Khaled Abou Alfa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Khaled Abou Alfa has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
Cecile Hort
4 shared publicationsVincent Platel
4 shared publications- Cecile Hort
Laboratoire de Thermique, Energetique et Procedes-IPRA, EA1932, Université Pau, Pays Adour/E2S UPPA, 64000 Pau, France
3 shared publications Nour Abou Saleh
3 shared publications- Adrian Beda
Université de Haute‐Alsace, Institut de Science des Matériaux de Mulhouse (IS2M), CNRS UMR 7361 15 Rue Jean Starcky 68100 Mulhouse France
2 shared publications Camélia Matei Ghimbeu
2 shared publications
Latest Publications
- Open Access
Performance Evaluation of the Adsorption of a Binary Mixture (CH4/CO2) on Commercial Activated Carbons for Biogas Upgrading
This study investigates the adsorption behavior and separation performance of CH4/CO2 binary mixtures on commercial activated carbons under conditions relevant to biogas upgrading. Adsorption isotherms of a binary CH4/CO2 mixture (60% CH4/40% CO2, v/v), selected as a model mixture relevant to biogas upgrading, were measured at 303.15 K using a high-pressure manometric system coupled with gas chromatography. All investigated materials exhibited preferential adsorption of CO2 over CH4 (SCO2/CH4 > 1), adsorption performance strongly influenced by both textural properties and surface chemistry. While ROx 0.8 showed the highest selectivity (SCO2/CH4 = 6.57), the adsorption capacity was found to be primarily governed by micropore volume and BET surface area, while CNR-115 showed a more balanced adsorption behavior with lower CH4 co-adsorption, leading to improved overall performance. To provide a more application-oriented evaluation, a methane-penalized performance indicator (API*) was introduced, combining CO2 uptake, selectivity, and methane co-adsorption into a single metric. This approach revealed that CNR-115 exhibits the best overall performance, despite not having the highest selectivity, due to its lower CH4 uptake and balanced physicochemical properties. The results highlight the importance of considering both adsorption capacity and methane preservation when selecting adsorbents for biogas upgrading. This work provides insights into structure–performance relationships and proposes a criterion for the evaluation and optimization of carbon-based adsorbents for CO2/CH4 separation.
Open AccessPerformance Evaluation of the Adsorption of a Binary Mixture (CH4/CO2) on Commercial Activated Carbons for Biogas Upgrading
This study investigates the adsorption behavior and separation performance of CH4/CO2 binary mixtures on commercial activated carbons under conditions relevant to biogas upgrading. Adsorption isotherms of a binary CH4/CO2 mixture (60% CH4/40% CO2, v/v), selected as a model mixture relevant to biogas upgrading, were measured at 303.15 K using a high-pressure manometric system coupled with gas chromatography. All investigated materials exhibited preferential adsorption of CO2 over CH4 (SCO2/CH4 > 1), adsorption performance strongly influenced by both textural properties and surface chemistry. While ROx 0.8 showed the highest selectivity (SCO2/CH4 = 6.57), the adsorption capacity was found to be primarily governed by micropore volume and BET surface area, while CNR-115 showed a more balanced adsorption behavior with lower CH4 co-adsorption, leading to improved overall performance. To provide a more application-oriented evaluation, a methane-penalized performance indicator (API*) was introduced, combining CO2 uptake, selectivity, and methane co-adsorption into a single metric. This approach revealed that CNR-115 exhibits the best overall performance, despite not having the highest selectivity, due to its lower CH4 uptake and balanced physicochemical properties. The results highlight the importance of considering both adsorption capacity and methane preservation when selecting adsorbents for biogas upgrading. This work provides insights into structure–performance relationships and proposes a criterion for the evaluation and optimization of carbon-based adsorbents for CO2/CH4 separation.
- 8 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Study of Adsorption Performance in Dry and Humid Conditions of Activated Carbons and Biochars for the Purification of Synthetic Biogas.
