Ahmad Batari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ahmad Batari has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Saeed Modibbo Saeed
Department of Civil Engineering, Abubakar Tafawa Balewa University, PMB 0248, Bauchi, Nigeria
2 shared publicationsAbubakar Mamuda
Department of Civil Engineering, Abubakar Tafawa Balewa University, Bauchi, Nigeria
1 shared publicationAbubakar Usman Baraya
Department of Civil Engineering, Abubakar Tafawa Balewa University, Bauchi, Nigeria
1 shared publicationAdamu Umar Chinade
Department of Civil Engineering, Abubakar Tafawa Balewa University, Bauchi, Nigeria
1 shared publicationBuhari Mohammed Ardo
Department of Building, Federal Polytechnic Damaturu, Nigeria
1 shared publicationIbrahim Abdulkarim Ikara
Department of Civil Engineering, Abubakar Tafawa Balewa University, Bauchi, Nigeria
1 shared publication
Latest Publications
- Open Access
- 13 May 2025
- Published by African Tulip Academic Press in African Journal of Advances in Science and Technology Research
- Vol. 19 (1) , 86-100
Assessment of Wall Defects in Student Hostels at Federal Polytechnic Damaturu
This study investigates the causes and remedies of wall defects in student hostels at Federal Polytechnic Damaturu, Yobe State, Nigeria. Using an observational and survey-based approach, data were collected through condition surveys and interviews in 24 randomly selected blocks across five hostels. Findings reveal that chemical agents (28.7%), mechanical agents (21.8%), and occupant-related factors (22.9%) are the primary causes of defects, with common issues including cracks, dampness penetration, peeling paint, and efflorescence. These findings align with existing literature, emphasizing the role of moisture, poor construction practices, and user behaviour in wall deterioration. Recommendations include enhancing maintenance practices, educating users about responsible behaviour, employing durable materials, and adapting designs to local climatic conditions.
- 13 May 2025
- Published by African Tulip Academic Press in African Journal of Advances in Science and Technology Research
- Vol. 19 (1) , 86-100
Open AccessAssessment of Wall Defects in Student Hostels at Federal Polytechnic Damaturu
This study investigates the causes and remedies of wall defects in student hostels at Federal Polytechnic Damaturu, Yobe State, Nigeria. Using an observational and survey-based approach, data were collected through condition surveys and interviews in 24 randomly selected blocks across five hostels. Findings reveal that chemical agents (28.7%), mechanical agents (21.8%), and occupant-related factors (22.9%) are the primary causes of defects, with common issues including cracks, dampness penetration, peeling paint, and efflorescence. These findings align with existing literature, emphasizing the role of moisture, poor construction practices, and user behaviour in wall deterioration. Recommendations include enhancing maintenance practices, educating users about responsible behaviour, employing durable materials, and adapting designs to local climatic conditions.
- Open Access
- 31 August 2024
- Published by African Tulip Academic Press in African Journal of Advances in Science and Technology Research
- Vol. 16 (1) , 74-96
Roundabout Safety Benefits, Design Considerations and Safety Evaluation Techniques
Roundabouts are increasingly replacing conventional signalized intersections due to their potential to enhance traffic safety and operational efficiency. This paper examines and reviews the safety benefits, design considerations, and evaluation methods for roundabouts. Studies consistently show significant reductions in crashes at roundabouts relative to other at-grade intersection control systems, particularly severe injury crashes, with reductions ranging from 37% to 88%. Roundabouts reduce conflict points, lower vehicle speeds, and improve safety for both motorized and vulnerable road users. The methodology for this paper involved a comprehensive review of literature on roundabout design and safety evaluation techniques. Data from global studies were analyzed to identify key design elements such as geometric layout, signage, and pedestrian provisions, which contribute to roundabout safety. Various safety evaluation methods, including crash data analysis, traffic conflict techniques, and surrogate safety measures, were also assessed for their effectiveness in evaluating roundabout performance. Findings indicate that proper geometric design, clear signage, and the use of innovative features like right-turn bypass lanes and roundabout metering systems can enhance safety and traffic flow. Based on these findings, the paper recommends integrating these design elements, prioritizing the safety of vulnerable users, and utilizing advanced safety evaluation techniques, including simulation modelling and intelligent transportation systems (ITS) to further optimize roundabout performance.
