NCNaidi Cui

Naidi Cui

*This is an algorithmically generated author record based on publicly available information.

Naidi Cui has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • 300-nm-thick, ultralow-loss silicon nitride photonic integrated circuits by 8-in. foundry production

    by Xuguang Zhang, Yuxin Liang, Yujun Chen, Bitao Shen, Jiahui Huang, Chenghao Lao, Yichen Wu, Zhihui Li, Dapeng Liu, Haowen Shu, et al.

    Silicon nitride (Si3N4) photonic integrated circuits are rapidly developing in recent decades. The low loss of Si3N4 attracts significant attention and facilitates a wide range of applications in integrated photonics. In this work, we demonstrate the foundry fabrication of a 300-nm-thick 8-in. wafer-scale Si3N4 platform, with a microresonator intrinsic quality factor of up to 15×106, corresponding to an ultralow loss of 2.2 dB/m. Leveraging this platform, we develop a mature process design kit, achieving a single-mode waveguide propagation loss of less than 5 dB/m, an edge coupler loss of 1.3 dB, and an insertion loss of 0.07 dB for multimode interference couplers. Utilizing the processed Si3N4 chip, we realize a hybrid integrated tunable external cavity laser with a tuning range from 1534 to 1602 nm, a record-high side-mode suppression ratio of up to 76 dB, an optical power of 26 mW, and an intrinsic linewidth of down to 314 Hz. Our work lays a solid foundation for the further development of applications, including nonlinear optics, quantum optics, optical communications, and ranging.


  • High accurate self-calibration of photonic integrated circuit using lossless thermo-optic phase shifters

    by Zhonghua Yang, Dapeng Liu, Jing Feng, Haijun Liao, Yuxing Liang, Zhihui Li, Junbo Feng, Naidi Cui

    The accurate calibration of large-scale switch networks is critical for integrated photonics, in which the integrated optical true time delay chip is typical. In this work, a novel self-calibration method without extra testing ports is proposed by introducing lossless thermo-optic phase shifters instead to calibrate the network. As a demonstration, a 5-bit delay line based on silicon nitride is fabricated and calibrated. The extinction ratio of all the switches is greater than 30.9 dB at the cross and bar states. Using this method, the 5-bit optical delay line which can be tuned in a range of 118.53 ps and reach a low delay time deviation less than +/- 0.4 ps.(c) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement