ITIsabella Tavernaro

Isabella Tavernaro

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Isabella Tavernaro has a total of 47 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Making surface-functionalized nanoscale candidate reference and test materials for interlaboratory comparisons involving multi-method studies

    by Isabella Tavernaro, Sarah-Luise Abram, Lena Scholtz, Maria Richter, Anna Matiushkina, Klas Meyer, Peter Sjövall, Mikael Sundin, Mikael Järn, Jernej Ekar, et al.

    The reliable characterization of engineered nanomaterials (NMs) and nano-enabled advanced materials (NAMs) requires validated analytical methods for measuring key properties such as size, size distribution, morphology, chemical composition, and surface chemistry. Establishing such methods and verifying instrument performance and measurement competence requires (certified) reference materials (CRMs/RMs), representative test materials (RTMs), reference data (RD), and interlaboratory comparisons (ILCs). Although several nanoscale size standards exist, no RMs/RTMs with well-defined surface chemistry are available, despite the critical role of surface functional groups (FGs), ligands, and coatings in NM functionality and safety. Here, we report the development and characterization of two surface-modified nanoscale candidate RTMs, SiO2-50-NH2 and SiO2-80-NH2, comprising nonporous silica nanoparticles with total amino FG amounts of 205.7 ± 4.8 and 103.2 ± 3.0 nmol mg⁻1, respectively. Material selection, bottling, homogeneity, and stability were assessed using a previously established multi-method characterization strategy. Analytical techniques included dynamic light scattering (DLS), nanoparticle tracking analysis (NTA), zeta potential measurements, electron microscopy (EM), an automated optical Fluram assay, and quantitative nuclear magnetic resonance spectroscopy (qNMR) for determining derivatizable and total amino FGs. The results highlight the importance of combining complementary analytical methods rather than relying on a single technique. Additionally, a set of aminated silica NMs with varying amino FG densities were used to calibrate X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS), enabling amino FG quantification and method correlation. This characterization concept represents a first step towards establishing RMs/RTMs for NM surface chemistry measurements and ILCs assessing suitable analytical methods and their performance. Graphical Abstract

  • Open Access

    Validated workflows for preparing and characterizing core-stained and surface-labeled fluorescent polymer particles with simple commercial automation tools

    by Abdelouahad El Abbassi, Paul Fürstenwerth, Christian Würth, Isabella Tavernaro, Ute Resch-Genger

    Preparation workflows of fluorescent nm- and µm-sized polymer particles used as reporters in fluorescent assays, bioimaging, and sensing studies or calibration tools for fluorescence methods in the life sciences can be time-consuming and labor-intensive. Also, the outcome can be operator dependent. Here, we present simple and cost-efficient automated workflows for dye loading and surface labeling of polystyrene particles (PSP), using a commercial self-programmable pipetting robot. For developing and fine-tuning automated staining workflows, hydrophobic Nile Red (NR) was incorporated into 100 nm, 200 nm, and 1000 nm PSP by an adapted swelling procedure of premanufactured particles in the presence of hydrophobic dyes, thereby confirming its reliability and versatility. Subsequent expansion of our automation concept to the labeling of carboxylated PSP with pH-sensitive 6-aminofluorescein (6-AMF) and aminated PSP with pH-responsive fluorescein isocyanate (FITC) demonstrated its broad applicability. All automated workflows were optimized and validated by gravimetry and spectroscopic measurements with a microtiter plate (MTP) reader in absorption and fluorescence mode to ensure particle recovery and reproducible fluorescence features and determine PSP dye loading and labeling efficiencies. Comparison with the manual fabrication of NR-stained PSP using an established swelling protocol showed that our automation approach utilizing a pipetting robot considerably reduced the variability in particle recovery and dye loading efficiency. Overall, our simple, labor- and time-efficient workflows with inexpensive and broadly available commercial automation tools present attractive alternatives to manual particle loading and labeling and provide the basis for fast parameter screening, parallel processing, and decreased hands-on time. Graphical Abstract

  • Open Access

    Cross-validation of analytical methods for citrate ligand quantification on upconversion and iron oxide nanoparticles

    by Anna Matiushkina, Sven Brehme, Isabella Tavernaro, Elina Andresen, Sarah-Luise Abram, Matthias Koch, Ute Resch-Genger

    Analysis of nanomaterial (NM) surface chemistry is essential for understanding and controlling NM properties relevant for NM functionality, stability, and safety. In this work, we present a multimethod study of the quantification of the frequently used, biocompatible surface ligand citrate for lanthanide-based upconversion nanoparticles (UCNPs) and iron oxide nanoparticles (IONPs). Methods applied that address different yet correlated measurands with varying chemo-selectivity and rely on different sample preparation workflows include chemo-selective reversed-phase high-performance liquid chromatography (RP-HPLC) with photometric detection measuring liquid samples and dissolved NMs as well as non-selective thermogravimetric analysis (TGA) and chemo-selective pyrolysis-gas chromatography-mass spectrometry (PyGC-MS) analyzing dried NMs. Thereby, we demonstrate the applicability of the RP-HPLC method, recently developed for citrate quantification on IONPs, for UCNPs as another application-relevant NM class. In addition, the feasibility of PyGC-MS, emerging for material characterization at the trace level due to the consumption of very small sample amounts and minimum sample preparation, for NM ligand quantification is assessed. This method, which has not been applied before for NM surface analysis, indirectly quantifies citrate via the amount of acetone formed during citrate decomposition. For UCNPs, PyGC-MS measurements led to a good agreement with the TGA and RP-HPLC results within the respective measurement uncertainties. However, quantifying citrate on IONPs with PyGC-MS resulted in an overestimation of citrate, which is tentatively ascribed to IONP catalytic activity. Overall, our method cross-comparison underlines the importance of multimethod characterization schemes to assure a reliable and precise ligand quantification and to identify method- and NM-specific effects. Graphical abstract


  • Open Access

    ZIF-8-based biocomposites via reactive extrusion: towards industrial-scale manufacturing

    by Nikita Gugin, Alexander Schwab, Francesco Carraro, Isabella Tavernaro, Jana Falkenhagen, José Antonio Villajos, Paolo Falcaro, Franziska Emmerling

    Twin-screw extrusion, a continuous mechanochemical approach, enables one-step solid-state production and shaping of ZIF-8-based biocomposites for biomedical applications.


  • Open Access

    Quantification of the amount of surface groups of aminated silica nano- and microparticles utilizing a fluorine tag and HR-CS-GFMAS

    by Isabella Tavernaro, Fabian Simon, Lennart Gehrenkemper, Charlie Tobias, Ute Resch-Genger, Björn Meermann

    The performance, bioavailability, and safe use of engineered nanomaterials (NMs) depends not only on properties such as size, shape, and surface area, but largely on surface chemistry. While many sizing methods have been established, there is still a lack of validated screening methods for determining NM surface functional groups (FGs). In this context, we present a fast and simple method for FG quantification using high resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) and assess its applicability for the surface analysis of representatively chosen aminated silica nanoparticles (NPs) and microparticles (MPs) in conjunction with amino FG labeling with a fluorine tag. For this proof-of-concept study, first surface amino FG screening of the silica NPs and MPs was done with a potentiometric back titration method, providing the total amount of protonatable surface FGs, and two optical assays relying on reporter dyes with sizes and spatial requirements, i.e., surface binding areas smaller or larger than that of the fluorine tag to estimate the maximum and reporter-accessible number of amino FGs. Subsequently, the surface amino FGs were labeled with the fluorine tag 4-(trifluoromethyl)benzoic acid (TFMB) and the amount of fluorine originating from the bound TFMB molecules was quantified by HR-CS-GFMAS in two common organic solvents, i.e., dimethyl sulfoxide (DMSO) or ethanol (EtOH) to assess possible interferences from organic matrices. Our study revealed limits of detection (LODs) and quantification (LOQs) for fluorine of 1.0 µg/L and 3.5 µg/L in EtOH and 1.5 µg/L and 5.0 µg/L in DMSO, respectively. Overall, a quick and simple method for analyzing surface FGs on NPs and MPs was presented utilizing broadly available fluorine tags and HR-CS-GFMAS for fluorine quantification, which can be applied, e.g., for homogeneity, stability, and aging studies of surface-modified particles. This could contribute to ease the understanding of property-safety relationships for surface-functionalized NMs. Graphical Abstract