Étude des performances d'adsorption en conditions sèches et humides de charbons actifs et de biochars pour l'épuration d'un biogaz synthétique.: Le biogaz, issu de la digestion anaérobie de matière organique,est une source d'énergie renouvelable répondant aux défis énergétiques et environnementaux mondiaux. La purification du biogaz, en séparant les contaminants et le dioxyde de carbone (CO2) pour produire du biométhane, augmente son efficacité énergétique, le rendant adapté comme carburant, pour produire de l'électricité et l'injecter dans les réseaux de gaz naturel.L'étude portait sur la production de biochars et des biochars activés (ABs) à partir de résidus de biomasse dans une optique d'économie circulaire. L'objectif était d'évaluer les performances d'adsorption de ces biochars et ABs, ainsi que des charbons actifs (ACs) de la famille CNR-115, pour la séparation du CO2 et du CH4. Des expérimentations en mode dynamique, en conditions sèches et humides, ont été menées afin de développer et valider un modèle mathématique prédictif 1D des processus d'adsorption. Les biochars ont été synthétisés à 500°C à partir de bambou, de mucilage, de café, de cabosse, de La Teste (boues de traitement des eaux usées) et de Louis Fargue (digestat de méthanisation). En se basant sur l'AAPI et la composition chimique, la cabosse et le bambou ont été choisis pour une pyrolyse à 700°C, une activation avec du CO2, et divers tests physico-chimiques. Les isothermes d'adsorption du CO2 et du CH4 de tous les biochars et AB ont été mesurés. La chaleur d'adsorption du CO2 et la sélectivité approximative ont été déterminées à 303 K et des pressions de 0 à 2 MPa. Les résultats ont montré un processus de physisorption (< 40 kJ mol-1) pour tous les échantillons, indiquant leur régénérabilité. La Cabosse-500 a montré la plus grande capacité d'adsorption du CO2. Le Bamboo-A-900 avait l'AAPI la plus élevée grâce à sa structure améliorée et à sa teneur en CaO. Les isothermes d'adsorption pour un mélange 40%/60% CO2/CH4 ont été déterminés pour Cabosse-A-700, Bamboo-A-900, et CNR-115 à 303 K et des pressions de 0 à 2 MPa. Les résultats de l'API ont montré des valeurs similaires pour les échantillons activés à 0,1 MPa. La sélectivité a été le critère principal pour discriminer les adsorbants. CNR-115-ox et CNR-115-ox-am ont été sélectionnés pour les courbes de percée et la modélisation en raison de leur efficacité supérieure aux ABs et au CNR-115 commercial.Les courbes de percée en conditions humides, proches du biogaz réel (1-5% de vapeur d'eau), ont été étudiées pour le CNR-115-ox et le CNR-115-ox-am. Les expériences ont été effectuées avec un mélange CO2/CH4 sous conditions sèches (40%/60%) et humides (39%/59%/2%) à 303 K et 0,1 MPa. En conditions sèches, le CNR-115-ox a montré une efficacité de séparation plus élevée que CNR-115-ox-am dû de sa surface spécifique élevée. En conditions humides, le CH4 a présenté un effet de roll-up tandis le CO2 a montré un léger roll-up en raison de la co-adsorption avec l'H2O. Le CNR-115-ox-am était plus efficace pour la séparation du CO2 en raison du traitement avec l'NH4OH. Un modèle mathématique 1D a été développé pour prédire l'adsorption en conditions dynamiques du CO2 et du CH4 purs et leur mélange sec sur la famille du CNR-115 modifiée. Le modèle incorporait les conditions expérimentales, les cinétiques, l'advection, la diffusion et l'adsorption. Validé avec des données expérimentales, il s'ajustait précisément aux données d'adsorption du CO2 mais échouait à représenter l'effet de roll-up pour le CH4.L'étude démontré la haute sélectivité du CO2 du CNR-115-ox-am pour l'adsorption en conditions dynamiques humide grâce à ses propriétés de surface, soulignant l'importance des modifications chimiques. La performance supérieure du Bamboo-A-900 pour l'adsorption en conditions statiques suggère un fort potentiel d'épuration. Ces résultats contribuent à l'optimisation des adsorbants, pour valoriser le biogaz, en relevant les défis de séparation efficace et rentable des constituants du biogaz, et en faisant progresser les technologies énergétiques durables.
- 8 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Study of Adsorption Performance in Dry and Humid Conditions of Activated Carbons and Biochars for the Purification of Synthetic Biogas.
