XZXiaozu Zhang

Xiaozu Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaozu Zhang has a total of 28 co-authors. Here are the top co-authors by number of shared publications:

  • Dongtao Wang

    High-Performance Metal Structural Materials Research Institute, School of Metallic Materials and Advanced Manufacturing, Soochow University, Suzhou 215021, China

    4 shared publications
  • Haitao Zhang

    High-Performance Metal Structural Materials Research Institute, School of Metallic Materials and Advanced Manufacturing, Soochow University, Suzhou 215021, China

    4 shared publications
  • Lin Zhao

    High-Performance Metal Structural Materials Research Institute, School of Metallic Materials and Advanced Manufacturing, Soochow University, Suzhou 215021, China

    2 shared publications
  • Minghe Zhang

    High-Performance Metal Structural Materials Research Institute, School of Metallic Materials and Advanced Manufacturing, Soochow University, Suzhou 215021, China

    2 shared publications
  • Rui Wang

    High-Performance Metal Structural Materials Research Institute, School of Metallic Materials and Advanced Manufacturing, Soochow University, Suzhou 215021, China

    2 shared publications
  • Ying Gao

    Binzhou Institute of Technology, Weiqiao-UCAS Science and Technology Park, Binzhou 256606, China

    2 shared publications

Latest Publications

  • Open Access

    Transformation Mechanism of Fe-Containing Phases in Recycled Aluminum Alloys by First-Principles Calculations

    by Xiaozu Zhang, Zhicheng Yin, Dongtao Wang, Hiromi Nagaumi, Rui Wang, Minghe Zhang, Lin Zhao, Ying Gao

    A high level of Fe impurity restricts the sustainable recycling and wide application of recycled aluminum alloys. Optimizing the phase selection to favor less harmful Fe-containing intermetallics is a critical strategy to develop high-performance alloys with high Fe-level contamination. To reveal the intrinsic mechanism of Fe-containing intermetallic transformation in Al-Si-Fe alloys, the thermodynamic stability, thermal properties, elastic properties, and electronic structure evolution of θ-Al13Fe4, α-Al7.1Fe2Si, β-Al9Fe2Si2, and δ-Al3FeSi2 phases were systematically investigated by first-principles calculations. The calculated formation energy and binding energy of θ-Al13Fe4, α-Al7.1Fe2Si, β-Al9Fe2Si2 and δ-Al3FeSi2 are −0.28 eV/atom, −0.41 eV/atom, −0.57 eV/atom, −1.92 eV/atom and −4.95 eV/atom, −5.14 eV/atom, −5.35 eV/atom and −6.7 eV/atom, respectively. These results revealed that the thermodynamic stability shows an increasing tendency in the sequence of θ-Al13Fe4, α-Al7.1Fe2Si, β-Al9Fe2Si2 and δ-Al3FeSi2. The calculated Gibbs free energy, enthalpy, entropy, heat capacity, thermal expansion-temperature, and bulk modulus results demonstrated the increased stability in the sequence of θ-Al13Fe4, α-Al7.1Fe2Si, β-Al9Fe2Si2 and δ-Al3FeSi2 phases. These calculated thermal properties validated the phase transformation behaviors. Finally, the enhanced stability and increased modulus values of the δ-Al3FeSi2 phase is attributed to the stronger Si-Fe covalent chemical bonding caused by electron transfer. These findings provide new insight for designing recycled aluminum alloys by optimizing Fe-IMC phase selection and transformation pathways.

  • Open Access

    Influence of α-Al(Mn,Fe)Si Dispersoids and Microalloying on the Localized Corrosion Behavior of Aluminum Alloys

    by Suting Li, Jikang Zhong, Rui Wang, Dongtao Wang, Xiaozu Zhang, Minghe Zhang, Hiromi Nagaumi

    Microstructural heterogeneity plays an important role in the localized corrosion behavior of aluminum alloys. However, the contribution of fine α-Al(Mn,Fe)Si dispersoids remains insufficiently understood. This study investigates how dispersoid characteristics and Cr, Er, and Zr microalloying relate to localized corrosion in industrial-purity Al-based model alloys. Decreasing the total Mn + Si content increased the average dispersoid size by 146% and reduced the number density by 46%, accompanied by a 77% decrease in corrosion current density and a 411% increase in charge-transfer resistance relative to the base alloy. In the studied alloys, surface and cross-sectional observations together with in situ atomic force microscopy (AFM) were qualitatively consistent with suppression of localized corrosion development. Cr, Er, and Zr microalloying further modified dispersoid characteristics and corrosion response, with Cr producing the greatest improvement in electrochemical resistance. The different responses of the Er- and Zr-containing alloys indicate that dispersoid size and number density alone cannot account for the microalloying effect. A two-level interpretation involving dispersoid/matrix interface density and element-dependent interfacial responses is proposed as a working framework, providing a basis for controlling localized corrosion through dispersoid regulation and microalloying.

