Shaochong Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shaochong Liu has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Bining Zhou
China North Engine Research Institute, China North Industries Group Corporation Limited, Tianjin 300400, China
1 shared publication - Elxat Elham
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
1 shared publication Guodong Wang
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing, China
1 shared publication- Guoxing Bai
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
1 shared publication - Jianxiu Huang
Hohhot Branch, Inner Mongolia Co., Ltd., China Mobile Communications Group, Hohhot 010020, China
1 shared publication Li Liu
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing, China
1 shared publication
Latest Publications
- 9 December 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 240 (12) , 8534-8550
Path tracking control of multi-axle vehicles using a neural network controller based on multiple look-ahead points
Enhancing the operational speed and control accuracy of autonomous transport vehicles is crucial for meeting the efficiency and safety demands in cargo transportation. Although Nonlinear Model Predictive Control (NMPC), based on vehicle dynamics models and multi-point look-ahead rolling optimization, offers high precision, it suffers from poor real-time performance, making it unsuitable for medium- to high-speed conditions. Compared to two-axle vehicles, multi-axle vehicles have more complex dynamics models and constraints, which increase the computational burden of NMPC. To address these issues, a neural network-based trajectory tracking controller for multi-axle vehicles under medium- to high-speed conditions has been proposed, using NMPC as the training sample generator. The learning samples were generated by NMPC based on the dynamics and multi-point look-ahead rolling optimization of multi-axle vehicles. Additionally, to prevent the failure of the network controller due to vehicle position information deviating from the sample space under the presence of positioning errors, a sample fusion method was employed to enhance the network controller’s robustness to localization disturbances. The neural network controller was obtained through offline training and validated using a MATLAB/Simulink-TruckSim co-simulation platform, where it was compared with other controllers. The simulation results indicated that the control accuracy of the neural network controller is very close to that of NMPC, with a nearly twofold improvement in real-time performance.
- 9 December 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 240 (12) , 8534-8550
Path tracking control of multi-axle vehicles using a neural network controller based on multiple look-ahead points
Enhancing the operational speed and control accuracy of autonomous transport vehicles is crucial for meeting the efficiency and safety demands in cargo transportation. Although Nonlinear Model Predictive Control (NMPC), based on vehicle dynamics models and multi-point look-ahead rolling optimization, offers high precision, it suffers from poor real-time performance, making it unsuitable for medium- to high-speed conditions. Compared to two-axle vehicles, multi-axle vehicles have more complex dynamics models and constraints, which increase the computational burden of NMPC. To address these issues, a neural network-based trajectory tracking controller for multi-axle vehicles under medium- to high-speed conditions has been proposed, using NMPC as the training sample generator. The learning samples were generated by NMPC based on the dynamics and multi-point look-ahead rolling optimization of multi-axle vehicles. Additionally, to prevent the failure of the network controller due to vehicle position information deviating from the sample space under the presence of positioning errors, a sample fusion method was employed to enhance the network controller’s robustness to localization disturbances. The neural network controller was obtained through offline training and validated using a MATLAB/Simulink-TruckSim co-simulation platform, where it was compared with other controllers. The simulation results indicated that the control accuracy of the neural network controller is very close to that of NMPC, with a nearly twofold improvement in real-time performance.
- Open Access
- 20 September 2024
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 15 (9) , 427
Path Tracking for Electric Mining Articulated Vehicles Based on Nonlinear Compensated Multiple Reference Points Linear MPC
The path tracking control of electric mining articulated vehicles (EMAVs), critical equipment commonly used for mining and transportation in underground mines, is a research topic that has received much attention. The path tracking control of EMAVs is subject to several system constraints, including articulation angle and articulation angular velocity. In light of this, many researchers have initiated studies based on model predictive control (MPC). The principal design schemes for existing MPC methods encompass linear MPC (LMPC) utilizing a single reference point, so named the single reference point LMPC (SRP-LMPC), and nonlinear MPC (NMPC). However, NMPC exhibits suboptimal real-time performance, while SRP-LMPC demonstrates inferior accuracy. To simultaneously improve the accuracy and real-time performance of the path tracking control of EMAV, based on the SRP-LMPC, a path tracking control method for EMAV based on nonlinear compensated multiple reference points LMPC (MRP-LMPC) is proposed. The simulation results demonstrate that MRP-LMPC simultaneously exhibits a commendable degree of accuracy and real-time performance. In all simulation results, the displacement error amplitude and heading error amplitude of MRP-LMPC do not exceed 0.2675 m and 0.1108 rad, respectively. Additionally, the maximum solution time in each control period is 5.9580 ms. The accuracy of MRP-LMPC is comparable to that of NMPC. However, the maximum solution time of MRP-LMPC can be reduced by over 27.81% relative to that of NMPC. Furthermore, the accuracy of MRP-LMPC is significantly superior to that of SRP-LMPC. The maximum displacement and heading error amplitude can be reduced by 0.3075 m and 0.1003 rad, respectively, representing a reduction of 65.51% and 73.59% in the middle speed and above scenario.
- 20 September 2024
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 15 (9) , 427
Open AccessPath Tracking for Electric Mining Articulated Vehicles Based on Nonlinear Compensated Multiple Reference Points Linear MPC
The path tracking control of electric mining articulated vehicles (EMAVs), critical equipment commonly used for mining and transportation in underground mines, is a research topic that has received much attention. The path tracking control of EMAVs is subject to several system constraints, including articulation angle and articulation angular velocity. In light of this, many researchers have initiated studies based on model predictive control (MPC). The principal design schemes for existing MPC methods encompass linear MPC (LMPC) utilizing a single reference point, so named the single reference point LMPC (SRP-LMPC), and nonlinear MPC (NMPC). However, NMPC exhibits suboptimal real-time performance, while SRP-LMPC demonstrates inferior accuracy. To simultaneously improve the accuracy and real-time performance of the path tracking control of EMAV, based on the SRP-LMPC, a path tracking control method for EMAV based on nonlinear compensated multiple reference points LMPC (MRP-LMPC) is proposed. The simulation results demonstrate that MRP-LMPC simultaneously exhibits a commendable degree of accuracy and real-time performance. In all simulation results, the displacement error amplitude and heading error amplitude of MRP-LMPC do not exceed 0.2675 m and 0.1108 rad, respectively. Additionally, the maximum solution time in each control period is 5.9580 ms. The accuracy of MRP-LMPC is comparable to that of NMPC. However, the maximum solution time of MRP-LMPC can be reduced by over 27.81% relative to that of NMPC. Furthermore, the accuracy of MRP-LMPC is significantly superior to that of SRP-LMPC. The maximum displacement and heading error amplitude can be reduced by 0.3075 m and 0.1003 rad, respectively, representing a reduction of 65.51% and 73.59% in the middle speed and above scenario.