Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fernando Ortega-Loza has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Longitudinal Multimodal Dataset of Rainbow Trout Fillets During Refrigerated Storage

    by Mauricio Bolaños-Ledezma, Jose Luis Arciniegas Herrera, Fernando Ortega-Loza, Javier Revelo-Fuelagán, Diego H. Peluffo-Ordoñez

    This dataset supports the development of non-invasive methods for assessing the freshness of rainbow trout (Oncorhynchus mykiss) fillets by combining digital images, gas sensor responses, environmental measurements, and microbiological reference data. Data was collected from 80 fillet portions during seven days of refrigerated storage at 4 °C. Of these, 59 fillets were longitudinally monitored, while the remaining 21 fillets were used for destructive Total Viable Count (TVC) analysis. The dataset contains 820 RAW images and their corresponding JPEG derivatives, together with 210 sensor acquisition sessions comprising 120 time points from five MQ-series gas sensors and two environmental sensors. Based on the daily mean TVC and a threshold of 7 log10 CFU/g, days 1–5 were classified as Fresh and days 6–7 as Spoiled. These classifications represent storage-day microbiological status. The dataset can support computer vision, electronic-nose analysis, and multimodal learning.

  • Open Access

    Advanced Bioethanol as a Transition Fuel in Transportation: Performance in Internal Combustion Engines, Environmental Impacts, and Technological Challenges

    by Cristian Laverde-Albarracín, Beatriz Ledesma-Cano, Fernando Ortega-Loza, Sergio Nogales-Delgado, Sebastián Naranjo-Silva, Diego Peña-Banegas, Samantha Puente-Bosquez, Danner Figueroa-Guerra

    Transport decarbonization cannot rely exclusively on electrification, particularly in regions where charging infrastructure, vehicle affordability, and fleet renewal remain constrained. This review critically assesses advanced bioethanol as a complementary transition fuel for road transportation, integrating evidence on lignocellulosic and residual biomass conversion, ethanol–gasoline blend behavior in spark-ignition (SI) engines, regulated and unregulated emissions, life cycle assessment (LCA), and scalability barriers. A critical narrative and integrative approach were applied, using literature retrieved from Scopus and Web of Science and organized across production pathways, engine performance, environmental impacts, technological challenges, and Latin American deployment conditions. The evidence indicates that advanced bioethanol can valorize agricultural and agro-industrial residues, reduce fossil-carbon dependence, and lower carbon monoxide (CO) and unburned hydrocarbon (HC) emissions in suitable SI engines. However, large-scale implementation remains strongly influenced by pretreatment performance and enzymatic hydrolysis efficiency, together with feedstock logistics, fermentation robustness, ethanol recovery energy demand, and overall biorefinery economics. Life-cycle performance remains pathway-dependent, with potential trade-offs in land use, water demand, toxicity, acidification, and eutrophication. Overall, advanced bioethanol should be understood as a realistic short- to medium-term complement to electrification rather than a universal carbon-neutral solution.


  • Open Access

    Exploratory Analysis of the Interactions Between Territorial Development Patterns and Electricity Demand in Ecuador’s Coastal Region

    by Diego Peña, Jorge Murillo, Fernando Ortega, Yadyra Ortiz, Cristian Laverde-Albarracín, Francisco Jurado

    This study proposes a reproducible exploratory framework to link long-term territorial development with electricity demand in data-scarce contexts, and applies it to Ecuador’s Costa region. The pipeline combines three commonly available input streams: periodic census microdata, an official demand series, and macroeconomic aggregates. Socioeconomic heterogeneity across five non-uniform census rounds (1974, 1982, 1990, 2001, 2010) is summarized through Principal Component Analysis (PCA), and territorial indicators are projected to the demand horizon using a univariate linear trend. Eleven regression specifications are compared on a log-transformed demand variable, and a rolling-origin backtesting scheme plus a 2020–2024 holdout are used for validation. The selected Trend OLS log model attains R2=0.551 and MAPE = 6.08%, and projects a regional demand of approximately 7055 MW by 2050, equivalent to a compound annual growth rate of 3.46%. Beyond the Ecuadorian case, the results show that transparent, low-data pipelines based on harmonized census information, macroeconomic drivers and simple regression models can provide defensible medium- and long-term demand signals for planners in other emerging economies with limited high-frequency data.

