Jihoon Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jihoon Lee has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Sung Heum Park
Department of Physics Pukyong National University Busan Republic of Korea
3 shared publications - Hyosung Choi
Department of Chemistry Hanyang University Seoul Republic of Korea
2 shared publications - Jung Hyun Jeong
Department of Physics, Pukyong National University, Busan 608-737, Republic of Korea
2 shared publications - Vellaiappillai Tamilavan
Department of Physics Pukyong National University Busan 608‐737 Republic of Korea
2 shared publications - Bo Ram Lee
School of Advanced Materials Science and Engineering Sungkyunkwan University (SKKU) Suwon Republic of Korea
1 shared publication - Chang-Mok Oh
Advanced Photonics Research Institute Gwangju Institute of Science and Technology Gwangju 61005 Republic of Korea
1 shared publication
Latest Publications
- Top Cited PapersOpen Access
- 20 January 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-11
Super elastic and negative triboelectric polymer matrix for high performance mechanoluminescent platforms
Mechanoluminescence platforms, combining phosphors with elastic polymer matrix, have emerged in smart wearable technology due to their superior elasticity and mechanically driven luminescent properties. However, their luminescence performance often deteriorates under extreme elastic conditions owing to a misinterpretation of polymer matrix behavior. Here, we unveil the role of the polymer matrices in mechanoluminescence through an interface-triboelectric effect driven by elasticity, achieving both high elasticity and brightness. By investigating interactions between elastic polymers and copper doped zinc sulfide microparticles, we reveal that elasticity significantly governed triboelectric effects for mechanoluminescence. In particular, high negative triboelectricity emerged as the key to overcoming poor triboelectric effect in extreme elastic conditions. This led to the discovery of polybutylene adipate-co-terephthalate silane and polycarbonate silane, achieving remarkable elasticity over 100% and a brightness of 139 cd/m2. These findings offer fundamental insights to select the optimal polymer matrix based on systematic parameters for various smart wearable applications.
- 20 January 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-11
Top Cited PapersOpen AccessSuper elastic and negative triboelectric polymer matrix for high performance mechanoluminescent platforms
Mechanoluminescence platforms, combining phosphors with elastic polymer matrix, have emerged in smart wearable technology due to their superior elasticity and mechanically driven luminescent properties. However, their luminescence performance often deteriorates under extreme elastic conditions owing to a misinterpretation of polymer matrix behavior. Here, we unveil the role of the polymer matrices in mechanoluminescence through an interface-triboelectric effect driven by elasticity, achieving both high elasticity and brightness. By investigating interactions between elastic polymers and copper doped zinc sulfide microparticles, we reveal that elasticity significantly governed triboelectric effects for mechanoluminescence. In particular, high negative triboelectricity emerged as the key to overcoming poor triboelectric effect in extreme elastic conditions. This led to the discovery of polybutylene adipate-co-terephthalate silane and polycarbonate silane, achieving remarkable elasticity over 100% and a brightness of 139 cd/m2. These findings offer fundamental insights to select the optimal polymer matrix based on systematic parameters for various smart wearable applications.
- 18 September 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 11 (40) , 14009-14017
Positional effects of alkyl chains on the photovoltaic performances of quinoxaline-based polymers
Controlling the alkyl chains is an efficient and simple method for modifying various aspects of conjugated polymers. In particular, we focused on the positioning effects of the alkyl chains on the photovoltaic features of p-type polymer donors. To achieve this, two D–A-type quinoxaline-based polymers with the same chemical composition, except for the location of the alkyl chains, were designed and synthesized. A basic D–A-type polymeric structure was generated by assembling electron-donating benzodithiophene (BDT) and monocyanated quinoxaline-based monomers through a thiophene bridge. Subsequently, the selective incorporation of branched 2-butyloctyl chains into either the thiophene bridges or thiophene side groups at the 2,3-positions of the quinoxaline unit afforded two target polymers, PBT-dQxCN and PBT-uQxCN, respectively. Most of all, changing the position of the alkyl chains leads to a significant alteration in the molecular planarity, thereby making a difference in the diverse properties of the polymers. Owing to the favorable optical, electrochemical, and morphological properties of PBT-uQxCN caused by the more planar conformation, the conventional nonfullerene acceptor-based device made from PBT-uQxCN exhibited higher power conversion efficiency (PCE) of 11.51%, compared to that based on PBT-dQxCN (9.11%). These results clearly reveal the importance of controlling the alkyl chain positions to enhance the photovoltaic characteristics of quinoxaline-based polymers.
