HWHaoyu Wang

Haoyu Wang

*This is an algorithmically generated author record based on publicly available information.

Haoyu Wang has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Numerical simulation investigation on influencing factors of liquid film spreading from an oblique jet impinging on a wall

    by Zhenbin Yang, Haifeng Hu, Haoyu Wang, Wei Lu, Yang Yang, Jianwen Yang, Bin Yang

    The spreading behavior of a liquid film formed by oblique jet impingement directly influences the efficiency and uniformity of film cooling in liquid rocket engines. In this study, numerical simulations based on the volume of fluid (VOF) model were conducted, and an experimental system was established to measure film morphology and thickness for validation. The results show good agreement between the simulation and experiment, with relative deviations in film width and thickness of 20% and 10%, respectively, confirming the model's accuracy and applicability. On this basis, the effects of jet velocity, jet angle, jet orifice diameter, and wall contact angle on film spreading characteristics were systematically investigated. The results indicate that the increasing jet velocity and jet orifice diameter significantly increase the liquid film width and length. Increasing the jet angle increases the overall spreading area while reducing its streamwise length and increasing its width. Increasing the contact angle reduces the spreading area. Further sensitivity analysis reveals that the liquid film width is primarily influenced by the jet velocity and jet angle; the liquid film length is jointly determined by the jet velocity and jet orifice diameter; the jet orifice diameter predominantly governs the thickness in the thin-layer zone; and the thickness in the rise zone is jointly controlled by the jet angle and jet orifice diameter. These findings elucidate the key factors governing liquid film spreading characteristics, thereby providing theoretical guidance for the design and optimization of liquid-film cooling in liquid rocket engines.


  • Investigation of droplet splashing behavior during oblique jet impact onto a wall

    by Haoyu Wang, Haifeng Hu, Bin Yang, Jianwen Yang, Yang Yang, Ying Wang

    For the issue of jet impingement on the wall in industrial cooling processes, an experimental setup based on high-speed photography for oblique jet impingement onto the wall was constructed. The experimental focus was on the study of liquid droplet splashing behavior after oblique jet impingement on the wall, discussing the liquid droplet splashing behavior under three jet impingement modes: Rayleigh regime, first wind-induced regime, and secondary wind-induced regime. By employing methods such as trajectory imaging and particle image velocity for liquid droplet parameter image measurement, obtaining the particle size, velocity, and distribution of splashed droplets after oblique jet impact on walls under different working conditions. The impact of jet impingement velocity and angle on droplet splashing parameters was analyzed. The results showed that when the impingement point is before the breakup length, with increasing flow velocity, the surface wave of the liquid column, and the spreading liquid film became more pronounced, but the loss of liquid-phase components due to splashing was relatively small. When the impingement point is after the breakup length, the secondary breakup resulting in a “crown”-shaped liquid film after droplet impingement leads to a significant loss of liquid-phase components through splashing. As the inlet velocity of the jet increases, there is a decreasing trend in droplet size and an increasing trend in droplet velocity. With an increase in jet angle, there is a decreasing trend in droplet size and velocity. Based on the concentration, size, and velocity distribution characteristics of splashing droplets, the area after oblique jet impingement on the wall can be divided into the impingement zone, low-concentration low-velocity zone, high-concentration high-velocity zone, and lateral splashing zone. This has significant implications for understanding the splashing mechanism after oblique jet impingement on the wall and optimizing operating conditions.