Mahmood Haris
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mahmood Haris has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Ergang Xiong
School of Civil Engineering, Chang’an University, Xi’an 710061, China
4 shared publications - Mabor Achol Samuel
School of Civil Engineering, Chang’an University, Xi’an 710061, China
3 shared publications - Beco Chenadaire Lekeufack
School of Civil Engineering, Chang’an University, 75 Chang’an Road, Xi’an 710061, China
2 shared publications - Yufei Han
School of Civil Engineering, Chang’an University, Xi’an 710061, China
2 shared publications - Yupeng Xie
School of Civil Engineering, Chang’an University, Xi’an 710061, China
2 shared publications - Anwar Saleem
School of Civil Engineering, Chang’an University, Xi’an 710061, China
1 shared publication
Latest Publications
- Open Access
Enhancing Construction Efficiency and Structural Integrity of Ambient-Cured UHPC Incorporating Sulfoaluminate Cement Through Liquid Superplasticizer Optimization
The addition of sulfoaluminate cement (SAC) to ultra-high-performance concrete (UHPC) enables sustainable high-speed construction due to the high 7-day strength without thermal curing. The fast hydration of SAC, however, endangers the admixture efficacy, which may compromise the structural integrity of the infrastructure components. This study investigates the effect of the physical form of polycarboxylate ether (PCE) superplasticizers on the performance of UHPC with the incorporation of SAC in ambient conditions. A paired experimental design of 32 mixtures compared liquid superplasticizers (LSPs) and powder superplasticizers (PSPs) in various binder compositions (OPC/SAC of 1/4–4/1) and water-to-binder ratios (0.18–0.21) at a constant dosage of admixtures of 1% except where w/b 0.18 (1.5% superplasticizers and 1% retarders were used). Findings indicate that LSPs enhance workability and compressive strength by 45% and 10.03%, respectively. The underlying mechanism is explained by comprehensive microstructural characterization through the use of Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) spectroscopy. SEM study showed a 23% decrease in porosity, and XRD patterns showed the increased formation of amorphous C-S-H gel for LSPs. The higher levels of Al3+ incorporated into the gel structure (C-A-S-H) of the liquid forms was also verified by FTIR spectra. Mechanically, the research reveals one of the kinetic mismatches, where the rate of SAC hydration is greater than the rate of powder dissolution, which leads to a failure to fully disperse and shear-controlled failures. LSPs, in contrast, make it possible to disperse particles immediately, so the matrices become more dense and shift to axial failure. These results provide practical guidelines to infrastructure engineers to use liquid superplasticizer in SAC-based systems in order to achieve sustainability and reliability in terms of performance in precast and fast-track construction projects.
Open AccessEnhancing Construction Efficiency and Structural Integrity of Ambient-Cured UHPC Incorporating Sulfoaluminate Cement Through Liquid Superplasticizer Optimization
The addition of sulfoaluminate cement (SAC) to ultra-high-performance concrete (UHPC) enables sustainable high-speed construction due to the high 7-day strength without thermal curing. The fast hydration of SAC, however, endangers the admixture efficacy, which may compromise the structural integrity of the infrastructure components. This study investigates the effect of the physical form of polycarboxylate ether (PCE) superplasticizers on the performance of UHPC with the incorporation of SAC in ambient conditions. A paired experimental design of 32 mixtures compared liquid superplasticizers (LSPs) and powder superplasticizers (PSPs) in various binder compositions (OPC/SAC of 1/4–4/1) and water-to-binder ratios (0.18–0.21) at a constant dosage of admixtures of 1% except where w/b 0.18 (1.5% superplasticizers and 1% retarders were used). Findings indicate that LSPs enhance workability and compressive strength by 45% and 10.03%, respectively. The underlying mechanism is explained by comprehensive microstructural characterization through the use of Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) spectroscopy. SEM study showed a 23% decrease in porosity, and XRD patterns showed the increased formation of amorphous C-S-H gel for LSPs. The higher levels of Al3+ incorporated into the gel structure (C-A-S-H) of the liquid forms was also verified by FTIR spectra. Mechanically, the research reveals one of the kinetic mismatches, where the rate of SAC hydration is greater than the rate of powder dissolution, which leads to a failure to fully disperse and shear-controlled failures. LSPs, in contrast, make it possible to disperse particles immediately, so the matrices become more dense and shift to axial failure. These results provide practical guidelines to infrastructure engineers to use liquid superplasticizer in SAC-based systems in order to achieve sustainability and reliability in terms of performance in precast and fast-track construction projects.
