NMNaoki Matsunaga

Naoki Matsunaga

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Naoki Matsunaga has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    In-situ H 2 S annealing for stoichiometric residue-free MoS 2 film formation

    by Naoki Matsunaga, Jaehyo Jang, Soma Ito, Takuya Hoshii, Kuniyuki Kakushima, Hitoshi Wakabayashi

    In-situ H2S annealing for stoichiometric residue-free MoS2 film formation was demonstrated in comparison with conventional sulfur vapor annealing (SVA) using low-vapor-pressure octasulfur. At 600◦C, both annealing methods produced stoichiometric MoS2 films, and the Raman and X-ray diffraction results exhibited higher crystallinity of the H2S-annealed film than that of the SVA-treated film. X- ray photoelectron spectroscopy revealed S-S residue only on the SVA-treated film, accompanied by a Fermi-level shift toward the valence band. A top-gated field-effect transistor (FET) fabricated with the H2S-annealed film exhibited n-type operation.

  • Open Access

    3-step-CVD-MoS 2 film formation from PVD-Mo film via oxygen and sulfur-vapor anneals

    by Shunsuke Nozawa, Naoki Matsunaga, Jaehyo Jang, Takuya Hoshii, Kuniyuki Kakushima, Hitoshi Wakabayashi

    Molybdenum disulfide (MoS 2 ) is a promising candidate channel material for future logic transistors. In this study, a 3-step CVD method with high industrial scalability is investigated, wherein a molybdenum film deposited by sputtering undergoes oxygen annealing followed by sulfur vapor annealing to synthesize an MoS 2 film via a vapor-phase reaction. The successful formation of the MoS 2 film was confirmed using cross-sectional TEM, Raman spectroscopy, in-plane XRD, and XPS. The MoS 2 film deposited by the 3-step CVD also exhibited higher crystallinity than the directly sulfurized Mo film. Furthermore, back-gate field-effect transistors fabricated with these films demonstrated n-type semiconducting characteristics.

  • Open Access

    Zirconium disulfide film improved by hydrogen-sulfide annealing at BEOL-compatible temperature with less surface residual sulfur

    by Taiga Fuse, Naoki Matsunaga, Masaki Otomo, Takuya Hoshii, Kuniyuki Kakushima, Hitoshi Wakabayashi

    Zirconium disulfide (ZrS 2 ) is one of the transition metal dichalcogenides (TMDCs) that is expected to have high mobility. The quality of H 2 S-annealed ZrS 2 films is evaluated through X-ray photoelectron spectroscopy, Raman spectroscopy, and X-ray diffraction. This study reveals that H 2 S annealing on ZrS 2 enhances the crystallinity of ZrS 2 , even at back-end-of-line compatible temperatures, and reduces unintended chemical bonds, such as surface residual sulfur formed during sulfur vapor annealing using a sulfur powder reactant. In conclusion, post-deposition H 2 S annealing effectively improves the quality of ZrS 2 films, thereby broadening their range of applications.

  • Open Access

    N-type charge-transfer doping to physical-vapor-deposited MoS 2 films using atomic-layer-deposited HfO 2 films

    by Shunsuke Nozawa, Jaehyo Jang, Naoki Matsunaga, Taiga Fuse, Takuya Hoshii, Kuniyuki Kakushima, Hitoshi Wakabayashi

    As a two-dimensional (2D) layered material, molybdenum disulfide (MoS 2 ) has attracted attention as a potential channel material for future logic transistors beyond the 1-nm generation. However, despite their suitability for industrial applications, doping techniques for MoS 2 films deposited via sputtering have not been established. In this study, the n-type charge transfer doping of MoS 2 using a HfO 2 film is demonstrated without disrupting its layered structure. A transmission line model devices and transistors were fabricated using MoS 2 films as channels, and obtained a reduced sheet resistance and an n-type transfer curve after HfO 2 film deposition. Our findings are expected to contribute to lowering the resistance of source/drain extensions in future 2D transistors.