  • Open Access

    Decoupled Geometric Measurement and Machine Learning Classification for Automated Post-Harvest Quality Assessment of Ruscus hypophyllum Foliage

    by Fernando Ortega-Loza, Fernando Toapanta-Ramos, Diego Peña, Moad Hicham Safhi, Diego H. Peluffo-Ordóñez

    This paper presents a hybrid computer vision framework that explicitly decouples geometric stem measurement from visual foliage condition classification for automated post-harvest quality assessment of Ruscus hypophyllum ornamental foliage. The proposed approach addresses a gap in the literature where heterogeneous quality attributes are typically treated within a single unified learning framework. In the first stage, stem size is estimated using a pixel-based geometric method that incorporates trigonometric orientation correction and spatial calibration via a reference marker of known length, enabling accurate conversion of image measurements to real-world physical dimensions. In the second stage, foliage condition is classified as good or poor using supervised machine learning models trained on Bag of Features representations extracted with the SIFT descriptor. A dataset of 1233 Ruscus hypophyllum images was acquired under controlled conditions using a consumer-grade smartphone camera and processed using open-source Python 3.11 libraries. Twenty-four classifier configurations across six model families were evaluated using stratified 10-fold cross-validation. The geometric estimation stage achieved a Mean Absolute Error (MAE) of 1.2 mm, a Root Mean Square Error (RMSE) of approximately 1.3 mm, and a size categorization accuracy of 99.84%. For foliage condition classification, the Linear Support Vector Machine achieved the best performance, with an accuracy of 92.4±1.0% and an F1-score of 91.1±1.2%, outperforming all other evaluated configurations. The proposed framework provides an interpretable, computationally efficient, and accessible solution for automated foliage quality grading, with potential applications in export-oriented ornamental foliage processing facilities.

  • Open Access

    Transient Numerical Study of Heat Extraction in Heat Sinks with Sinusoidal Fins Using Perforations

    by Fernando Toapanta-Ramos, Fernando Ortega-Loza, José Erazo, William Diaz

    The increasing power density of modern electronics demands more efficient thermal management. Heat sinks with sinusoidal fins remain understudied, and the combined effect of perforations and variable fin spacing on transient performance has not been systematically quantified. This numerical study, conducted using ANSYS Fluent 2025 R2, analyzes three sinusoidal fin configurations under forced convection (3–5 m/s): solid fins (Case A), perforated fins (Case B), and perforated fins with alternating spacing of 2 mm and 4.5 mm (Case C). The base was maintained at 60 °C during a 20 s transient period. A mesh with an average skewness of less than 0.25 ensured numerical convergence. Case B showed remarkable uniformity in the base temperature (variations < 1 °C), in contrast to Case A (variations of up to 14.17 °C), due to a thermal boundary layer restart effect induced by the perforations. Case C reached the highest heat dissipation temperatures (up to 54.64 °C at 3 m/s), representing a 47.2% increase compared to Case A, indicating more effective heat extraction with this type of separate fin. The critical transient window occurs within the first 5 s (>85% of the total temperature rise). A vertical temperature gradient of 1.19 °C/mm was observed near the base. Although the perforations reduced the heat transfer area by 5.94%, the induced turbulence compensated for this loss. Sinusoidal fins with perforations and variable spacing significantly improve convective heat removal.

  • Open Access

    Decoupled Geometric Measurement and Machine Learning Classification for Automated Post-Harvest Quality Assessment of Ruscus hypophyllum Foliage

    by Fernando Ortega-Loza, Fernando Toapanta-Ramos, Diego Peña, Moad Hicham Safhi, Diego H. Peluffo-Ordóñez

    This paper presents a hybrid computer vision framework that explicitly decouples geometric stem measurement from visual foliage condition classification for automated post-harvest quality assessment of Ruscus hypophyllum ornamental foliage. The proposed approach addresses a gap in the literature where heterogeneous quality attributes are typically treated within a single unified learning framework. In the first stage, stem size is estimated using a pixel-based geometric method that incorporates trigonometric orientation correction and spatial calibration via a reference marker of known length, enabling accurate conversion of image measurements to real-world physical dimensions. In the second stage, foliage condition is classified as good or poor using supervised machine learning models trained on Bag of Features representations extracted with the SIFT descriptor. A dataset of 1,233 Ruscus hypophyllum images was acquired under controlled conditions using a consumer-grade smartphone camera and processed using open-source Python libraries. Twenty-four classifier configurations across six model families were evaluated using stratified 10-fold cross-validation. The geometric estimation stage achieved a Mean Absolute Error (MAE) of 1.2 mm, a Root Mean Square Error (RMSE) of approximately 1.3 mm, and a size categorization accuracy of 99.84%. For foliage condition classification, the Linear Support Vector Machine achieved the best performance, with an accuracy of 92.4 ± 1.0% and an F1-score of 91.1±1.2%, outperforming all other evaluated configurations. The proposed framework provides an interpretable, computationally efficient, and accessible solution for automated foliage quality grading, with potential applications in export-oriented ornamental foliage processing facilities.

