Wei-Guo Pan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wei-Guo Pan has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Rui-Tang Guo
School of Energy Source and Mechanical Engineering, Shanghai University of Electric Power, Shanghai, People’s Republic of China
3 shared publications - Ting Yan
College of Energy and Mechanical Engineering Shanghai University of Electric Power Shanghai China
2 shared publications Cheng‐Xiang Zhou
College of Energy Source and Mechanical Engineering Shanghai University of Electric Power Shanghai P. R. China
1 shared publicationChu-Fan Li
College of Energy Source and Mechanical Engineering, Shanghai University of Electric Power, Shanghai, 200090, People's Republic of China
1 shared publicationFeiyi Zhou
State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou, China
1 shared publicationGuiqing Bai
School of Energy and Power Engineering, University of Shanghai for Science and Technology, Shanghai, China
1 shared publication
Latest Publications
- Open Access
- 21 August 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 9985
Low-coordinated CuNi dual-atom catalyst for efficient flue gas CO2-to-C2H6 photoreduction
Efficient photoreduction of flue gas CO2 to high-value C2 products is challenging due to low CO2 concentrations, sluggish kinetics, and susceptibility to catalyst poisoning. To tackle this, CuNi/PCN photocatalysts with low-coordinated N3-Ni-Cu-N2 dual-atom active sites were synthesized by in-situ thermal polymerization method. The optimized catalyst drives CO2 photoreduction, with C2H6 formed as the major product at a rate of 254.3 μmol h−1 g−1 alongside CO and CH4. Notably, it retains ~50% yield with ~63% electron selectivity of C2H6 under 15% diluted CO2 and exhibits robust anti-poisoning capability and stability in complex flue gas. Integrated studies reveal that low coordinated CuNi dual-atom sites synergistically modulates active site electronics, enhancing CO2 adsorption and lowering barriers for C-C coupling to form C2H6. The formed Cu-Ni bonds further reinforce the catalyst’s structural and photocatalytic stability. Overall, this work offers a promising strategy for efficient solar C2 production from industrial exhaust gases.
- 21 August 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 9985
Open AccessLow-coordinated CuNi dual-atom catalyst for efficient flue gas CO2-to-C2H6 photoreduction
Efficient photoreduction of flue gas CO2 to high-value C2 products is challenging due to low CO2 concentrations, sluggish kinetics, and susceptibility to catalyst poisoning. To tackle this, CuNi/PCN photocatalysts with low-coordinated N3-Ni-Cu-N2 dual-atom active sites were synthesized by in-situ thermal polymerization method. The optimized catalyst drives CO2 photoreduction, with C2H6 formed as the major product at a rate of 254.3 μmol h−1 g−1 alongside CO and CH4. Notably, it retains ~50% yield with ~63% electron selectivity of C2H6 under 15% diluted CO2 and exhibits robust anti-poisoning capability and stability in complex flue gas. Integrated studies reveal that low coordinated CuNi dual-atom sites synergistically modulates active site electronics, enhancing CO2 adsorption and lowering barriers for C-C coupling to form C2H6. The formed Cu-Ni bonds further reinforce the catalyst’s structural and photocatalytic stability. Overall, this work offers a promising strategy for efficient solar C2 production from industrial exhaust gases.
- Open Access
- 4 June 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (11) , e70749
BiVO 4 ‐Based Photoanodes for Solar Fuel Production: From Bulk Doping to Multiphase Integrated Architectures
Bismuth vanadate (BiVO 4 ) is a promising photoanode for photoelectrochemical (PEC) solar fuel production owing to its visible‐light response and suitable band structure. However, its efficiency is still limited by poor charge mobility, severe bulk/surface recombination, and sluggish interfacial oxidation kinetics. Compared with recent reviews mainly focused on water oxidation or individual modification strategies, this review links defect chemistry, charge‐carrier dynamics, interfacial kinetics, operational stability, and coupled solar fuel production. Particular attention is given to vacancy engineering, advanced transient and in situ characterization, and the integration of BiVO 4 ‐based photoanodes into PEC CO 2 reduction and high‐value chemical synthesis systems. Finally, key challenges related to long‐term stability, scalable fabrication, and practical device integration are discussed, providing guidance for the design of efficient and durable BiVO 4 ‐based photoelectrodes.