  • Open Access

    Quantifying surface groups on aminated silica nanoparticles of different size, surface chemistry, and porosity with solution NMR, XPS, optical assays, and potentiometric titration

    by Isabella Tavernaro, Isabelle Rajotte, Marie-Pier Thibeault, Philipp C. Sander, Oltion Kodra, Gregory Lopinski, Jörg Radnik, Linda J. Johnston, Andreas Brinkmann, Ute Resch-Genger

    BAM and NRC quantified surface amino functional groups (FGs) on 20–100 nm commercial and custom-made silica nanoparticles (SiO2 NPs), made with different sol–gel routes, amounts of surface amino FGs, and porosity in a bilateral multi-method study.


  • Open Access

    Expanding the Toolbox of Simple, Cost-Efficient, and Automatable Methods for Quantifying Surface Functional Groups on Nanoparticles─Potentiometric Titration

    by Isabella Tavernaro, Philipp C. Sander, Elina Andresen, Uwe Schedler, Ute Resch-Genger

    Measuring surface functional groups (FGs) on nanomaterials (NMs) is essential for designing dispersible and stable NMs with tailored and predictable functionality. FG screening and quantification also plays a critical role for subsequent processing steps, NM long-term stability, quality control of NM production, and risk assessment studies and enables the implementation of sustainable and safe-(r)-by-design concepts. This calls for simple and cost-efficient methods for broadly utilized FGs that can be ideally automated to speed up FG screening, monitoring, and quantification. To expand our NM surface analysis toolbox, focusing on simple methods and broadly available, cost-efficient instrumentation, we explored a NM-adapted pH titration method with potentiometric and optical readout for measuring the total number of (de)-protonable FGs on representatively chosen commercial and custom-made aminated silica nanoparticles (SiO2 NPs). The accuracy and robustness of our stepwise optimized workflows was assessed by several operators in two laboratories and method validation was done by cross-comparison with two analytical methods relying on different signal generation principles. This included traceable, chemo-selective quantitative nuclear magnetic resonance spectroscopy (qNMR) and thermogravimetric analysis (TGA), providing the amounts of amino silanes released by particle dissolution and the total mass of the surface coatings. A comparison of the potentiometric titration results with the reporter-specific amounts of surface amino FGs determined with the previously automated fluorescamine (Fluram) assay highlights the importance of determining both quantities for surface-functionalized NMs. In the future, combined NM surface analysis with optical assays and pH titration will simplify quality control of NM production processes and stability studies and can yield large data sets for NM grouping that facilitates further developments in regulation and standardization.


  • Open Access

    ZIF-8-Based Biocomposites via Reactive Extrusion: Towards Industrial-Scale Manufacturing

    by Nikita Gugin, Alexander Schwab, Francesco Carraro, Isabella Tavernaro, Jana Falkenhagen, José Antonio Villajos, Paolo Falcaro, Franziska Emmerling

    Mechanochemistry, a sustainable synthetic method that minimizes solvent use, has shown great promise in producing metal-organic framework (MOF)-based biocomposites through ball milling. While ball milling offers fast reaction times, biocompatible conditions, and access to previously unattainable biocomposites, it is a batch-type process typically limited to gram-scale production, which is insufficient to meet commercial capacity. We introduce a scalable approach for the continuous solid-state production of MOF-based biocomposites. Our study commences with model batch reactions to examine the encapsulation of various biomolecules into Zeolitic Imidazolate Framework-8 (ZIF-8) via hand mixing, establishing a foundation for upscaling. Subsequently, the process is scaled up using reactive extrusion, enabling continuous and reproducible kilogram-scale production of bovine serum albumin (BSA) @ZIF-8 with tunable protein loading. Furthermore, we achieve the one-step formation of shaped ZIF-8 monoliths encapsulating clinical therapeutic hyaluronic acid (HA). Upon release of HA from the composite, the molecular weight of HA is preserved, highlighting the industrial potential of reactive extrusion for the cost-effective and reliable manufacturing of biocomposites for drug-delivery applications.

