Lioul Getachew Alemu
Lioul Getachew Alemu has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Eyob Minbale
Textile and Apparel Merchandising, School of Fashion, Ethiopian Institute of Textile and Fashion Technology (EiTEX), Bahir Dar University, POBox 1037, Bahir Dar, Ethiopia
2 shared publications - Girmaw Yeshanbel Kefale
Leather Engineering Department , Ethiopian Institute of Textile and Fashion Technology , Bahir Dar University , Bahir Dar , Ethiopia , bdu.edu.et
2 shared publications - Alene Eyasu
Department of Textile & Apparel Merchandising Ethiopian Institute of Textile & Fashion Technology, Bahir Dar University Bahir Dar Ethiopia
1 shared publication Anteneh Tilahun
1 shared publication- Berihun Bizuneh
Ethiopian Institute of Textile and Fashion Technology, Bahir Dar University Apparel Faculty
1 shared publication - Biniyam Solomon1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Wiley in Journal of Engineering
- Vol. 2026 (1)
Sustainable Leather Manufacturing: Leveraging the Role of Plant Extracts for a Greener Future
The global leather industry processes about 17 million tons of hides and skins annually, producing approximately 600 million cubic meters of tannery wastewater with pollutant levels often exceeding regulatory standards. The main aim of this review was to synthesize, evaluate, and compile information on the potential of eco‐benign plant phytochemicals by examining their effectiveness at the pretanning, tanning, and wet‐finishing stages of leather processing, employing the PRISMA methodology. The findings confirmed that reductions of 53.56%, 53.13%, 50.92%, and 47.10% in Cl - , TDS, BOD, and COD levels were observed in soaking effluent compared to conventional methods. Additionally, these natural agents replaced toxic chromium salts in tanning, significantly lowering chromium effluent levels and associated environmental hazards. Furthermore, the presence of coloring compounds, essential oils, and waxes has enhanced the fastness and functional properties of the leather at the wet‐finishing stage of leather making. Collectively, the integration of plant‐based phytochemicals at various stages of leather processing presents a sustainable approach that addresses critical environmental concerns while maintaining the quality of leather.
- 1 January 2026
- Published by Wiley in Journal of Engineering
- Vol. 2026 (1)
Open AccessSustainable Leather Manufacturing: Leveraging the Role of Plant Extracts for a Greener Future
The global leather industry processes about 17 million tons of hides and skins annually, producing approximately 600 million cubic meters of tannery wastewater with pollutant levels often exceeding regulatory standards. The main aim of this review was to synthesize, evaluate, and compile information on the potential of eco‐benign plant phytochemicals by examining their effectiveness at the pretanning, tanning, and wet‐finishing stages of leather processing, employing the PRISMA methodology. The findings confirmed that reductions of 53.56%, 53.13%, 50.92%, and 47.10% in Cl - , TDS, BOD, and COD levels were observed in soaking effluent compared to conventional methods. Additionally, these natural agents replaced toxic chromium salts in tanning, significantly lowering chromium effluent levels and associated environmental hazards. Furthermore, the presence of coloring compounds, essential oils, and waxes has enhanced the fastness and functional properties of the leather at the wet‐finishing stage of leather making. Collectively, the integration of plant‐based phytochemicals at various stages of leather processing presents a sustainable approach that addresses critical environmental concerns while maintaining the quality of leather.
- Open Access
- 1 January 2025
- Published by Wiley in Journal of Engineering
- Vol. 2025 (1)
Optimization of Bio‐Based Adhesive Synthesis From Gelatin and Euphorbia abyssinica Latex
This investigation is an attempt to extract bio‐based adhesives from gelatin and plant latex to overcome the negative effects of synthetic adhesives. Since synthetic adhesives (CM‐43) have environmental impact due to resource depletion, production emission, toxicity and pollution, and nonbiodegradability character, bio‐based adhesive utilized renewable resources, which has biodegradability, contains nontoxic chemicals, and has eco‐friendly properties. So, this bio‐based adhesive was extracted by mixing plant resins from Euphorbia abyssinica as additives with gelatin through optimization. The factors in the synthesis of bio‐based adhesive were temperature, time, and concentration with levels of 50°C–60°C, 30–60 min, and 50%–75% gelatin; and the optimum level was found 50°C, 45 min, and 75%, respectively, with the optimum result of 282.12 g gel strength. The characteristics of the resulting bioadhesive were 6.25 cP, 6.85, and 11.53% of viscosity, pH, and moisture content values, respectively. The performance of the bioadhesive was examined in terms of peel and shear strength, and it has an average value of 6.645 N/mm and 198.1 N, respectively. So, this research is aimed at overcoming the environmental burden of synthetic adhesives by the production of alternative bioadhesives from gelatin and plant resin.
- 1 January 2025
- Published by Wiley in Journal of Engineering
- Vol. 2025 (1)
Open AccessOptimization of Bio‐Based Adhesive Synthesis From Gelatin and Euphorbia abyssinica Latex
This investigation is an attempt to extract bio‐based adhesives from gelatin and plant latex to overcome the negative effects of synthetic adhesives. Since synthetic adhesives (CM‐43) have environmental impact due to resource depletion, production emission, toxicity and pollution, and nonbiodegradability character, bio‐based adhesive utilized renewable resources, which has biodegradability, contains nontoxic chemicals, and has eco‐friendly properties. So, this bio‐based adhesive was extracted by mixing plant resins from Euphorbia abyssinica as additives with gelatin through optimization. The factors in the synthesis of bio‐based adhesive were temperature, time, and concentration with levels of 50°C–60°C, 30–60 min, and 50%–75% gelatin; and the optimum level was found 50°C, 45 min, and 75%, respectively, with the optimum result of 282.12 g gel strength. The characteristics of the resulting bioadhesive were 6.25 cP, 6.85, and 11.53% of viscosity, pH, and moisture content values, respectively. The performance of the bioadhesive was examined in terms of peel and shear strength, and it has an average value of 6.645 N/mm and 198.1 N, respectively. So, this research is aimed at overcoming the environmental burden of synthetic adhesives by the production of alternative bioadhesives from gelatin and plant resin.