- 31 August 2024
- Published by African Tulip Academic Press in African Journal of Advances in Science and Technology Research
- Vol. 16 (1) , 74-96
Open AccessRoundabout Safety Benefits, Design Considerations and Safety Evaluation Techniques
Roundabouts are increasingly replacing conventional signalized intersections due to their potential to enhance traffic safety and operational efficiency. This paper examines and reviews the safety benefits, design considerations, and evaluation methods for roundabouts. Studies consistently show significant reductions in crashes at roundabouts relative to other at-grade intersection control systems, particularly severe injury crashes, with reductions ranging from 37% to 88%. Roundabouts reduce conflict points, lower vehicle speeds, and improve safety for both motorized and vulnerable road users. The methodology for this paper involved a comprehensive review of literature on roundabout design and safety evaluation techniques. Data from global studies were analyzed to identify key design elements such as geometric layout, signage, and pedestrian provisions, which contribute to roundabout safety. Various safety evaluation methods, including crash data analysis, traffic conflict techniques, and surrogate safety measures, were also assessed for their effectiveness in evaluating roundabout performance. Findings indicate that proper geometric design, clear signage, and the use of innovative features like right-turn bypass lanes and roundabout metering systems can enhance safety and traffic flow. Based on these findings, the paper recommends integrating these design elements, prioritizing the safety of vulnerable users, and utilizing advanced safety evaluation techniques, including simulation modelling and intelligent transportation systems (ITS) to further optimize roundabout performance.
- Open Access
- 11 April 2018
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 140 (1) , 012086
Effect of Bio based rejuvenator on mix design, Energy consumption and GHG Emission of High RAP Mixture
Concerns about the cost, availability, and environmental impact of using petroleum-based materials have led to increased usage of reclaimed asphalt pavement (RAP). Mean-while, the demand of the road industry to decrease the energy consumptions and reduce the release of greenhouse gases as well as other harmful gases, which cause serious air pollution has increased due to the amount of energy consumed is a major component of pavement construction that significantly contributes to the total cost. This paper evaluates the effects of Biobased rejuvenator known as JCO on the required heat energy and the amount of CO2 produced to increase the temperature of RAP and virgin aggregates and one binder from 25C to the point of mixing. The results showed that incorporating Biobased rejuvenator (JCO) can potentially reduce the required heat energy and amount of greenhouse gas produced by RAP and virgin, respectively.
- 11 April 2018
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 140 (1) , 012086
Open AccessEffect of Bio based rejuvenator on mix design, Energy consumption and GHG Emission of High RAP Mixture
Concerns about the cost, availability, and environmental impact of using petroleum-based materials have led to increased usage of reclaimed asphalt pavement (RAP). Mean-while, the demand of the road industry to decrease the energy consumptions and reduce the release of greenhouse gases as well as other harmful gases, which cause serious air pollution has increased due to the amount of energy consumed is a major component of pavement construction that significantly contributes to the total cost. This paper evaluates the effects of Biobased rejuvenator known as JCO on the required heat energy and the amount of CO2 produced to increase the temperature of RAP and virgin aggregates and one binder from 25C to the point of mixing. The results showed that incorporating Biobased rejuvenator (JCO) can potentially reduce the required heat energy and amount of greenhouse gas produced by RAP and virgin, respectively.