  • Open Access

    Complete protection of NIR-luminescent molecular rubies from oxygen quenching in air by L-arginine-mediated silica nanoparticles

    by Viktoriia Osipova, Isabella Tavernaro, Lingcong Ge, Winald R. Kitzmann, Katja Heinze, Michael R. Reithofer, Ute Resch-Genger

    The application of emerging luminophores such as near-infrared (NIR) emissive earth-abundant chromium(III) (CrIII) complexes and triplet- triplet annihilation upconversion (TTA-UC) systems in air as optical reporters for bioimaging or photonic materials for energy conversion requires simple and efficient strategies for their complete protection from luminescence quenching by oxygen. Therefore, we explored the influence of sol-gel synthesis routes on the oxygen protection efficiency of the resulting core and core/shell silica nanoparticles (SiO2 NPs), utilizing the molecular ruby-type luminophores CrPF6 ([Cr(ddpd)2](PF6)3; ddpd = N,N’-dimethyl-N,N’-dipyridin-2-ylpyridin-2,6-diamine) and CrBF4 ([Cr(ddpd)2](BF4)3) with their oxygen-dependent, but polarity-, proticity-, viscosity-, and concentration-independent luminescence as optical probes for oxygen permeability. The sol-gel chemistry routes we assessed include the classical Stöber method and the underexplored L-arginine approach, which relies on the controlled hydrolysis of tetraethoxysilane (TEOS) in a biphasic cyclohexane/water system with the catalyst L-arginine. As demonstrated by luminescence measurements of air- and argon-saturated dispersions of CrPF6- and CrBF4-stained SiO2 NPs of different size and particle architecture, utilizing the luminescence decay kinetics of argon-saturated solutions of CrPF6 and CrBF4 in acetonitrile (ACN) as benchmarks, only SiO2 NPs or shells synthesized by the L-arginine approach provided complete oxygen protection of the CrIII complexes under ambient conditions. We ascribe the different oxygen shielding efficiencies of the silica networks explored to differences in density and surface chemistry of the resulting nanomaterials and coatings, leading to different oxygen permeabilities. Our L-arginine based silica encapsulation strategy can open the door for the efficient usage of oxygen-sensitive luminophores and TTA-UC systems as optical reporters and spectral shifters in air in the future.


  • Exploring the potential of simple automation concepts for quantifying functional groups on nanomaterials with optical assays

    by Isabella Tavernaro, Anna Matiushkina, Kai Simon Rother, Celina Mating, Ute Resch-Genger

    Until now, automation in nanomaterial research has been largely focused on the automated synthesis of engineered nanoparticles (NPs) including the screening of synthesis parameters and the automation of characterization methods such as electron microscopy. Despite the rapidly increasing number of NP samples analyzed due to increasing requirements on NP quality control, increasing safety concerns, and regulatory requirements, automation has not yet been introduced into workflows of analytical methods utilized for screening, monitoring, and quantifying functional groups (FGs) on NPs. To address this gap, we studied the potential of simple automation tools for the quantification of amino surface groups on different types of aminated NPs, varying in size, chemical composition, and optical properties, with the exemplarily chosen sensitive optical fluorescamine (Fluram) assay. This broadly applied, but reportedly error-prone assay, which utilizes a chromogenic reporter, involves multiple pipetting and dilution steps and photometric or fluorometric detection. In this study, we compared the influence of automated and manual pipetting on the results of this assay, which was automatically read out with a microplate reader. Special emphasis was dedicated to parameters like accuracy, consistency, achievable uncertainties, and speed of analysis and to possible interferences from the NPs. Our results highlight the advantages of automated surface FG quantification and the huge potential of automation for nanotechnology. In the future, this will facilitate process and quality control of NP fabrication, surface modification, and stability monitoring and help to produce large data sets for nanomaterial grouping approaches for sustainable and safe-by-design, performance, and risk assessment studies.