Farida Issatayeva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Farida Issatayeva has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Auez Egemberdyevich Abetov
Satbayev University
2 shared publications - Gulzada Umirova
Satbayev University
2 shared publications - Aigerim Abdullina
Department of Development of Mineral Deposits, Karaganda Technical University, Karaganda 100000, Kazakhstan
1 shared publication - Aigerim Abdullina
Karaganda Technical University, Department of Development of mineral deposits, Karaganda, Republic of Kazakhstan Kazakhstan
1 shared publication Andrey Kan
Kazakhmys Corporation LLC, Kazakhstan
1 shared publicationG. K. Umirova
1 shared publication
Latest Publications
- 25 July 2025
- Published by Ore and Metals Publishing House in Eurasian Mining
- p. 12-18
Integrated geological interpretation of geophysical data based on 2.5D volumetric modeling
The relevance of the research is based on the need to enhance the efficiency of geophysical work in the search for zones of sulfide mineralization in the Northwestern Balkhash region, Kazakhstan. The aim of the study is to analyze, summarize and interpret geological and geophysical materials in order to identify promising areas. A comprehensive set of geological and geophysical methods has been applied, including high-precision gravity and magnetic surveys as well as electrical exploration. As a result of 2.5D volume modeling, taking into account various prerequisites and signs of mineralization, we have identified geological and geophysical criteria for detecting gold mineralization. It has been found that ore mineralization is associated with two types of deposits: terrigenous deposits of carbonates and terrigenous rock masses of the Famennian stage of the Upper Devonian. Geophysical criteria for distinguishing ore zones have been defined for these areas. It is found that non-ore areas show a widespread increase in all parameters of geophysical fields. The conducted research allows forecasting supplementary gold mineralization zones, facilitating future geological exploration for gold and associated metals. The study was conducted within the framework of the State Grant: Improving the Geological and Economic Assessment of Mining and Metallurgical Enterprises in the Context of Their Compliance with International Trends and Digital Reform (2022–2024), Grant No. AP14872003.The research was supported by the Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan under Grant Agreement No. AP14872003.
- 25 July 2025
- Published by Ore and Metals Publishing House in Eurasian Mining
- p. 12-18
Integrated geological interpretation of geophysical data based on 2.5D volumetric modeling
The relevance of the research is based on the need to enhance the efficiency of geophysical work in the search for zones of sulfide mineralization in the Northwestern Balkhash region, Kazakhstan. The aim of the study is to analyze, summarize and interpret geological and geophysical materials in order to identify promising areas. A comprehensive set of geological and geophysical methods has been applied, including high-precision gravity and magnetic surveys as well as electrical exploration. As a result of 2.5D volume modeling, taking into account various prerequisites and signs of mineralization, we have identified geological and geophysical criteria for detecting gold mineralization. It has been found that ore mineralization is associated with two types of deposits: terrigenous deposits of carbonates and terrigenous rock masses of the Famennian stage of the Upper Devonian. Geophysical criteria for distinguishing ore zones have been defined for these areas. It is found that non-ore areas show a widespread increase in all parameters of geophysical fields. The conducted research allows forecasting supplementary gold mineralization zones, facilitating future geological exploration for gold and associated metals. The study was conducted within the framework of the State Grant: Improving the Geological and Economic Assessment of Mining and Metallurgical Enterprises in the Context of Their Compliance with International Trends and Digital Reform (2022–2024), Grant No. AP14872003.The research was supported by the Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan under Grant Agreement No. AP14872003.
