SHShiji Huang

Shiji Huang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shiji Huang has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Modal Identification of a Wind Turbine Via a Hybrid Operational Modal Analysis Scheme Considering Harmonic Interference

    by Shiji Huang, Qiusheng Li, Chenzhi Cai, Mengmeng Sun

    Operational Modal Analysis (OMA) is an essential tool for determining structural dynamic properties of wind turbines. However, the presence of harmonic excitation in wind turbines poses a significant challenge for the effective application of traditional white noise-based OMA techniques. When some harmonic frequencies are close to structural frequencies, harmonics may introduce bias in modal estimations or be misidentified as structural modes, thereby resulting in inaccurate determination of structural dynamic properties of wind turbines. To this end, a hybrid OMA scheme is developed in this paper to mitigate harmonic disturbances in vibration responses and thus enable performing precise modal estimation with uncertainty quantification for wind turbines. The noise robustness, stability, and accuracy of the hybrid OMA scheme are verified through a numerical simulation study. Furthermore, the hybrid OMA scheme is employed to evaluate the structural dynamic properties of a three-bladed 2.0 MW wind turbine for assessing its feasibility in practical applications. The primary objective of this study is to provide a hybrid OMA scheme that can accurately estimate modal parameters of wind turbines and other structures with rotating components.


  • The thermal responses of composite box girder bridges with corrugated steel webs under solar radiation

    by Chenzhi Cai, Ming Xu, Xuhui He, Yunfeng Zou, Shiji Huang

    Owing to the direct exposure to complex atmospheric environments, the temperature field of composite box girder bridge with corrugated steel webs (CBGB-CSW) is likely non-uniformly distributed. Whereas, the current researches regarding the thermal responses of CBGB-CSW are insufficient, and the thermal responses of CBGB-CSW under solar radiation are still unknown. Therefore, this paper conducted a long-term temperature experiment on a scaled model to explore the temperature distribution characteristics in CBGB-CSW. Meanwhile, a three-dimensional thermal–mechanical coupling Finite Element (FE) model is established to simulate the temperature field in the experiment girder. The accuracy and effectiveness of the developed FE model has been verified by the measured temperature data. Therewith, the thermal responses (i.e., stress and displacement) of a full-scale continuous CBGB-CSW with a span of 150 m are numerically investigated. The results indicate that the maximum stresses always occur at the midspan section (with a depth of 5 m) of the continuous CBGB-CSW, and considerable concentrations of stress are observed in the steel-concrete junction. The maximum longitudinal tensile and compressive normal stresses within 0.4 m of the upper junction can reach 5.55 MPa and −8.46 MPa respectively, and those of the lower junction can reach 6.96 MPa and −7.05 MPa respectively. Besides, owing to the impacts of vertical and horizontal temperature gradients, significant displacements of the whole bridge can also be observed. The maximum vertical displacement (5.33 mm) of the CBGB-CSW is estimated at the top plate in the midspan, while the maximum horizontal displacement (0.74 mm) is estimated at the trough of the southern corrugated steel web in the midspan. Notably, the outcomes of this paper can provide some useful references for engineers and scholars to understand the thermal responses of the CBGB-CSW.