Arulmurugan Somasundaram
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Arulmurugan Somasundaram has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Johan Siden
Department of Electronics Design, Mid Sweden University, 851 70 Sundsvall, Sweden
2 shared publications - T. R. Suresh Kumar
School of Electronics Engineering, Vellore Institute of Technology, Vellore, India
2 shared publications Zachariah C Alex
School of Electronics Engineering Vellore Institute of Technology Vellore Tamil Nadu India
1 shared publication- Zachariah Callottu Alex
School of Electronics Engineering, Vellore Institute of Technology, Vellore, India
1 shared publication
Latest Publications
- 25 September 2024
- Published by Wiley in International Journal of Communication Systems
- Vol. 38 (3)
Wearable dual‐band dual‐polarized screen‐printed fabric antenna enabled with electromagnetic bandgap structure for ISM and WLAN communications
Summary: A wearable dual‐band dual‐polarized fabric antenna is screen printed on a cotton polyester substrate to operate at the industrial scientific and medical band at 2.45 GHz and wireless local area network at 5.2 GHz. A rectangular slot with a pair of L‐shaped branches are used to excite dual bands. The rectangular slot is used to achieve lower band resonance at 2.45 GHz with linear polarization, and an L‐shaped branch with a stub is used to obtain the circular polarization at 5.2 GHz. A 3 × 3 electromagnetic bandgap (EBG) structure is enabled behind the antenna to minimize the back radiation and specific absorption rate (SAR). The antenna provides a measured impedance bandwidth (BW) of 25% from 2.1 to 2.7 GHz (600 MHz), and 18% from 4.5 to 5.7 GHz (1.2 GHz), respectively. The antenna also has a 3‐dB axial ratio BW of 15% from 4.6 to 5.35 GHz (750 MHz). The antenna exhibits a measured gain of 5.1 dB at 5.2 GHz and 6.4 dB at 2.45 GHz. The SAR is validated by using a CST (computer simulation technology) voxel human body model and found to be 0.0949 and 0.127 W/kg for 1 g tissue at 5.2 and 2.45 GHz, respectively. The dimension of the proposed EBG integrated antenna is (0.52 λ × 0.52 λ × 0.07 λ). The antenna and EBG structure are screen printed with silver conductive ink, which provides good conductivity, conformability, comfort, wearability, and being lightweight.
- 25 September 2024
- Published by Wiley in International Journal of Communication Systems
- Vol. 38 (3)
Wearable dual‐band dual‐polarized screen‐printed fabric antenna enabled with electromagnetic bandgap structure for ISM and WLAN communications
Summary: A wearable dual‐band dual‐polarized fabric antenna is screen printed on a cotton polyester substrate to operate at the industrial scientific and medical band at 2.45 GHz and wireless local area network at 5.2 GHz. A rectangular slot with a pair of L‐shaped branches are used to excite dual bands. The rectangular slot is used to achieve lower band resonance at 2.45 GHz with linear polarization, and an L‐shaped branch with a stub is used to obtain the circular polarization at 5.2 GHz. A 3 × 3 electromagnetic bandgap (EBG) structure is enabled behind the antenna to minimize the back radiation and specific absorption rate (SAR). The antenna provides a measured impedance bandwidth (BW) of 25% from 2.1 to 2.7 GHz (600 MHz), and 18% from 4.5 to 5.7 GHz (1.2 GHz), respectively. The antenna also has a 3‐dB axial ratio BW of 15% from 4.6 to 5.35 GHz (750 MHz). The antenna exhibits a measured gain of 5.1 dB at 5.2 GHz and 6.4 dB at 2.45 GHz. The SAR is validated by using a CST (computer simulation technology) voxel human body model and found to be 0.0949 and 0.127 W/kg for 1 g tissue at 5.2 and 2.45 GHz, respectively. The dimension of the proposed EBG integrated antenna is (0.52 λ × 0.52 λ × 0.07 λ). The antenna and EBG structure are screen printed with silver conductive ink, which provides good conductivity, conformability, comfort, wearability, and being lightweight.
- Open Access
- 12 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 5 (6) , 1805-1814
Circular Polarized Dual-Band Wearable Screen-Printed MIMO Antenna Integrated With AMC for WBAN Communications
A novel dual-band circularly polarized MIMO wearable antenna is screen-printed on a cotton polyester fabric to operate at 2.45 and 5.8 GHz wireless body area network communications. The MIMO fabric antenna is realized with two circularly polarized wearable antennas arranged in orthogonal directions, which provides a less than -10 dB bandwidth of 400 MHz from 2.2 to 2.6 GHz and 800 MHz from 5.3 to 6.1 GHz, with impedance bandwidth of 17 and 14% for lower and higher bands, respectively. The antenna provides an axial ratio bandwidth (below 3 dB) of 3% from 2.4 to 2.47 GHz and 8% from 5.45 to 5.94 GHz. The proposed MIMO antenna is integrated with an artificial magnetic conductor, which helps to create isolation between the human body and antenna, which also minimizes the specific absorption rate (SAR). The antenna SAR performance is tested on the HUGO model, which gives 0.025, 0.035 W/Kg for 1g tissue at 2.45 and 5.8 GHz. Furthermore, the antenna provides good MIMO characteristics such as envelope correlation coefficient, diversity gain, and channel capacity. The antenna is suitable for flexible wearable applications due to fabric substrate, screen printing, low SAR, and lightweight.
- 12 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Antennas and Propagation
- Vol. 5 (6) , 1805-1814
Open AccessCircular Polarized Dual-Band Wearable Screen-Printed MIMO Antenna Integrated With AMC for WBAN Communications
A novel dual-band circularly polarized MIMO wearable antenna is screen-printed on a cotton polyester fabric to operate at 2.45 and 5.8 GHz wireless body area network communications. The MIMO fabric antenna is realized with two circularly polarized wearable antennas arranged in orthogonal directions, which provides a less than -10 dB bandwidth of 400 MHz from 2.2 to 2.6 GHz and 800 MHz from 5.3 to 6.1 GHz, with impedance bandwidth of 17 and 14% for lower and higher bands, respectively. The antenna provides an axial ratio bandwidth (below 3 dB) of 3% from 2.4 to 2.47 GHz and 8% from 5.45 to 5.94 GHz. The proposed MIMO antenna is integrated with an artificial magnetic conductor, which helps to create isolation between the human body and antenna, which also minimizes the specific absorption rate (SAR). The antenna SAR performance is tested on the HUGO model, which gives 0.025, 0.035 W/Kg for 1g tissue at 2.45 and 5.8 GHz. Furthermore, the antenna provides good MIMO characteristics such as envelope correlation coefficient, diversity gain, and channel capacity. The antenna is suitable for flexible wearable applications due to fabric substrate, screen printing, low SAR, and lightweight.