- Open Access
- 22 May 2025
- Published by MDPI AG in Geosciences
- Vol. 15 (6) , 190
The Roles of Transcrustal Magma- and Fluid-Conducting Faults in the Formation of Mineral Deposits
In this article, we consider the roles of transcrustal magma- and fluid-conducting faults (TCMFCFs) in the formation of mineral deposits, showing the importance of deep sources of heat and hydrothermal solutions in the genesis and history of deposit formation. As a result of the impact on the lithosphere of mantle plumes rising along TCMFCFs, intense block deformations and tectonic movements are generated; rift systems, and volcanic–plutonic belts spatially combined with them, are formed; and intrusive bodies are introduced. These processes cause epithermal ore formation as a consequence of the impact of mantle plumes rising along TCMFCF to the lithosphere. At hydrocarbon fields, they play extremely important roles in conductive and convective heat, as well as in mass transfer to the area of hydrocarbon generation, determining the relationship between the processes of lithogenesis and tectogenesis, and activating the generation of hydrocarbons from oil and gas source rock. Detection of TCMFCFs was carried out using MMSS (the method of microseismic sounding) and MTSM (the magnetotelluric sounding method), in combination with other geological and geophysical data. Practical examples are provided for mineral deposits where subvertical transcrustal columns of increased permeability, traced to considerable depths, have been found; the nature of these unique structures is related to faults of pre-Paleozoic emplacement, which determined the fragmentation of the sub-crystalline structure of the Earth and later, while developing, inherited the conditions of volumetric fluid dynamics, where the residual forms of functioning of fluid-conducting thermohydrocolumns are granitoid batholiths and other magmatic bodies. Experimental modeling of deep processes allowed us to identify the quantum character of crystal structure interactions of minerals with “inert” gases under elevated thermobaric conditions. The roles of helium, nitrogen, and hydrogen in changing the physical properties of rocks, in accordance with their intrastructural diffusion, has been clarified; as a result of low-energy impact, stress fields are formed in the solid rock skeleton, the structures and textures of rocks are rearranged, and general porosity develops. As the pressure increases, energetic interactions intensify, leading to deformations, phase transitions, and the formation of chemical bonds under the conditions of an unstable geological environment, instability which grows with increasing gas saturation, pressure, and temperature. The processes of heat and mass transfer through TCMFCFs to the Earth’s surface occur in stages, accompanied by a release of energy that can manifest as explosions on the surface, in coal and ore mines, and during earthquakes and volcanic eruptions.
- 22 May 2025
- Published by MDPI AG in Geosciences
- Vol. 15 (6) , 190
Open AccessThe Roles of Transcrustal Magma- and Fluid-Conducting Faults in the Formation of Mineral Deposits
In this article, we consider the roles of transcrustal magma- and fluid-conducting faults (TCMFCFs) in the formation of mineral deposits, showing the importance of deep sources of heat and hydrothermal solutions in the genesis and history of deposit formation. As a result of the impact on the lithosphere of mantle plumes rising along TCMFCFs, intense block deformations and tectonic movements are generated; rift systems, and volcanic–plutonic belts spatially combined with them, are formed; and intrusive bodies are introduced. These processes cause epithermal ore formation as a consequence of the impact of mantle plumes rising along TCMFCF to the lithosphere. At hydrocarbon fields, they play extremely important roles in conductive and convective heat, as well as in mass transfer to the area of hydrocarbon generation, determining the relationship between the processes of lithogenesis and tectogenesis, and activating the generation of hydrocarbons from oil and gas source rock. Detection of TCMFCFs was carried out using MMSS (the method of microseismic sounding) and MTSM (the magnetotelluric sounding method), in combination with other geological and geophysical data. Practical examples are provided for mineral deposits where subvertical transcrustal columns of increased permeability, traced to considerable depths, have been found; the nature of these unique structures is related to faults of pre-Paleozoic emplacement, which determined the fragmentation of the sub-crystalline structure of the Earth and later, while developing, inherited the conditions of volumetric fluid dynamics, where the residual forms of functioning of fluid-conducting thermohydrocolumns are granitoid batholiths and other magmatic bodies. Experimental modeling of deep processes allowed us to identify the quantum character of crystal structure interactions of minerals with “inert” gases under elevated thermobaric conditions. The roles of helium, nitrogen, and hydrogen in changing the physical properties of rocks, in accordance with their intrastructural diffusion, has been clarified; as a result of low-energy impact, stress fields are formed in the solid rock skeleton, the structures and textures of rocks are rearranged, and general porosity develops. As the pressure increases, energetic interactions intensify, leading to deformations, phase transitions, and the formation of chemical bonds under the conditions of an unstable geological environment, instability which grows with increasing gas saturation, pressure, and temperature. The processes of heat and mass transfer through TCMFCFs to the Earth’s surface occur in stages, accompanied by a release of energy that can manifest as explosions on the surface, in coal and ore mines, and during earthquakes and volcanic eruptions.
- Open Access
- 16 September 2024
- Published by MDPI AG in Preprints.org
The Role of Transcrust Magma and Fluid-Conducting Faults in the Formation of Mineral Deposits
The article considers the role of transcrustal magma- and fluid-conducting faults in the formation of mineral deposits, shows the importance of a deep source of heat and hydrothermal solutions in the genesis and history of the formation of these deposits. As a result of the impact on the lithosphere of mantle jets rising along transcrustal faults, intense block-and-clump deformations and tectonic movements are generated; rift systems and volcanic-plutonic belts spatially combined with them are formed; intrusive bodies are introduced. At ore deposits, these processes cause epithermal ore formation as a consequence of the impact of mantle jets rising along transcrustal faults on the lithosphere. At hydrocarbon fields, they play an extremely important role in conduction and convective heat and mass transfer to the area of hydrocarbon generation, determine the relationship between the processes of lithogenesis and tectogenesis, and activate the generation of hydrocarbons from oil and gas mother formations. Detection of transcrustal magma- and fluid-supporting faults was carried out by MMZ and MTZ in combination with other geological and geophysical data. Practical examples are given for mineral deposits under which subvertical transcrustal columns of increased permeability traced to considerable depths have been found. The nature of these unique structures is related to faults of pre-Paleozoic time of emplacement, which determined the fragmentation of the subcrystalline structure of the Earth and later developed inherited in the conditions of development of volumetric fluid dynamics. The residual forms of functioning of fluid-conducting thermohydrocolumns are granitoid batholiths and other magmatic bodies. Experimental modelling of deep processes allowed to reveal the quantum character of interactions of crystal structures of minerals with "inert" gases under elevated T-P conditions. The role of helium, nitrogen and hydrogen in changing the physical properties of rocks in connection with their intrastructural diffusion has been clarified. As a result of low-energy impact, stress fields are formed in the solid rock skeleton, the structure and texture of rocks are rearranged, and general porosity develops. With increasing pressure, energy interactions intensify, deformations, phase transitions and chemical bonds occur in an unstable geological environment, which increases with increasing gas saturation, pressure, and temperature. The process of heat and mass transfer along transcrustal magma- and fluid-supplying faults to the Earth's surface occurs in stages with energy release, which can manifest itself in the form of explosions on the day surface, in coal and ore mines, in earthquakes and volcanic eruptions.