  • Open Access

    Stoichiometric and high-crystallinity H 2 S-annealed MoS 2 films via controlled PVD deposition pressure

    by Naoki Matsunaga, Jaehyo Jang, Soma Ito, Kuniyuki Kakushima, Hitoshi Wakabayashi

    The crystallinity of MoS 2 films grown via radio-frequency (RF) magnetron sputtering was systematically investigated as a function of deposition pressure to clarify the effect of plasma-induced damage. Under higher deposition pressures, the kinetic energy of sputtered particles was effectively reduced owing to enhanced gas-phase scattering, which considerably suppressed damage to the substrate and growing MoS 2 as well as undesired nucleation. The Raman spectroscopy, X-ray diffraction (XRD) and transmission electron microscopy consistently revealed that an increase in the deposition pressure up to 1.5 Pa resulted in a pronounced narrowing of the Raman A 1 g peak, XRD 110 reflection, and fast Fourier transform peaks, indicating the enlargement of grain size and improving of crystallinity. The X-ray photoelectron spectroscopy further confirmed that the stoichiometric ratio of S:Mo approached the ideal 2:1 ratio under 1.5 Pa after H 2 S annealing. These results demonstrate that controlling plasma damage through optimized deposition pressure is an effective strategy to achieve high-crystallinity, stoichiometric, physical-vapor-deposited MoS 2 films, which are crucial for integration in high-performance three-dimensionally-stacked field-effect transistor architecture.

  • Open Access

    Crystallinity improvement of physical-vapor-deposited WS2 films by controlling particle energy

    by Soma Ito, Kaede Teraoka, Shinya Imai, Naoki Matsunaga, Jaehyo Jang, Iriya Muneta, Kuniyuki Kakushima, Hitoshi Wakabayashi

    High-crystallinity WS2 thin films are crucial for their applications in next-generation electronic devices, particularly in logic transistors. Consequently, a physical vapor deposition (PVD) is a promising method for achieving such films because of its scalability and precise control over deposition conditions. In this study, WS2 thin film crystallinity has been investigated by controlling particle energy during the PVD process. The scattering of particles is influenced by Ar pressure, in which a throw distance of the particles is determined. The target-substrate (T-S) distance was set in conjunction with the throw distance in terms of the composition and energy of the particles at the surface on the wafer. The crystallinity of the deposited films was assessed through Raman spectroscopy, X-ray photoelectron spectroscopy, and circular transmission line method measurements. Controlling of T-S distance and Ar pressure effectively minimized film damage during the PVD process, resulting in crystallinity improvement. Therefore PVD-WS2 films hold significant potential for various applications in next-generation logic transistors.


  • Open Access

    WS2-contact resistance reduction to nickel by Al2O3 insertion

    by Kaede Teraoka, Shinya Imai, Naoki Matsunaga, Keita Kurohara, Soma Ito, Kuniyuki Kakushima, Hitoshi Wakabayashi

    Metal-insulator-semiconductor (MIS) contact was achieved by inserting an insulator layer between nickel and WS2 films using the physical-vapor-deposition (PVD) method. The insulator of Al2O3 film was successfully deposited even on the PVD-WS2 films through the atomic-layer deposition (ALD) method, as confirmed by a cross-sectional transmission electron microscope (TEM). The contact resistance was measured by varying the thickness of the Al2O3 insulating layer and compared with that of a conventional top contact structure. The results showed that the contact resistance decreased with the insertion of a 0.1-nm-Al2O3 layer, likely because of the effective release of the Fermi level pinning and a consequent reduction in the Schottky barrier height. This conclusion provides valuable insights for future applications in devices such as 3-dimensional-stacked FETs (3DSFETs) with WS2 channels.


  • Open Access

    Impact of Underlying Insulators on the Crystallinity and Antisite Defect Formation in PVD-MoS2 Films

    by Naoki Matsunaga, Shinya Imai, Takanori Shirokura, Yasuhide Mochizuki, Kazuaki Kuwahata, Kazuo Tsutsui, Kuniyuki Kakushima, Hitoshi Wakabayashi

    The effect of different underlying insulators on molybdenum disulfide (MoS2) films deposited using sputtering, which is a physical vapor deposition (PVD) method, was studied. The study reveals that the underlying insulator strongly affects the properties of the deposited PVD-MoS2 films. First, the results suggested the formation of Mo antisites during sputtering deposition, which weaken the Mo–S bonds in the MoS2 film and enhances its carrier density. Second, the crystallinity of the MoS2 films was evaluated on the basis of Raman intensity and fast Fourier transform (FFT) analysises of cross-sectional transmission electron microscopy (TEM) images. Among the samples investigated, MoS2 deposited onto atomic layer deposition (ALD)-SiO2 exhibited the highest crystallinity. These findings highlight the critical role of the underlying insulator in optimizing PVD-MoS2 films for future applications in three-dimensionally stacked field-effect transistors.