YWYang Wang

Yang Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yang Wang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Vibration-Excited Combined Harvester for Dual Harvesting of Ears and Stalks: Design and Experiments

    by Xinxin Wang, Yang Wang, Qian Wang, Xiang Li, Ruo Liu, Junlin Liu, Yansong Gong, Yushuai Liu, Duanyang Geng

    Aiming at the reliability of ear picking and the consistency of stalk chopping length in the process of corn ear and stalk harvesting, a new type of corn harvester with both ear and stalk harvesting based on exciting ear picking was developed. Based on the vertical cutting table, the machine realizes the excitation of the ear during the process of stalk transportation by rotating the eight-edged special-shaped pick-up roll, and the stable and orderly transportation of stalks before cutting is realized by the way of clamping and conveying with the rear rollers. By analyzing the configuration and parameter determination methods of the main working parts, the high-efficiency and low-loss harvest of the ear was realized, and the consistency of the cut length of the stalk was guaranteed. A discrete element model (DEM) of ear-bearing maize plants was established using EDEM (version 2024, Altair Engineering, Troy, MI, USA) simulation software, and a five-factor, three-level quadratic orthogonal rotation experiment was conducted based on Response Surface Methodology (RSM). The simulation results indicated that the optimal operational quality was achieved under the following parameters: a header angle of 10°, a snapping roller speed of 942 rpm, a clamping roller speed of 215 rpm, and a moving blade speed of 1450 rpm. Furthermore, multiple sets of field trials were conducted at various forward speeds to validate these findings. The mean values of seed loss rate, ear loss rate, and seed breakage rate are 0.51%, 0.55%, and 0.32%, respectively, for the harvester at operating speeds of 4 km/h, 6 km/h, 8 km/h, and 10 km/h. The σ values are 97%, 98%, 97%, and 98%. The field harvesting performance indexes meet the requirements of technical specifications for evaluating the operation quality of corn combine harvester, and meet the design requirements of low loss, high efficiency, and consistency of stem chopping length.


  • Open Access

    Study and Testing of a Front-Blowing and Rear-Suction Enhanced Cleaning Technology for Grain Combine Harvesters

    by Jianning Yin, Yipeng Cui, Zehao Zha, Qiming Yu, Pengxuan Guan, Yang Wang, Xinxin Wang, Duanyang Geng

    To address the issue in high-throughput longitudinal axial-flow grain combine harvester cleaning systems, in which the extended length of the cleaning chamber results in airflow velocity attenuation and makes it difficult to efficiently and rapidly remove light impurities, a front-blowing and rear-suction enhanced cleaning technology and device was developed. Based on the investigation of the movement characteristics of the cleaning airflow within the cleaning chamber, a theoretical model was established to describe the velocity variation of the front-blowing and rear-suction enhanced cleaning airflow. CFD simulation software was employed to conduct a comparative analysis of the airflow field structure before and after improvement, aiming to identify the influence patterns of key structural parameters on the airflow field distribution. An orthogonal experiment with three factors and three levels was conducted on the improved cleaning system, focusing on the suction fan speed, vertical installation height of the suction fan, and horizontal distance between the suction fan and the sieve surface. The influence of each factor on the airflow field was analyzed, and the optimal parameter combination was obtained. When the suction fan speed was 2275 r/min, the vertical installation height was 72.5 mm, the horizontal distance to the sieve surface was 385 mm, and the airflow non-uniformity coefficient at the rear part of the screen surface was 11.17%, with a relative error of 4.39% compared to the optimization result. Finally, bench tests were conducted to verify the accuracy of the simulation results. Compared to that before improvement, the airflow non-uniformity coefficient at the rear part of the screen surface in the cleaning chamber was reduced by 59.43%, significantly improving the uniformity of airflow distribution. These findings provide both theoretical and technical support for improving the cleaning efficiency and operational performance of high-throughput grain combine harvesters.


  • Open Access

    Research on Axial-Flow Corn-Threshing Technology for High-Throughput Conditions

    by Lin Niu, Pengxuan Guan, Xinxin Wang, Yang Wang, Duanyang Geng

    To address the problems of corn harvesting in the Yellow Huaihai region with high moisture content, such as grain damage and high failure rate, a wider and taller ripple block threshing element was designed by combining the threshing principles of different threshing elements and analyzing the effects of the overall layout and parameters of the element on the threshing process. The threshing element can improve the collision attitude between the corn and the element and prioritize part of the corn kernels falling off during the collision, which makes the subsequent threshing smoother and realizes a low crushing rate of corn in the process of corn detachment. The different stages of the corn-threshing process were analyzed, a threshing simulation test was carried out, and the threshing force of the intact corn on the top side was measured to be 42.86 N; the closer the kernel was to the position of the dislodged kernel, the more the dislodging force was gradually reduced, with a minimum of 2.09 N, which verified that it was difficult to dislodge the kernel when the ear was intact and that the difficulty of dislodging the kernel around the kernel decreased as the corn was dislodged.


  • Open Access

    Research and Experimentation on Sparse–Dense Interphase Curved-Tooth Sorghum Threshing Technology

    by Jie Ma, Qinghao He, Duanyang Geng, Lin Niu, Yipeng Cui, Qiming Yu, Jianning Yin, Yang Wang, Lei Ni

    The high-speed development of the liquor industry brings sorghum demand, which is increasingly strong at the moment. Still, its harvesting mechanization level is low, and with the design of a longitudinal flow sparse and dense curved-teeth sorghum threshing technology, the harvester’s work quality is improved by the reduction of seed impurities. This article describes the working principle of the harvester, the overall distribution of threshing elements, and force analysis of the threshing aspects to determine the structure of the threshing elements. The orthogonal test was carried out, with a sparse–dense interphase threshing drum as the research object, selecting operating speed, threshing element bending angle, and threshing element mounting angle as the test factors, with the entrainment loss rate and the net threshing rate as the assessment indexes for the three-factor, three-level test, and the use of Design-Expert to establish a mathematical regression model between the factors and the two indicators, resulting in the following optimized parameters: when the operating speed is 1.0 m·s−1, the bending angle of the threshing element is 80°, and the mounting angle of the threshing element is 45°, the loss rate of entrainment is 1.89%, and the net threshing rate is 95.53%. The machine’s design indexes are in line with relevant national standards and can meet the demand for mechanized harvesting of sorghum.