Étude des performances d'adsorption en conditions sèches et humides de charbons actifs et de biochars pour l'épuration d'un biogaz synthétique.: Le biogaz, issu de la digestion anaérobie de matière organique,est une source d'énergie renouvelable répondant aux défis énergétiques et environnementaux mondiaux. La purification du biogaz, en séparant les contaminants et le dioxyde de carbone (CO2) pour produire du biométhane, augmente son efficacité énergétique, le rendant adapté comme carburant, pour produire de l'électricité et l'injecter dans les réseaux de gaz naturel.L'étude portait sur la production de biochars et des biochars activés (ABs) à partir de résidus de biomasse dans une optique d'économie circulaire. L'objectif était d'évaluer les performances d'adsorption de ces biochars et ABs, ainsi que des charbons actifs (ACs) de la famille CNR-115, pour la séparation du CO2 et du CH4. Des expérimentations en mode dynamique, en conditions sèches et humides, ont été menées afin de développer et valider un modèle mathématique prédictif 1D des processus d'adsorption. Les biochars ont été synthétisés à 500°C à partir de bambou, de mucilage, de café, de cabosse, de La Teste (boues de traitement des eaux usées) et de Louis Fargue (digestat de méthanisation). En se basant sur l'AAPI et la composition chimique, la cabosse et le bambou ont été choisis pour une pyrolyse à 700°C, une activation avec du CO2, et divers tests physico-chimiques. Les isothermes d'adsorption du CO2 et du CH4 de tous les biochars et AB ont été mesurés. La chaleur d'adsorption du CO2 et la sélectivité approximative ont été déterminées à 303 K et des pressions de 0 à 2 MPa. Les résultats ont montré un processus de physisorption (< 40 kJ mol-1) pour tous les échantillons, indiquant leur régénérabilité. La Cabosse-500 a montré la plus grande capacité d'adsorption du CO2. Le Bamboo-A-900 avait l'AAPI la plus élevée grâce à sa structure améliorée et à sa teneur en CaO. Les isothermes d'adsorption pour un mélange 40%/60% CO2/CH4 ont été déterminés pour Cabosse-A-700, Bamboo-A-900, et CNR-115 à 303 K et des pressions de 0 à 2 MPa. Les résultats de l'API ont montré des valeurs similaires pour les échantillons activés à 0,1 MPa. La sélectivité a été le critère principal pour discriminer les adsorbants. CNR-115-ox et CNR-115-ox-am ont été sélectionnés pour les courbes de percée et la modélisation en raison de leur efficacité supérieure aux ABs et au CNR-115 commercial.Les courbes de percée en conditions humides, proches du biogaz réel (1-5% de vapeur d'eau), ont été étudiées pour le CNR-115-ox et le CNR-115-ox-am. Les expériences ont été effectuées avec un mélange CO2/CH4 sous conditions sèches (40%/60%) et humides (39%/59%/2%) à 303 K et 0,1 MPa. En conditions sèches, le CNR-115-ox a montré une efficacité de séparation plus élevée que CNR-115-ox-am dû de sa surface spécifique élevée. En conditions humides, le CH4 a présenté un effet de roll-up tandis le CO2 a montré un léger roll-up en raison de la co-adsorption avec l'H2O. Le CNR-115-ox-am était plus efficace pour la séparation du CO2 en raison du traitement avec l'NH4OH. Un modèle mathématique 1D a été développé pour prédire l'adsorption en conditions dynamiques du CO2 et du CH4 purs et leur mélange sec sur la famille du CNR-115 modifiée. Le modèle incorporait les conditions expérimentales, les cinétiques, l'advection, la diffusion et l'adsorption. Validé avec des données expérimentales, il s'ajustait précisément aux données d'adsorption du CO2 mais échouait à représenter l'effet de roll-up pour le CH4.L'étude démontré la haute sélectivité du CO2 du CNR-115-ox-am pour l'adsorption en conditions dynamiques humide grâce à ses propriétés de surface, soulignant l'importance des modifications chimiques. La performance supérieure du Bamboo-A-900 pour l'adsorption en conditions statiques suggère un fort potentiel d'épuration. Ces résultats contribuent à l'optimisation des adsorbants, pour valoriser le biogaz, en relevant les défis de séparation efficace et rentable des constituants du biogaz, et en faisant progresser les technologies énergétiques durables.