- 18 September 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 11 (40) , 14009-14017
Positional effects of alkyl chains on the photovoltaic performances of quinoxaline-based polymers
Controlling the alkyl chains is an efficient and simple method for modifying various aspects of conjugated polymers. In particular, we focused on the positioning effects of the alkyl chains on the photovoltaic features of p-type polymer donors. To achieve this, two D–A-type quinoxaline-based polymers with the same chemical composition, except for the location of the alkyl chains, were designed and synthesized. A basic D–A-type polymeric structure was generated by assembling electron-donating benzodithiophene (BDT) and monocyanated quinoxaline-based monomers through a thiophene bridge. Subsequently, the selective incorporation of branched 2-butyloctyl chains into either the thiophene bridges or thiophene side groups at the 2,3-positions of the quinoxaline unit afforded two target polymers, PBT-dQxCN and PBT-uQxCN, respectively. Most of all, changing the position of the alkyl chains leads to a significant alteration in the molecular planarity, thereby making a difference in the diverse properties of the polymers. Owing to the favorable optical, electrochemical, and morphological properties of PBT-uQxCN caused by the more planar conformation, the conventional nonfullerene acceptor-based device made from PBT-uQxCN exhibited higher power conversion efficiency (PCE) of 11.51%, compared to that based on PBT-dQxCN (9.11%). These results clearly reveal the importance of controlling the alkyl chain positions to enhance the photovoltaic characteristics of quinoxaline-based polymers.
- 1 January 2022
- Published by Inderscience Publishers in International Journal of Internet Technology and Secured Transactions
- Vol. 1 (1) , 1
Implementation of Bixby oriented electric vehicle charging station searching service
- 1 January 2022
- Published by Inderscience Publishers in International Journal of Internet Technology and Secured Transactions
- Vol. 1 (1) , 1
Implementation of Bixby oriented electric vehicle charging station searching service
- 8 July 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 12 (27) , 6418-6424
Enhanced Charge Separation in Ternary Bulk-Heterojunction Organic Solar Cells by Fullerenes
Carrier generation dynamics in binary PTB7-Th:COi8DFIC (1:1.5) and ternary PTB7-Th:COi8DFIC:PC71BM (1:1.05:0.45) composites were investigated to identify the origins of high power conversion efficiencies (PCEs) in ternary bulk-heterojunction (BHJ) organic solar cells. Steady-state photoluminescence and time-resolved photoinduced absorption spectroscopic analyses revealed that the ternary composite exhibited faster hole transfer from COi8DFIC to PTB7-Th (8 ps compared to 21 ps in the binary composite), which led to an improved exciton separation yield in COi8DFIC (94% compared to 68% in the binary composite). Improved intermixing of the component materials and efficient electron transfer from COi8DFIC to PC71BM facilitated enhancement in the hole transfer rate. The COi8DFIC-to-PC71BM electron transfer promoted an electron transport cascade over PTB7-Th, COi8DFIC, and PC71BM, which efficiently deactivated back-electron transfer (carrier recombination loss) from COi8DFIC to PTB7-Th at ∼160 ps and assisted in improving the PCE of the ternary BHJ cell (13.4% compared to 10.5% in the binary BHJ cell).
- 8 July 2021
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 12 (27) , 6418-6424
Enhanced Charge Separation in Ternary Bulk-Heterojunction Organic Solar Cells by Fullerenes
Carrier generation dynamics in binary PTB7-Th:COi8DFIC (1:1.5) and ternary PTB7-Th:COi8DFIC:PC71BM (1:1.05:0.45) composites were investigated to identify the origins of high power conversion efficiencies (PCEs) in ternary bulk-heterojunction (BHJ) organic solar cells. Steady-state photoluminescence and time-resolved photoinduced absorption spectroscopic analyses revealed that the ternary composite exhibited faster hole transfer from COi8DFIC to PTB7-Th (8 ps compared to 21 ps in the binary composite), which led to an improved exciton separation yield in COi8DFIC (94% compared to 68% in the binary composite). Improved intermixing of the component materials and efficient electron transfer from COi8DFIC to PC71BM facilitated enhancement in the hole transfer rate. The COi8DFIC-to-PC71BM electron transfer promoted an electron transport cascade over PTB7-Th, COi8DFIC, and PC71BM, which efficiently deactivated back-electron transfer (carrier recombination loss) from COi8DFIC to PTB7-Th at ∼160 ps and assisted in improving the PCE of the ternary BHJ cell (13.4% compared to 10.5% in the binary BHJ cell).
- 8 June 2018
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 42 (14) , 12045-12053
PyrroleN-alkyl side chain effects on the properties of pyrrolo[3,4-c]pyrrole-1,3-dione-based polymers for polymer solar cells
In this study, two new pyrrolo[3,4-c]pyrrole-1,3-dione (PPD)-based polymers (P3 and P4) incorporating a 2-octyldodecyl (branched alkyl) group on the pyrrole nitrogen of the PPD unit were prepared. Their properties were briefly compared to those of the structurally quite similar PPD-based polymers (P1 and P2) with an n-octyl (linear alkyl) group on the PPD unit, in order to understand the importance of the pyrrole N-alkyl group. The calculated optical band gaps (Eg) and highest occupied molecular orbital energy levels of P3 and P4 were found to be around ∼0.1 eV higher and deeper, respectively, compared to those of the respective linear alkylated polymers P1 and P2. The maximum power conversion efficiency (PCE) obtained for the polymer solar cells made by using P3 or P4:PC70BM blends without any additive was around ∼2%, which was quite similar to that of the PSCs made using P1 or P2:PC70BM blends. However, P3 and P4 exhibited a notably lower PCE than that of P1 and P2, respectively, when the polymer solar cells were created with an additive. This study confirmed that the alkyl substituent on the pyrrole nitrogen of the PPD unit significantly affects the properties of the resulting polymer.