- Open Access
- 20 November 2017
- Published by Science Publishing Group in International Journal of Transportation Engineering and Technology
- Vol. 3 (4) , 67-73
Effect of Bagasse Ash on the Properties of Cement Stabilized Black Cotton Soil
When proximate and locally available materials to be used for road pavement construction are deficient to meet the nominal requirements of the intended flexible pavement layer; then stabilization becomes necessary. Therefore, this paper presents the results of laboratory experiments undertaken to assess the effect of sugarcane Bagasse Ash (BA) as an admixture to cement stabilized Black Cotton Soil (BCS). The Bagasse was obtained from a dump-site at Kasuwan Shanu market Bauchi and was incinerated at a controlled temperature range between 600°C and 700°C to get the BA, while the BCS was obtained along Kanawa-Jauro-Gotel road, in Yemaltu-Deba, Gombe, Nigeria. The specimens were prepared by admixing the four blends of cement stabilized BCS (using 0, 4, 6, and 8% cement) with stepped percentage of BA (0, 1, 2, 3 4, 5, and 6%) by dry weight of the BCS. The experiments carried out on both the natural and treated BCS include; Atterberg’s limits, Sieve/hydrometer analysis, Free swell, Compaction, soaked California Bearing Ratio (CBR), and Unconfined Compressive Strength (UCS) at 7, 14, and 28 days curing periods. The BCS was classified as A – 7 – 6 (68), and CH (high plasticity clay) using the American Association of State Highway and Transportation Officials (AASHTO) and Unified Soil Classification System (USCS) respectively. In addition, the soil was also categorized as High swell potential BCS under Nigerian Building and Road Research Institute (NBRRI) classification. It was found that; addition of BA to cement stabilized BCS affected their compaction characteristics, and improved both the soaked CBR, and the UCS. On the other hand, the addition of BA alone does not improve the strength properties of the natural BCS. The optimum blend was achieved with 5% BA as admixture to BCS stabilized with 8% cement, this blend gave a 7-days soaked CBR of 73% and a UCS value of 851 kN/m 2 after curing for 7 days therefore, satisfied the sub-base requirements of the Nigerian Federal Ministry of Works. This study finally recommends the use of 5% BA with 8% cement for BCS stabilization for use as sub-base in flexible pavement construction.
- 20 November 2017
- Published by Science Publishing Group in International Journal of Transportation Engineering and Technology
- Vol. 3 (4) , 67-73
Open AccessEffect of Bagasse Ash on the Properties of Cement Stabilized Black Cotton Soil
When proximate and locally available materials to be used for road pavement construction are deficient to meet the nominal requirements of the intended flexible pavement layer; then stabilization becomes necessary. Therefore, this paper presents the results of laboratory experiments undertaken to assess the effect of sugarcane Bagasse Ash (BA) as an admixture to cement stabilized Black Cotton Soil (BCS). The Bagasse was obtained from a dump-site at Kasuwan Shanu market Bauchi and was incinerated at a controlled temperature range between 600°C and 700°C to get the BA, while the BCS was obtained along Kanawa-Jauro-Gotel road, in Yemaltu-Deba, Gombe, Nigeria. The specimens were prepared by admixing the four blends of cement stabilized BCS (using 0, 4, 6, and 8% cement) with stepped percentage of BA (0, 1, 2, 3 4, 5, and 6%) by dry weight of the BCS. The experiments carried out on both the natural and treated BCS include; Atterberg’s limits, Sieve/hydrometer analysis, Free swell, Compaction, soaked California Bearing Ratio (CBR), and Unconfined Compressive Strength (UCS) at 7, 14, and 28 days curing periods. The BCS was classified as A – 7 – 6 (68), and CH (high plasticity clay) using the American Association of State Highway and Transportation Officials (AASHTO) and Unified Soil Classification System (USCS) respectively. In addition, the soil was also categorized as High swell potential BCS under Nigerian Building and Road Research Institute (NBRRI) classification. It was found that; addition of BA to cement stabilized BCS affected their compaction characteristics, and improved both the soaked CBR, and the UCS. On the other hand, the addition of BA alone does not improve the strength properties of the natural BCS. The optimum blend was achieved with 5% BA as admixture to BCS stabilized with 8% cement, this blend gave a 7-days soaked CBR of 73% and a UCS value of 851 kN/m 2 after curing for 7 days therefore, satisfied the sub-base requirements of the Nigerian Federal Ministry of Works. This study finally recommends the use of 5% BA with 8% cement for BCS stabilization for use as sub-base in flexible pavement construction.