosity. Statistical analyses (ANOVA and Tukey's ad hoc test) confirmed the significance of the results. Scanning electron microscopy (SEM) showed greater formation of C-S-H around the GO nanosheets, resulting in an increase of mechanical strength. It was concluded that the addition of GO helps the RPC allowing a greater homogeneity in the mixture, enhancing mechanical strength (up to around 130 MPa at 28 days of curing), and reducing the RPC porosity and water absorption.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 28 (suppl 1) , e20240606
Open AccessEffect of the Addition of Graphene Oxide (GO) to Reactive Powder Concretes (RPC): Physical, Mechanical, and Microstructural Evaluation
Adjustments and changes in concrete formulations aim to improve physical and mechanical properties. This research analysed the influence of the addition of graphene oxide (GO) to reactive powder concretes (RPC) on their structure and properties. The addition of GO (0.025% and 0.050% by cement weight) resulted in significant improvements in the mechanical and microstructural properties of the RPC, increasing compressive (up to 19.14%) and flexural strength (up to 11.80%), as well as a reducing water absorption and porosity. Statistical analyses (ANOVA and Tukey's ad hoc test) confirmed the significance of the results. Scanning electron microscopy (SEM) showed greater formation of C-S-H around the GO nanosheets, resulting in an increase of mechanical strength. It was concluded that the addition of GO helps the RPC allowing a greater homogeneity in the mixture, enhancing mechanical strength (up to around 130 MPa at 28 days of curing), and reducing the RPC porosity and water absorption.
- Open Access
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29 (3) , e20240187
Effect of adding chitosan capsules produced by ionotropic gelation on the mechanical properties of mortars
To ensure the viability of bacteria in the biomineralization process for crack filling and healing, protection from the heat (generated by cement hydration) and the retraction (during hardening) of the microorganisms is required. Superabsorbent polymers, as chitosan, known for their resistance during mixing and water storage capacity, are suitable bacteria carriers. This study aimed to determine the optimal percentage of chitosan capsules and its effects on the physical and mechanical properties in mortars. Mortar formulations containing 0.5%, 1.0%, and 1.5% of chitosan capsules (relative to the total cement weight) were developed keeping the original granulometric distribution. Analysis of variance (ANOVA) for each individual property and post-hoc tests with corrections of Bonferroni and Tukey demonstrated that the formulation significantly impacted both properties through aging. Formulations AQ-0.5C and AQ-1.0C (0.5% and 1.0% of capsules respectively) maintained the flow levels comparable to the original formula. AQ-0.5C showcased the most favorable outcomes, exhibiting mechanical resistance up to 10% higher than the capsule-free original formula. Even slightly inferior results, AQ-1.0C still presented a higher strength mechanical up to 5% over the original formula. These results indicate the potential use of the ionotropic gelation to produce spores with bacteria to be applied in biomineralization for sealing cracks.
- 1 January 2024
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 29 (3) , e20240187
Open AccessEffect of adding chitosan capsules produced by ionotropic gelation on the mechanical properties of mortars
To ensure the viability of bacteria in the biomineralization process for crack filling and healing, protection from the heat (generated by cement hydration) and the retraction (during hardening) of the microorganisms is required. Superabsorbent polymers, as chitosan, known for their resistance during mixing and water storage capacity, are suitable bacteria carriers. This study aimed to determine the optimal percentage of chitosan capsules and its effects on the physical and mechanical properties in mortars. Mortar formulations containing 0.5%, 1.0%, and 1.5% of chitosan capsules (relative to the total cement weight) were developed keeping the original granulometric distribution. Analysis of variance (ANOVA) for each individual property and post-hoc tests with corrections of Bonferroni and Tukey demonstrated that the formulation significantly impacted both properties through aging. Formulations AQ-0.5C and AQ-1.0C (0.5% and 1.0% of capsules respectively) maintained the flow levels comparable to the original formula. AQ-0.5C showcased the most favorable outcomes, exhibiting mechanical resistance up to 10% higher than the capsule-free original formula. Even slightly inferior results, AQ-1.0C still presented a higher strength mechanical up to 5% over the original formula. These results indicate the potential use of the ionotropic gelation to produce spores with bacteria to be applied in biomineralization for sealing cracks.