- Open Access
- 27 August 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (5)
Performance-based screening of biochars for CO2 and CH4 adsorption: Integrating approximate adsorption performance indicator with elemental analysis
- 27 August 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (5)
Open AccessPerformance-based screening of biochars for CO2 and CH4 adsorption: Integrating approximate adsorption performance indicator with elemental analysis
- Open Access
- 26 August 2025
- Published by Elsevier in Biomass and Bioenergy
- Vol. 203
Optimal adsorbent selection for synthetic biogas: Adsorption in static conditions on activated biochars and activated carbons of CNR-115 family
- 26 August 2025
- Published by Elsevier in Biomass and Bioenergy
- Vol. 203
Open AccessOptimal adsorbent selection for synthetic biogas: Adsorption in static conditions on activated biochars and activated carbons of CNR-115 family
- Open Access
- 4 July 2025
- Published by Elsevier in Chemical Engineering Journal Advances
- Vol. 23
Comparative study of biogas treatment in dry and wet conditions using modified activated carbons of CNR-115 family
- 4 July 2025
- Published by Elsevier in Chemical Engineering Journal Advances
- Vol. 23
Open AccessComparative study of biogas treatment in dry and wet conditions using modified activated carbons of CNR-115 family
- Open Access
- 29 May 2025
- Published by Springer Nature in International Journal of Thermophysics
- Vol. 46 (7) , 1-14
Phase Behavior of CO2 + 2,2-dimethylbutane and CO2 + 2-methylpentane from 293 K to 363 K and at Pressures up to 11 MPa
This study is a continuation of a series of works concerning the acquisition of new experimental data related to binary mixtures of branched alkanes with CO2. A synthetic method was employed to measure phase transition pressures for the systems CO2 + 2,2-dimethylbutane and CO2 + 2-methylpentane with an adjustable-volume high-pressure cell. To our knowledge, these binary systems were investigated for the first time in this work. Bubble and dew point pressures were obtained by visual detection at constant composition with an expanded uncertainty ranging from (0.04 to 0.08) MPa. Mixtures were investigated at temperatures ranging from (293.15 to 363.15) K with pressures up to 11 MPa. The Peng-Robinson equation of state was used to correlate the experimental data. An accurate representation of the results has been obtained by using classical mixing rules with temperature-dependent binary interaction parameters regressed against experimental data. The predictive model PPR78 has also provided satisfactory results.
- 29 May 2025
- Published by Springer Nature in International Journal of Thermophysics
- Vol. 46 (7) , 1-14
Open AccessPhase Behavior of CO2 + 2,2-dimethylbutane and CO2 + 2-methylpentane from 293 K to 363 K and at Pressures up to 11 MPa
This study is a continuation of a series of works concerning the acquisition of new experimental data related to binary mixtures of branched alkanes with CO2. A synthetic method was employed to measure phase transition pressures for the systems CO2 + 2,2-dimethylbutane and CO2 + 2-methylpentane with an adjustable-volume high-pressure cell. To our knowledge, these binary systems were investigated for the first time in this work. Bubble and dew point pressures were obtained by visual detection at constant composition with an expanded uncertainty ranging from (0.04 to 0.08) MPa. Mixtures were investigated at temperatures ranging from (293.15 to 363.15) K with pressures up to 11 MPa. The Peng-Robinson equation of state was used to correlate the experimental data. An accurate representation of the results has been obtained by using classical mixing rules with temperature-dependent binary interaction parameters regressed against experimental data. The predictive model PPR78 has also provided satisfactory results.
- Open Access
- 10 February 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (4) , 1445
Approximate Adsorption Performance Indicator in Evaluating Sustainable Bamboo-Derived Adsorbents for Biogas Upgrading
Purifying biogas by removing contaminants and carbon dioxide (CO2) to produce biomethane enhances its energy content, making it suitable as fuel and for injection into natural gas grids. Bamboo-derived adsorbents Bamboo-500 (pyrolyzed at 500 °C), Bamboo-700 (pyrolyzed at 700 °C), and Bamboo-A-900 (activated with CO2 at 900 °C) were synthesized and characterized to evaluate their performance for CO2 and CH4 adsorption. Increasing pyrolysis temperature from 500 °C to 700 °C and further CO2 activation at 900 °C enhanced adsorption capacities of CO2 and CH4 due to improved surface area and micropore structure. In this study, the novel Approximate Adsorption Performance Indicator (AAPI) approach is introduced, offering an efficient method for evaluating adsorbent performance, particularly in biogas upgrading. AAPI results suggest Bamboo-500 is suitable for biogas upgrading at very low pressures (2 capacity (1.9 ± 0.2 mol kg−1). However, Bamboo-A-900 excelled at medium and high pressures by its highest CO2 adsorption capacity (8.0 ± 0.3 mol kg−1) promoted by the high surface area (1220 m2g−1) and calcium oxide presence. Finally, Bamboo-A-900 shows promise for enhancing CO2 adsorption and biogas upgrading. Bamboo-derived adsorbents offer a sustainable solution for biogas upgrading, supporting Sustainable Development Goals by promoting clean energy transitions.
