RWRongxin Wang

Rongxin Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rongxin Wang has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Optimized Slot Design of PMVM Aiming for Reduced Back EMF Total Harmonic Distortion

    by Rongxin Wang, Bo Wang, Wendong Zhang, Wenjun Zhao, Ming Cheng

    Permanent magnet vernier machine (PMVM) are known for high torque density enabled by magnetic field modulation, making them suitable for electric vehicle (EV) applications. However, harmonics in the back electromotive force (EMF) have been shown to degrade torque quality and increase the peak-to-peak torque ripple. In this study, the back EMF of PMVM is analyzed to achieve low total harmonic distortion (THD). The operating principle is examined, and the relationship between the fundamental and harmonic components is derived. The conflict between fundamental enhancement and harmonic suppression is revealed, requiring a trade-off design strategy. Reduced slot opening is found to increase the slot-opening factor, which in turn amplifies both fundamental and high-order harmonics. To address this, a new topology is adopted capable of suppressing high-order harmonics while maintaining high fundamental component. Magnetic field modulator with an inverted trapezoidal slot and a multidegree-of-freedom tooth structure is proposed. With appropriate topology selection, the fundamental can be enhanced while harmonics are minimized, reducing back EMF THD. The effectiveness of the proposed method is validated through experiments on two prototypes.

  • Design and Analysis of High Torque Density Dual Three-Phase Fault-Tolerant Permanent Magnet Vernier Machine for In-Wheel Drive

    by Rongxin Wang, Bo Wang, Shangjian Dai, Ming Cheng, Wei Hua

    Permanent magnet vernier machine (PMVM) is characterized by high torque density due to magnetic field modulation, which enables widespread application for electric vehicle (EV) in-wheel drives where high reliability is essential. Thus, it is desirable if the machine drive could cope with the fault during operation. This study first analyzes the operational principles of PMVMs, identifying inherent merits in the enhancement of torque density and the suppression of fault-induced short-circuit (SC) currents. Second, this study introduces innovative designs for isolated concentric and toroidal winding (TW) structures with dual three-phase windings. Separate inverters are employed to drive the two modules and enable fault-tolerant operation. The machine performance in both healthy and fault conditions is then comprehensively evaluated through finite element analysis (FEA) and experimental validation. The experimental results demonstrate that, compared to the concentric winding (CW) structure, the armature length of the TW structure is reduced by 34.38%, and the SC current is reduced by 20.97%. These findings offer valuable insights for the design of motors with enhanced torque and fault-tolerance capabilities for the EV drive.

  • Optimal Airgap Permeance Design for Magnetic Field Modulated Permanent Magnet Vernier Machine

    by Bo Wang, Rongxin Wang, Haiwei Cai, Dewen Tian, Ming Cheng, Wei Hua

    The airgap permeance of permanent magnet vernier machine (PMVM) plays an important role in the flux modulation which produces the desired harmonic to generate torque. However, traditional airgap permeance design methods usually employ fixed tooth shape and limited design parameters which cannot maximize the desired harmonic and minimize the undesired harmonic, leading to limited torque capability. Thus, this paper proposes a novel optimal airgap permeance design concept to maximize the machine torque capability. The original fixed airgap permeance modulation tooth is decomposed into multiple independent modulation factors with increased freedom for design. Then, an efficient global optimization algorithm is employed to determine the optimal airgap permeance with the aim of maximum torque. Then, an 18s56p PMVM is designed using the proposed concept as an example, achieving 32% higher torque compared to conventional design method with fixed tooth shape. This concept is also capable to improve torque ripple and power factor by optimizing the permeance. Finally, a prototype of the machine has been manufactured and performance tests were conducted, verifying the effectiveness of the design method.


  • Slot-Pole Combination Analysis of FSCW-PMVM on Magnetic Field Modulation Performance

    by Rongxin Wang, Bo Wang, Dewen Tian, Haiwei Cai, Ming Cheng, Wei Hua

    The impact of slot pole combinations on the magnetic field modulation performance of permanent magnet vernier machine (PMVM) is analyzed in this paper. First, the working principle of PMVM is analyzed, slot pole combination constraints are formulated, and a topology group is constructed. Then, the relationship between slot pole combinations, modulation ratios, magnetic field modulation harmonics, and harmonic torque contribution is examined. Further, a design method for multi degree of freedom modulator is proposed to maximize the torque output capacity. Due to the improved airgap permeance, the magnetic field modulation capability of low modulation ratio topologies is significantly enhanced, achieving 40% increase in output torque. Thus, the high torque PMVM could be realized with low pole pairs which eases manufacturing and control. Finally, the similar torque performance of the low modulation ratio machine 18s50p and the high modulation ratio machine 18s56p is successfully achieved by global parameter optimization. The two prototype motors are manufactured and tested to verify the correctness of the analysis.


  • Research on the Magnetic Field Modulation Effect of PMVM from the Perspective of Armature Magnetic Field

    by Rongxin Wang, Bo Wang, Haiwei Cai, Ming Cheng, Wei Hua

    The permanent magnet vernier machine (PMVM) is featured with high-torque density due to the magnetic field modulation effect. At present, the analysis of the magnetic field characteristics and harmonic torque of PMVM is mainly derived from the perspective of permanent magnet (PM) field modulation. The research on armature magnetic field modulation is very limited. Therefore, this article studies the magnetic field modulation from the perspective of armature magnetic field, revealing the relationship between armature magnetic field and output torque. The process of armature magnetic field modulation and PM magnetic field modulation is compared and analyzed. It was found that in PM field modulation, the fundamental wave of PM magnetomotive force is modulated into different spatial harmonics with the same frequency; whereas in armature magnetic field modulation, the harmonics of different armature magnetomotive force are converted into temporal harmonics with identical frequency. Then, based on the perspective of armature magnetic field modulation, a new PMVM is proposed to improve torque. Compared with the existing uniform split teeth topology, the torque of the new PMVM is increased by 32%. Finally, a prototype of the machine has been manufactured and tested to verify its effectiveness.