- 4 June 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (11) , e70749
Open AccessBiVO 4 ‐Based Photoanodes for Solar Fuel Production: From Bulk Doping to Multiphase Integrated Architectures
Bismuth vanadate (BiVO 4 ) is a promising photoanode for photoelectrochemical (PEC) solar fuel production owing to its visible‐light response and suitable band structure. However, its efficiency is still limited by poor charge mobility, severe bulk/surface recombination, and sluggish interfacial oxidation kinetics. Compared with recent reviews mainly focused on water oxidation or individual modification strategies, this review links defect chemistry, charge‐carrier dynamics, interfacial kinetics, operational stability, and coupled solar fuel production. Particular attention is given to vacancy engineering, advanced transient and in situ characterization, and the integration of BiVO 4 ‐based photoanodes into PEC CO 2 reduction and high‐value chemical synthesis systems. Finally, key challenges related to long‐term stability, scalable fabrication, and practical device integration are discussed, providing guidance for the design of efficient and durable BiVO 4 ‐based photoelectrodes.
Preparation and Photothermal Properties of Accordion‐Like MXene/Sodium Acetate Trihydrate Composite Phase Change Materials
Phase change materials (PCMs) are promising options for thermal energy storage. Combining sodium acetate trihydrate (SAT) with MXene, the composite phase change materials (CPCMs) have been prepared. The surface morphology, thermal storage performance, and solar energy photothermal conversion efficiency of the CPCMs with various MXene contents are analyzed. According to the microstructure morphology analysis, MXene is accordion‐shaped, and tightly associated with SAT. Differential scanning calorimetry measurement results show that CPCMs possess high latent heat and suitable phase change temperature for the applications of solar heat storage. The absorption wavelength range of SAT/MXene is extended from 200–258 nm to 200–497.7 nm with a photothermal conversion efficiency of 81.3%. SAT/MXene‐2%, SAT/MXene‐8%, and SAT/MXene‐14% have thermal conductivities of 0.84, 1.14, and 1.47 W/ (m · K), respectively, which are higher by 44.9%, 96.6%, and 153.4% than 0.59 W/ (m · K) of pure SAT. CPCMs exhibit excellent thermal stability and reliable cycling stability after 50 cycles, which show that MXene can prevent leakage during the solid‐liquid phase transition process. The expansion of PCM's practical applicability and MXene/SAT composites with good photothermal characteristics create a theoretical foundation for the effective use of renewable energy sources.
Preparation and Photothermal Properties of Accordion‐Like MXene/Sodium Acetate Trihydrate Composite Phase Change Materials
Phase change materials (PCMs) are promising options for thermal energy storage. Combining sodium acetate trihydrate (SAT) with MXene, the composite phase change materials (CPCMs) have been prepared. The surface morphology, thermal storage performance, and solar energy photothermal conversion efficiency of the CPCMs with various MXene contents are analyzed. According to the microstructure morphology analysis, MXene is accordion‐shaped, and tightly associated with SAT. Differential scanning calorimetry measurement results show that CPCMs possess high latent heat and suitable phase change temperature for the applications of solar heat storage. The absorption wavelength range of SAT/MXene is extended from 200–258 nm to 200–497.7 nm with a photothermal conversion efficiency of 81.3%. SAT/MXene‐2%, SAT/MXene‐8%, and SAT/MXene‐14% have thermal conductivities of 0.84, 1.14, and 1.47 W/ (m · K), respectively, which are higher by 44.9%, 96.6%, and 153.4% than 0.59 W/ (m · K) of pure SAT. CPCMs exhibit excellent thermal stability and reliable cycling stability after 50 cycles, which show that MXene can prevent leakage during the solid‐liquid phase transition process. The expansion of PCM's practical applicability and MXene/SAT composites with good photothermal characteristics create a theoretical foundation for the effective use of renewable energy sources.