- Open Access
Strengthening Reinforced Concrete Members Using FRP—Evaluating Fire Performance, Challenges, and Future Research Directions: A State-of-the-Art Review
Fiber-reinforced polymer (FRP) composites are increasingly used in civil engineering for strengthening and repairing existing reinforced concrete (RC) members using externally bonded reinforcement (EBR) and near-surface mounted (NSM) methods. However, the fire performance of FRP-strengthened RC members has been an important issue that should be properly considered in the fire safety design process since FRP composites exhibit significant performance degradation at elevated temperatures. This paper aims to review studies on the fire performance of FRP-strengthened RC members based on the existing research results presented in the literature to provide a comprehensive understanding of key factors influencing the structural behavior of FRP-strengthened RC members under fire conditions. It provides an overview of FRP composite material properties, such as their mechanical and thermal behavior and bond characteristics between FRP-to-concrete interfaces at elevated temperatures. Additionally, this paper reviews experimental and numerical research conducted on FRP-strengthened RC members, examining load-carrying capacities and fire endurance ratings. Finally, this review will provide existing fire resistance design methods as well as simple design methods for temperature prediction.
Open AccessStrengthening Reinforced Concrete Members Using FRP—Evaluating Fire Performance, Challenges, and Future Research Directions: A State-of-the-Art Review
Fiber-reinforced polymer (FRP) composites are increasingly used in civil engineering for strengthening and repairing existing reinforced concrete (RC) members using externally bonded reinforcement (EBR) and near-surface mounted (NSM) methods. However, the fire performance of FRP-strengthened RC members has been an important issue that should be properly considered in the fire safety design process since FRP composites exhibit significant performance degradation at elevated temperatures. This paper aims to review studies on the fire performance of FRP-strengthened RC members based on the existing research results presented in the literature to provide a comprehensive understanding of key factors influencing the structural behavior of FRP-strengthened RC members under fire conditions. It provides an overview of FRP composite material properties, such as their mechanical and thermal behavior and bond characteristics between FRP-to-concrete interfaces at elevated temperatures. Additionally, this paper reviews experimental and numerical research conducted on FRP-strengthened RC members, examining load-carrying capacities and fire endurance ratings. Finally, this review will provide existing fire resistance design methods as well as simple design methods for temperature prediction.
- Open Access
- 27 November 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (23) , 10392
Assessing Seismic Vulnerability Methods for RC-Frame Buildings Pre- and Post-Earthquake
The seismic vulnerability of reinforced concrete (RC) buildings has been an important issue, especially in earthquake-prone regions with limited seismic design codes such as South Sudan. Improving the seismic performance of reinforced concrete buildings is critical for maintaining structural functionality under normal service loads and for rapid recovery after natural disasters such as earthquakes. This research aims to thoroughly assess the methods used to evaluate the seismic vulnerability of RC frame structures in pre- and post-earthquake scenarios. The primary objective is to provide a comprehensive framework that integrates empirical, analytical, and experimental methods, categorizing existing assessment methods and proposing improvements for resource-constrained environments. However, empirical methods have always used historical earthquake data to estimate potential damage. In contrast, analytical methods have used computational tools such as fragility curves to assess the probability of damage at different seismic intensities. Additionally, experimental methods, such as shaking table tests and pseudo-dynamic analyses, have validated theoretical predictions and provided insights into structural behavior under simulated conditions. Furthermore, key findings highlight critical vulnerabilities in RC buildings, quantify damage probabilities, and compare the strengths and limitations of different assessment methods. However, challenges such as limited data availability, computational limitations, and difficulties replicating actual conditions in test setups highlight areas for improvement. By addressing these challenges, the review provides recommendations for future studies, including integrating advanced computational and regional hazard characterization methods, improving experimental methods to enhance the accuracy of vulnerability assessments, and ultimately supporting the design of more resilient RC structures and increasing disaster preparedness.