- 8 June 2018
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 42 (14) , 12045-12053
PyrroleN-alkyl side chain effects on the properties of pyrrolo[3,4-c]pyrrole-1,3-dione-based polymers for polymer solar cells
In this study, two new pyrrolo[3,4-c]pyrrole-1,3-dione (PPD)-based polymers (P3 and P4) incorporating a 2-octyldodecyl (branched alkyl) group on the pyrrole nitrogen of the PPD unit were prepared. Their properties were briefly compared to those of the structurally quite similar PPD-based polymers (P1 and P2) with an n-octyl (linear alkyl) group on the PPD unit, in order to understand the importance of the pyrrole N-alkyl group. The calculated optical band gaps (Eg) and highest occupied molecular orbital energy levels of P3 and P4 were found to be around ∼0.1 eV higher and deeper, respectively, compared to those of the respective linear alkylated polymers P1 and P2. The maximum power conversion efficiency (PCE) obtained for the polymer solar cells made by using P3 or P4:PC70BM blends without any additive was around ∼2%, which was quite similar to that of the PSCs made using P1 or P2:PC70BM blends. However, P3 and P4 exhibited a notably lower PCE than that of P1 and P2, respectively, when the polymer solar cells were created with an additive. This study confirmed that the alkyl substituent on the pyrrole nitrogen of the PPD unit significantly affects the properties of the resulting polymer.
- 22 March 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 6 (15) , 4281-4289
Highly crystalline new benzodithiophene–benzothiadiazole copolymer for efficient ternary polymer solar cells with an energy conversion efficiency of over 10%
A new alternating polymer P(BDTSi–DFBT), poly(4,8-bis(triisopropylsilylethynyl)-benzo[1,2-b:4,5-b′]dithiophene-alt-5,6-difluoro-4,7-bis(4-octylthiophen-2-yl)benzo[c][1,2,5]thiadiazole), was prepared via Stille polymerization. The determined absorption maximum and optical band-gap (Eg) of P(BDTSi–DFBT) were 590 nm and 1.74 eV, respectively. The calculated highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of P(BDTSi–DFBT) were −5.45 eV and −3.71 eV, respectively. The X-ray diffraction (XRD) analysis confirmed that P(BDTSi–DFBT) is a crystalline polymer. The binary-polymer solar cells, ITO/PEDOT:PSS/P(BDTSi–DFBT) : PC70BM (1 : 1.5 wt%) + 3 vol% DIO/Al, made from P(BDTSi–DFBT) gave a power conversion efficiency (PCE) of 5.02% with an open-circuit voltage (Voc) of 0.81 V, a short-circuit current (Jsc) of 11.68 mA cm−2, and a fill factor (FF) of 53%. Conversely, the ternary-polymer solar cells, ITO/PEDOT:PSS/PTB7-Th : P(BDTSi–DFBT) : PC70BM (0.8 : 0.2 : 1.5 wt%) + 3 vol% DIO/Al, made with a synthesized medium band-gap P(BDTSi–DFBT) and low band-gap PTB7-Th, offered a maximum PCE of 10.05%, with a Voc of 0.79 V, a Jsc of 17.92 mA cm−2, and a FF of 71%.
- 22 March 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 6 (15) , 4281-4289
Highly crystalline new benzodithiophene–benzothiadiazole copolymer for efficient ternary polymer solar cells with an energy conversion efficiency of over 10%
A new alternating polymer P(BDTSi–DFBT), poly(4,8-bis(triisopropylsilylethynyl)-benzo[1,2-b:4,5-b′]dithiophene-alt-5,6-difluoro-4,7-bis(4-octylthiophen-2-yl)benzo[c][1,2,5]thiadiazole), was prepared via Stille polymerization. The determined absorption maximum and optical band-gap (Eg) of P(BDTSi–DFBT) were 590 nm and 1.74 eV, respectively. The calculated highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of P(BDTSi–DFBT) were −5.45 eV and −3.71 eV, respectively. The X-ray diffraction (XRD) analysis confirmed that P(BDTSi–DFBT) is a crystalline polymer. The binary-polymer solar cells, ITO/PEDOT:PSS/P(BDTSi–DFBT) : PC70BM (1 : 1.5 wt%) + 3 vol% DIO/Al, made from P(BDTSi–DFBT) gave a power conversion efficiency (PCE) of 5.02% with an open-circuit voltage (Voc) of 0.81 V, a short-circuit current (Jsc) of 11.68 mA cm−2, and a fill factor (FF) of 53%. Conversely, the ternary-polymer solar cells, ITO/PEDOT:PSS/PTB7-Th : P(BDTSi–DFBT) : PC70BM (0.8 : 0.2 : 1.5 wt%) + 3 vol% DIO/Al, made with a synthesized medium band-gap P(BDTSi–DFBT) and low band-gap PTB7-Th, offered a maximum PCE of 10.05%, with a Voc of 0.79 V, a Jsc of 17.92 mA cm−2, and a FF of 71%.