  • Open Access

    Refining the Fe-Containing IMCs in Al-Fe Alloy Through a Heterogeneous Nucleation Interface for an Enhanced Ductility of Recycled Aluminum Alloys

    by Zhicheng Yin, Xiaozu Zhang, Dongtao Wang, Hiromi Nagaumi, Rui Wang, Minghe Zhang, Lin Zhao, Dongsheng Gao, Ying Gao

    The coarse Fe-containing intermetallics (IMCs) induced by excessive Fe levels seriously degrade the mechanical and corrosion properties of recycled aluminum alloys. Controlling the nucleation and growth behavior has been confirmed as effective in refining the Fe-containing intermetallics (IMCs) and enhancing the ductility of recycled aluminum alloys. In this work, the modification mechanism of Al–Ti–B in Al–2Fe alloy was systematically investigated by combining SEM microstructure, TEM characterization and DFT calculations. TEM observations reveal that TiB2 particles are preferentially embedded within Al13Fe4 phases, forming coherent or semi-coherent interfaces, which act as nucleation sites and facilitate the refinement and uniform distribution of Fe-containing IMCs. Interface property calculation results show that the Al13Fe4 (620)/TiB2 (011-1) interface exhibits lower lattice mismatch (4.4%) and interface energy, indicating stronger interfacial bonding and higher interface stability. The electronic structure results showed that the enhanced interface stability is attribute to the pronounced charge redistribution. Stable interface structure reduces the heterogeneous nucleation barrier and promotes refinement efficiency of Fe-containing ICMs. This study provides theoretical guidance for the refinement of Fe-containing impurity phases and high-performance sustainable recycling of aluminum alloy scrap.

  • Microstructure of Cu-Graphite@Ti2SnC Composites

    by Xiaozu Zhang, Pengfei Zhou, Zhixiu Wang

  • Open Access

    Accelerating the design of highly separable Fe‐containing intermetallics in Al–Si alloys via DFT calculations and experimental validation

    by Xiaozu Zhang, Dongtao Wang, Hiromi Nagaumi, Rui Wang, Zibin Wu, Minghe Zhang, Dongsheng Gao, Hao Chen, Pengfei Wang, Pengfei Zhou, et al.

    The detrimental Fe element in Al‐Si cast alloy can be effectively removed by Fe‐containing intermetallics separation. However, the formation temperature of Fe‐containing intermetallics can be further improved to increase the removal efficiency of Fe element. The effects of the Cr/Mn atomic ratio on the stability, theoretical melting point, elastic modulus, and thermal properties were calculated with the aim of improving the stability of the α‐Al(FeMnCr)Si phase. An increased Cr/Mn atomic ratio effectively increased the stability, theoretical melting point, elastic modulus, isobaric heat capacity, and reduced the volumetric thermal expansion coefficient of α‐Al(FeMnCr)Si phase, which can be explained by the strengthened Al‐Cr and Si‐Cr chemical bonds. The experimental study results revealed that the formation temperature and Young's modulus of the α‐Al(FeMnCr)Si phase increase from 673.0°C and 228.5 GPa to 732.0°C and 272.1 GPa with the Cr/Mn atomic ratio increasing from 0.11 to 0.8, which better validates the thermodynamic stability, theoretical melting point and elastic modulus calculation results. These results provide a new strategy for designing Fe‐containing intermetallics with the desired properties, which contributes to guiding the development of high‐performance recycled Al‐Si alloys.


  • Open Access

    Inhibiting Eutectic Si Macrosegregation in Squeeze Cast A356 Alloy by Symmetrical Multidirectional Pressure

    by Weitao Cai, Xiaozu Zhang, Dongtao Wang, Wenping Weng, Zibin Wu, Hiromi Nagaumi

    The process of symmetrical multidirectional pressure was adopted to inhibit the macrosegregation of eutectic Si in squeeze cast A356 alloy. Five pressure modes were applied to study the effects of multidirectional pressure and the timing of pressure application on the macrosegregation of eutectic Si. The results show that the directional movement of the solute-rich liquid phase could be inhibited by symmetrical multidirectional pressure. Therefore, the macrosegregation of eutectic Si in the casting part was inhibited. Moreover, the timing of pressure application should be matched with the local pressure position. After the effective inhibition of the macrosegregation of eutectic Si, the elongation of the alloy was significantly improved, reaching up to 7.12%. In addition, the plastic deformation region was observed at the local pressure position. The grains in the plastic deformation region were refined. The proportion of low-angle grain boundaries in the deformed region was about 30%, which was much higher than that in the other undeformed region. The size of the Fe-containing intermetallics in the deformed region decreased to 5–10 μm, which is favorable for the mechanical properties of the alloy.