- 27 November 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (23) , 10392
Open AccessAssessing Seismic Vulnerability Methods for RC-Frame Buildings Pre- and Post-Earthquake
The seismic vulnerability of reinforced concrete (RC) buildings has been an important issue, especially in earthquake-prone regions with limited seismic design codes such as South Sudan. Improving the seismic performance of reinforced concrete buildings is critical for maintaining structural functionality under normal service loads and for rapid recovery after natural disasters such as earthquakes. This research aims to thoroughly assess the methods used to evaluate the seismic vulnerability of RC frame structures in pre- and post-earthquake scenarios. The primary objective is to provide a comprehensive framework that integrates empirical, analytical, and experimental methods, categorizing existing assessment methods and proposing improvements for resource-constrained environments. However, empirical methods have always used historical earthquake data to estimate potential damage. In contrast, analytical methods have used computational tools such as fragility curves to assess the probability of damage at different seismic intensities. Additionally, experimental methods, such as shaking table tests and pseudo-dynamic analyses, have validated theoretical predictions and provided insights into structural behavior under simulated conditions. Furthermore, key findings highlight critical vulnerabilities in RC buildings, quantify damage probabilities, and compare the strengths and limitations of different assessment methods. However, challenges such as limited data availability, computational limitations, and difficulties replicating actual conditions in test setups highlight areas for improvement. By addressing these challenges, the review provides recommendations for future studies, including integrating advanced computational and regional hazard characterization methods, improving experimental methods to enhance the accuracy of vulnerability assessments, and ultimately supporting the design of more resilient RC structures and increasing disaster preparedness.
- Open Access
- 16 September 2024
- Published by MDPI AG in Preprints.org
Assessing Seismic Vulnerability Methods for RC-Frame Buildings in Pre- and Post-Earthquake
In metropolitan regions, which are particularly vulnerable to seismic damage, numerous reinforced concrete (RC) buildings are being constructed. Public safety has been an important consideration to safeguard and protect people, buildings, and infrastructure from the potential effects of earthquakes. The assessment of seismic vulnerability within urban areas encompassed an analysis of both building vulnerability and the scale of seismic hazards prevalent in the locality. This assessment aimed to ascertain the likelihood of building damage resulting from ground motion induced by an earthquake of a specific magnitude. In recent decades, considerable efforts have been made to develop and improve methods for assessing earthquake damage to reinforced concrete (RC) buildings. These efforts included the creation of seismic hazard and seismic risk indices that were used to quantify the potential destruction of individual building components or the entire building. This scholarly review article presents an in-depth analysis and concise summary of the primary techniques (including qualitative or empirical, quantitative, analytical, and experimental test methods) devised for appraising the seismic vulnerability of reinforced concrete frame buildings, pre- and post-earthquake occurrences. It is a valuable reference for policymakers, engineers, researchers, and specialists engaged in earthquake risk mitigation efforts.
- 16 September 2024
- Published by MDPI AG in Preprints.org
Open AccessAssessing Seismic Vulnerability Methods for RC-Frame Buildings in Pre- and Post-Earthquake
In metropolitan regions, which are particularly vulnerable to seismic damage, numerous reinforced concrete (RC) buildings are being constructed. Public safety has been an important consideration to safeguard and protect people, buildings, and infrastructure from the potential effects of earthquakes. The assessment of seismic vulnerability within urban areas encompassed an analysis of both building vulnerability and the scale of seismic hazards prevalent in the locality. This assessment aimed to ascertain the likelihood of building damage resulting from ground motion induced by an earthquake of a specific magnitude. In recent decades, considerable efforts have been made to develop and improve methods for assessing earthquake damage to reinforced concrete (RC) buildings. These efforts included the creation of seismic hazard and seismic risk indices that were used to quantify the potential destruction of individual building components or the entire building. This scholarly review article presents an in-depth analysis and concise summary of the primary techniques (including qualitative or empirical, quantitative, analytical, and experimental test methods) devised for appraising the seismic vulnerability of reinforced concrete frame buildings, pre- and post-earthquake occurrences. It is a valuable reference for policymakers, engineers, researchers, and specialists engaged in earthquake risk mitigation efforts.