- 10 February 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (4) , 1445
Open AccessApproximate Adsorption Performance Indicator in Evaluating Sustainable Bamboo-Derived Adsorbents for Biogas Upgrading
Purifying biogas by removing contaminants and carbon dioxide (CO2) to produce biomethane enhances its energy content, making it suitable as fuel and for injection into natural gas grids. Bamboo-derived adsorbents Bamboo-500 (pyrolyzed at 500 °C), Bamboo-700 (pyrolyzed at 700 °C), and Bamboo-A-900 (activated with CO2 at 900 °C) were synthesized and characterized to evaluate their performance for CO2 and CH4 adsorption. Increasing pyrolysis temperature from 500 °C to 700 °C and further CO2 activation at 900 °C enhanced adsorption capacities of CO2 and CH4 due to improved surface area and micropore structure. In this study, the novel Approximate Adsorption Performance Indicator (AAPI) approach is introduced, offering an efficient method for evaluating adsorbent performance, particularly in biogas upgrading. AAPI results suggest Bamboo-500 is suitable for biogas upgrading at very low pressures (2 capacity (1.9 ± 0.2 mol kg−1). However, Bamboo-A-900 excelled at medium and high pressures by its highest CO2 adsorption capacity (8.0 ± 0.3 mol kg−1) promoted by the high surface area (1220 m2g−1) and calcium oxide presence. Finally, Bamboo-A-900 shows promise for enhancing CO2 adsorption and biogas upgrading. Bamboo-derived adsorbents offer a sustainable solution for biogas upgrading, supporting Sustainable Development Goals by promoting clean energy transitions.
- Open Access
Cocoa Pod Husk Carbon Family for Biogas Upgrading: Preliminary Assessment Using the Approximate Adsorption Performance Indicator
The preliminary selection of adsorbents for the separation of a gas mixture based on pure gas adsorption remains a critical challenge; thus, an approximate adsorption performance indicator (AAPI) was proposed for the initial evaluation of the adsorbents to separate the biogas main constituents (carbon dioxide/methane (CO2/CH4)) by studying their pure gas adsorption. Three samples derived from cocoa pod husk (CPH), namely Cabosse-500 (pyrolyzed at 500 °C), Cabosse-700 (pyrolyzed at 700 °C), and Cabosse-A-700 (activated with CO2 at 700 °C), were synthesized, characterized, and evaluated for the pure gases adsorption. This study presents an AAPI evaluation, which takes into account adsorption capacity, approximate selectivity, and heat of adsorption. Adsorption isotherms indicate the ability of the CPH family to selectively capture CO2 over CH4, as they have a high approximate selectivity (>1) thanks to their physical properties. Changing the pyrolysis temperature, activation methods, and varying the pressure can significantly change the choice of the most effective adsorbent; Cabosse-A-700 showed better performance than the other two in the low and high pressure range owing to its presence of micropores and mesopores, which enhances the CO2 adsorption and therefore the AAPI.
Open AccessCocoa Pod Husk Carbon Family for Biogas Upgrading: Preliminary Assessment Using the Approximate Adsorption Performance Indicator
The preliminary selection of adsorbents for the separation of a gas mixture based on pure gas adsorption remains a critical challenge; thus, an approximate adsorption performance indicator (AAPI) was proposed for the initial evaluation of the adsorbents to separate the biogas main constituents (carbon dioxide/methane (CO2/CH4)) by studying their pure gas adsorption. Three samples derived from cocoa pod husk (CPH), namely Cabosse-500 (pyrolyzed at 500 °C), Cabosse-700 (pyrolyzed at 700 °C), and Cabosse-A-700 (activated with CO2 at 700 °C), were synthesized, characterized, and evaluated for the pure gases adsorption. This study presents an AAPI evaluation, which takes into account adsorption capacity, approximate selectivity, and heat of adsorption. Adsorption isotherms indicate the ability of the CPH family to selectively capture CO2 over CH4, as they have a high approximate selectivity (>1) thanks to their physical properties. Changing the pyrolysis temperature, activation methods, and varying the pressure can significantly change the choice of the most effective adsorbent; Cabosse-A-700 showed better performance than the other two in the low and high pressure range owing to its presence of micropores and mesopores, which enhances the CO2 adsorption and therefore the AAPI.
- 21 September 2024
- Published by Springer Nature
- p. 91-99
Evaluation of the Performance of an Activated Carbon’s Family for Biogas Upgrading Using the Adsorption Performance Indicator
- 21 September 2024
- Published by Springer Nature
- p. 91-99
Evaluation of the Performance of an Activated Carbon’s Family for Biogas Upgrading Using the Adsorption Performance Indicator