- 16 September 2024
- Published by MDPI AG in Preprints.org
Open AccessThe Role of Transcrust Magma and Fluid-Conducting Faults in the Formation of Mineral Deposits
The article considers the role of transcrustal magma- and fluid-conducting faults in the formation of mineral deposits, shows the importance of a deep source of heat and hydrothermal solutions in the genesis and history of the formation of these deposits. As a result of the impact on the lithosphere of mantle jets rising along transcrustal faults, intense block-and-clump deformations and tectonic movements are generated; rift systems and volcanic-plutonic belts spatially combined with them are formed; intrusive bodies are introduced. At ore deposits, these processes cause epithermal ore formation as a consequence of the impact of mantle jets rising along transcrustal faults on the lithosphere. At hydrocarbon fields, they play an extremely important role in conduction and convective heat and mass transfer to the area of hydrocarbon generation, determine the relationship between the processes of lithogenesis and tectogenesis, and activate the generation of hydrocarbons from oil and gas mother formations. Detection of transcrustal magma- and fluid-supporting faults was carried out by MMZ and MTZ in combination with other geological and geophysical data. Practical examples are given for mineral deposits under which subvertical transcrustal columns of increased permeability traced to considerable depths have been found. The nature of these unique structures is related to faults of pre-Paleozoic time of emplacement, which determined the fragmentation of the subcrystalline structure of the Earth and later developed inherited in the conditions of development of volumetric fluid dynamics. The residual forms of functioning of fluid-conducting thermohydrocolumns are granitoid batholiths and other magmatic bodies. Experimental modelling of deep processes allowed to reveal the quantum character of interactions of crystal structures of minerals with "inert" gases under elevated T-P conditions. The role of helium, nitrogen and hydrogen in changing the physical properties of rocks in connection with their intrastructural diffusion has been clarified. As a result of low-energy impact, stress fields are formed in the solid rock skeleton, the structure and texture of rocks are rearranged, and general porosity develops. With increasing pressure, energy interactions intensify, deformations, phase transitions and chemical bonds occur in an unstable geological environment, which increases with increasing gas saturation, pressure, and temperature. The process of heat and mass transfer along transcrustal magma- and fluid-supplying faults to the Earth's surface occurs in stages with energy release, which can manifest itself in the form of explosions on the day surface, in coal and ore mines, in earthquakes and volcanic eruptions.
- Open Access
- 22 April 2020
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 166, 02010
Online ore monitoring using EDXRF method on process conveyor belts at Kazakhmys Corporation LLC operations
The paper discusses organizing online ore monitoring on process conveyor belts at the operations of Kazakhmys Corporation LLC using EDXRF method implemented as an ore-controlling station (OCS) targeting ore size of -300 mm. OCS is supposed to achieve the objective of providing reliable silver detection measurements in the range of 1+ ppm. Objects of monitoring: copper-containing polymetallic ores delivered to Zhezkazgan, Balkhash and Karagaily processing plants for treatment (target elements include copper, zinc, lead, silver, cadmium, and iron) as well as ores transported by the main underground feeder belt at Nurkazgan Mine (copper, zinc, lead, silver, molybdenum, and iron). The ultimate of the studies was to produce an online report on quality and quantities of ore and metals delivered from each of ore suppliers; to adjust the tonnages dispatched by the various shafts and open pits in the online mode; obtain reliable proof for unbiased redistribution of metals back to the mining operations. Equipment used during the studies: EDXRF OCS RLP21T. Key features of the unit are also discussed. The results of bench-scale testing as well as industrial application of OCS RLP-21T are discussed leading to the conclusion of successful online monitoring of silver in ores sized from +1 ppm to -300 mm. The photographs were provided by S. A. Yefimenko.
- 22 April 2020
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 166, 02010
Open AccessOnline ore monitoring using EDXRF method on process conveyor belts at Kazakhmys Corporation LLC operations
The paper discusses organizing online ore monitoring on process conveyor belts at the operations of Kazakhmys Corporation LLC using EDXRF method implemented as an ore-controlling station (OCS) targeting ore size of -300 mm. OCS is supposed to achieve the objective of providing reliable silver detection measurements in the range of 1+ ppm. Objects of monitoring: copper-containing polymetallic ores delivered to Zhezkazgan, Balkhash and Karagaily processing plants for treatment (target elements include copper, zinc, lead, silver, cadmium, and iron) as well as ores transported by the main underground feeder belt at Nurkazgan Mine (copper, zinc, lead, silver, molybdenum, and iron). The ultimate of the studies was to produce an online report on quality and quantities of ore and metals delivered from each of ore suppliers; to adjust the tonnages dispatched by the various shafts and open pits in the online mode; obtain reliable proof for unbiased redistribution of metals back to the mining operations. Equipment used during the studies: EDXRF OCS RLP21T. Key features of the unit are also discussed. The results of bench-scale testing as well as industrial application of OCS RLP-21T are discussed leading to the conclusion of successful online monitoring of silver in ores sized from +1 ppm to -300 mm. The photographs were provided by S. A. Yefimenko.