- 15 September 2023
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 52 (40) , 14537-14548
Preparation, thermal storage properties and application of sodium acetate trihydrate/expanded graphite composite phase change materials
The development of energy storage technology is beneficial for the efficient use of energy and sustainable development. As an effectual approach for storing and transporting thermal energy, latent heat storage using phase change materials (PCMs) has attracted tremendous attention. However, low thermal conductivity, poor stability, and leakages are considerable challenges to the widespread application of solid–liquid PCMs. Composite phase change materials (CPCMs) were prepared by combining expanded graphite (EG) and sodium acetate trihydrate (CH3COONa·3H2O, SAT). EG as a supporting material plays a crucial part in both enhancing the thermal conductivity and preventing the melted PCMs from leakage. The chemical structure, micromorphology, thermal stability, thermal conductivity, phase change behavior and heat storage performance of SAT/EG CPCMs have been extensively investigated by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermal conductivity analysis, differential scanning calorimetry (DSC), and cycling stability measurement. The results of SEM indicate that EG with a loose and porous layered structure has a good molding effect and can adsorb SAT well. XRD and FTIR results show that only a simple physical combination between EG and SAT exists, and no new substances have been produced. Compared with pure SAT, thermal conductivity and supercooling tests show that the supercooling degree of the CPCMs was decreased and the thermal conductivity was increased by 205.1%. In addition, the addition of 2 wt% of disodium hydrogen phosphate dodecahydrate (Na2HPO4·12H2O, DHPD) as a nucleating agent and 0.5 wt% of gelatin as a thickening agent to SAT could reduce the supercooling degree and inhibit the phase separation well. Based on SAT/EG-8% CPCMs, an oven with phase change energy storage was designed and the heat storage/release performance of the oven was investigated under different operating conditions.
- 15 September 2023
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 52 (40) , 14537-14548
Preparation, thermal storage properties and application of sodium acetate trihydrate/expanded graphite composite phase change materials
The development of energy storage technology is beneficial for the efficient use of energy and sustainable development. As an effectual approach for storing and transporting thermal energy, latent heat storage using phase change materials (PCMs) has attracted tremendous attention. However, low thermal conductivity, poor stability, and leakages are considerable challenges to the widespread application of solid–liquid PCMs. Composite phase change materials (CPCMs) were prepared by combining expanded graphite (EG) and sodium acetate trihydrate (CH3COONa·3H2O, SAT). EG as a supporting material plays a crucial part in both enhancing the thermal conductivity and preventing the melted PCMs from leakage. The chemical structure, micromorphology, thermal stability, thermal conductivity, phase change behavior and heat storage performance of SAT/EG CPCMs have been extensively investigated by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermal conductivity analysis, differential scanning calorimetry (DSC), and cycling stability measurement. The results of SEM indicate that EG with a loose and porous layered structure has a good molding effect and can adsorb SAT well. XRD and FTIR results show that only a simple physical combination between EG and SAT exists, and no new substances have been produced. Compared with pure SAT, thermal conductivity and supercooling tests show that the supercooling degree of the CPCMs was decreased and the thermal conductivity was increased by 205.1%. In addition, the addition of 2 wt% of disodium hydrogen phosphate dodecahydrate (Na2HPO4·12H2O, DHPD) as a nucleating agent and 0.5 wt% of gelatin as a thickening agent to SAT could reduce the supercooling degree and inhibit the phase separation well. Based on SAT/EG-8% CPCMs, an oven with phase change energy storage was designed and the heat storage/release performance of the oven was investigated under different operating conditions.
- 15 May 2023
- Published by Elsevier in Chemosphere
- Vol. 333, 138942
Recent advances in core-shell structured catalysts for low-temperature NH3-SCR of NOx
- 15 May 2023
- Published by Elsevier in Chemosphere
- Vol. 333, 138942
Recent advances in core-shell structured catalysts for low-temperature NH3-SCR of NOx