  • Open Access

    Exploratory Analysis of the Interactions Between Territorial Development Patterns and Electricity Demand in Ecuador’s Coastal Region

    by Diego Peña, Jorge Murillo, Fernando Ortega, Yadyra Ortiz, Cristian Laverde, Francisco Jurado

    This study proposes a reproducible exploratory framework to link long-term territorial development with electricity demand in data-scarce contexts, and applies it to Ecuador’s Costa region. The pipeline combines three commonly available input streams: periodic census microdata, an official demand series, and macroeconomic aggregates. Socioeconomic heterogeneity across five non-uniform census rounds (1974, 1982, 1990, 2001, 2010) is summarized through Principal Component Analysis (PCA), and territorial indicators are projected to the demand horizon using low-order polynomial functions. Eleven regression specifications are compared on a log-transformed demand variable, and a rollingorigin backtesting scheme plus a 2020–2024 holdout are used for validation. The selected Trend OLS log model attains R2 = 0.551 and MAPE = 6.08%, and projects a regional demand of approximately 6,940 MW by 2050, equivalent to a compound annual growth rate of 3.45%. Beyond the Ecuadorian case, the results show that transparent, low-data pipelines based on harmonized census information, macroeconomic drivers and simple regression models can provide defensible medium- and long-term demand signals for planners in other emerging economies with limited high-frequency data.

  • Redacción científica en la era digital: guía para la escritura de artículos, ponencias y ensayos con herramientas TIC e inteligencia artificial

    by Karyna Michel Calvopiña Coello, Noemí Elizabeth Cadmen Ochoa, Fernando Wladimir Ortega Loza

    Este libro se centra precisamente en la fase de la comunicación escrita. Aquí no se encontrará una guía sobre cómo diseñar un proyecto de investigación o cómo elegir un tipo de muestreo; en cambio, sí se ofrece orientación detallada sobre cómo redactar con claridad y coherencia los distintos apartados de un manuscrito científico. El objetivo es brindar al lector las herramientas necesarias para lograr una redacción de alto nivel, que maximice sus posibilidades de publicación y garantice una adecuada divulgación de su trabajo.

  • Open Access

    Numerical Study of 3D Heat Transfer in Heat Sinks with Circular Profile Fins Using CFD

    by Fernando Toapanta-Ramos, Mayra Guashco Rubio, Fernando Ortega-Loza, William Diaz

    A 3D numerical study using computational fluid dynamics simulations is carried out on a heat sink with circular fins. These devices are used to reject heat on motherboards and graphics cards. The software used in this investigation was ANSYS Fluent-CFD, with energy- and momentum-conservation models, as well as two-equation κ−ϵ turbulence models. Three temperatures are set at the base of the heat sink: 80 °C, 90 °C, and 100 °C; as well as three air velocities for cooling: 10 m/s, 15 m/s, and 20 m/s. The analysis determined that the temperature at the fins depends on the length of time the heat sink is exposed to high temperatures. Furthermore, the temperature in the center of the heat sink is lower than at the edges. On the other hand, the analysis times with periods of 2 s, 5 s, and 10 s, this variable being the most fluctuating since significant changes in the temperature of the fins and the surrounding air are observed; increases are determined ranging from 7.96% for the shortest time of exposure to forced convective air, up to 54.55%, for the longest heat-transfer time. However, in the simulations it was observed that from the eighth second the heat transfer stabilizes.


  • Estudio comparativo de sistemas de energía basados en baterías de ion litio y flujo de vanadio para aplicaciones de generación distribuida.

    by Danner Figueroa Guerra, Jorge Murillo, Fernando Ortega Loza, Cristian Delgado Vera

    La presente investigación se centra en el análisis comparativo de las baterías de ion litio y de flujo de vanadio, evaluando su aplicabilidad en sistemas de generación distribuida. Se utilizó un enfoque descriptivo y exploratorio, con métodos analíticos y comparativos para examinar las características técnicas, económicas y ambientales de ambas tecnologías. La investigación recopiló datos de fuentes académicas y en el análisis de casos de estudio, lo que permitió obtener una visión sobre el rendimiento y la viabilidad de cada tipo de batería. Las conclusiones dan a conocer que, aunque las baterías de ion litio ofrecen ventajas en términos de densidad energética y eficiencia, las baterías de flujo se presentan como una alternativa viable debido a su larga vida útil, menor impacto ambiental y capacidad superior para tolerar descargas profundas. Este aspecto se debe tomar en cuenta en la generación distribuida, donde la estabilidad y la sostenibilidad son primordiales. Se recomienda que la elección debe basarse en las necesidades específicas del sistema energético, priorizando el rendimiento, la sostenibilidad y la seguridad.