- Open Access
- 1 January 2024
- Published by Wiley in Journal of Engineering
- Vol. 2024 (1)
Sustainable Supply Chain Management Practice of Ethiopian Textile and Apparel Manufacturing Industry
Next to the oil industry, the apparel industries are strongly criticized for their negative impact on the ecosystem. Due to the current global trend, manufacturing industries are expected to consider sustainability issues beyond conventional business goals. In this regard, the study investigates the Ethiopian apparel and textile manufacturing industries’ sustainable supply chain management (SSCM) practices. A descriptive research design methodology using a cross‐sectional survey was used. Data were collected through self‐administered questionnaires. A simple random sampling technique to decide sample size and a purposive sampling technique to select respondents were employed. A total of 71 participants provided a valid response. The metrics for the survey were developed from different literature, and structural equation modeling was used for data analysis. The results demonstrated that the state of the implementation of SSCM practices by the fashion manufacturing industry in Ethiopia is still in its promising stages. The hypotheses test results showed that SSCM practices positively impact SSCM performance and competitiveness at p values of 0.05, except environmental practices with economic performance. The study provides additional insight into the growing field of literature that examines the relationships among SSCM practices, performance, and competitiveness. The findings offer insight for industrial policymakers to improve sustainability for global competitiveness. The Ethiopian government is making significant efforts to boost the manufacturing sector through the “Let Ethiopia Produce” campaign, and sustainability is among the significant necessities for the global competitiveness of the Ethiopian manufacturing industry.
- 1 January 2024
- Published by Wiley in Journal of Engineering
- Vol. 2024 (1)
Open AccessSustainable Supply Chain Management Practice of Ethiopian Textile and Apparel Manufacturing Industry
Next to the oil industry, the apparel industries are strongly criticized for their negative impact on the ecosystem. Due to the current global trend, manufacturing industries are expected to consider sustainability issues beyond conventional business goals. In this regard, the study investigates the Ethiopian apparel and textile manufacturing industries’ sustainable supply chain management (SSCM) practices. A descriptive research design methodology using a cross‐sectional survey was used. Data were collected through self‐administered questionnaires. A simple random sampling technique to decide sample size and a purposive sampling technique to select respondents were employed. A total of 71 participants provided a valid response. The metrics for the survey were developed from different literature, and structural equation modeling was used for data analysis. The results demonstrated that the state of the implementation of SSCM practices by the fashion manufacturing industry in Ethiopia is still in its promising stages. The hypotheses test results showed that SSCM practices positively impact SSCM performance and competitiveness at p values of 0.05, except environmental practices with economic performance. The study provides additional insight into the growing field of literature that examines the relationships among SSCM practices, performance, and competitiveness. The findings offer insight for industrial policymakers to improve sustainability for global competitiveness. The Ethiopian government is making significant efforts to boost the manufacturing sector through the “Let Ethiopia Produce” campaign, and sustainability is among the significant necessities for the global competitiveness of the Ethiopian manufacturing industry.
- Open Access
- 1 January 2024
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2024 (1)
Toward Sustainable Leather Processing: A Comprehensive Review of Cleaner Production Strategies and Environmental Impacts
Although the leather processing industry is vital in terms of employment creation, revenue generation, consumption of by‐products from the meat industry, and the production of the valuable commodity called leather, the industry is considered “red marked” due to the discharge of solid, liquid, and gaseous wastes from each unit operation. In addition, different cleaner production options were investigated to mitigate the negative effects of the leather industries. Cleaner options in curing were mostly focused on the use of plant extracts and the sodium chloride‐free preservation method, which eliminates the salinity and 70% TDS of the discharged water. The application of enzymes in the soak and unhairing facilitates the operation, reduces COD, BOD, and TDS in the effluent, and yields better results than the conventional method. Saltless and waterless pickling with nonswelling acid and chrome‐free tanning was considered cleaner options for pickling with salts and conventional tanning methods. This article provides an in‐depth analysis and review of conventional leather processing, hazardous chemicals in each unit operation, the environmental impact of conventional operations from curing to tanning, and cleaner leather production approaches in each unit operation.
- 1 January 2024
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2024 (1)
Open AccessToward Sustainable Leather Processing: A Comprehensive Review of Cleaner Production Strategies and Environmental Impacts
Although the leather processing industry is vital in terms of employment creation, revenue generation, consumption of by‐products from the meat industry, and the production of the valuable commodity called leather, the industry is considered “red marked” due to the discharge of solid, liquid, and gaseous wastes from each unit operation. In addition, different cleaner production options were investigated to mitigate the negative effects of the leather industries. Cleaner options in curing were mostly focused on the use of plant extracts and the sodium chloride‐free preservation method, which eliminates the salinity and 70% TDS of the discharged water. The application of enzymes in the soak and unhairing facilitates the operation, reduces COD, BOD, and TDS in the effluent, and yields better results than the conventional method. Saltless and waterless pickling with nonswelling acid and chrome‐free tanning was considered cleaner options for pickling with salts and conventional tanning methods. This article provides an in‐depth analysis and review of conventional leather processing, hazardous chemicals in each unit operation, the environmental impact of conventional operations from curing to tanning, and cleaner leather production approaches in each unit operation.