WPWenbo Peng

Wenbo Peng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wenbo Peng has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Research on Deicing and Pavement Performance of Spent Coffee Ground Deicing Asphalt Mixtures

    by Wenbo Peng, Yalina Ma, Hezhou Huang, Lei Xi, Lifei Zheng, Zhi Chen, Wentao Li

    To address the challenges of winter pavement icing and the disposal of organic waste, this study developed a sustained-release deicing filler utilizing biochar derived from spent coffee grounds (SCGs). The material was synthesized through high-temperature carbonization, followed by physical adsorption of chloride salts and surface hydrophobic modification to control release rates. The study made asphalt mixtures and replaced normal mineral filler with the SCG material by volume at ratios of 0%, 50%, 75%, and 100% to test road and deicing performance. Wheel-tracking tests showed that the additive improved high-temperature stability and dynamic stability went up by 27.04% at the 75% replacement level. Salt dissolving created voids and slightly lowered water stability at high dosages, but all performance numbers still met the current engineering rules. Rutting slab tests at −5 °C showed the 100% replacement mix cut snow coverage to 11.43% in 60 min and proved it works for deicing. Pull-out tests measure the bond strength between ice and pavement at −5 °C, −7 °C, and −9 °C. The SCG deicing material weakens ice sticking and the bond strength for the 100% group at −5 °C was 0.35 kN, which is about 57.8% lower than the control asphalt. The bond strength of the deicing mix at −9 °C was still lower than the normal mix at −5 °C. This big drop in stickiness means the pavement stops ice from packing hard and makes mechanical removal easier. This study shows that the prepared deicing materials exhibit excellent sustained-release performance and snow-melting efficiency while ensuring satisfactory road performance. SCG deicing materials can effectively reduce snow accumulation on road surfaces in winter, lower the difficulty of ice-layer removal, and realize the sustainable utilization of SCGs.

  • Open Access

    A Multi-Stage Data-Driven Process for Magnetic Azimuth Error Compensation in Horizontal Wells Under Complex Magnetic Environments

    by Jiguo Liu, Xialin Liu, Longhai Wei, Wenbo Peng, Shaobing Hu

    With the increasing use of horizontal wells in oil and gas development, measurement-while-drilling (MWD) systems require higher magnetic azimuth accuracy to ensure precise trajectory control. This study proposes a three-stage magnetic azimuth error compensation method based on multi-station analysis (MSA). First, the OPTICS clustering algorithm is utilized to identify and remove noise points, and ellipse fitting is applied to suppress radial magnetic interference. Second, an improved MSA model incorporating wellbore trajectory constraints is developed to minimize axial interference and enhance correction stability. Finally, a Gaussian Process Regression (GPR) model, using accelerometer and magnetometer data as features, is introduced to model and compensate for residual nonlinear errors. Experimental validation under simulated complex magnetic conditions shows that OPTICS-based preprocessing significantly improves ellipse fitting and reduces hard magnetic interference. The improved MSA lowers the mean azimuth error to approximately 2.5°, while integrating GPR further decreases it to below 0.04°. The proposed GPR model achieves an R2 of 0.99972 and an RMSE of 0.02928° on the test set, confirming its strong nonlinear compensation capability. Overall, the proposed framework effectively suppresses magnetic interference and enhances azimuth accuracy, providing a robust solution for high-precision MWD applications in horizontal wells.


  • Open Access

    Simulation of Snow and Ice Melting on Energy-Efficient and Environmentally Friendly Thermally Conductive Asphalt Pavement

    by Wenbo Peng, Yalina Ma, Lei Xi, Hezhou Huang, Lifei Zheng, Zhi Chen, Wentao Li

    Conventional asphalt pavement snow and ice removal methods suffer from issues such as time-consuming operations, high costs, and pollution from chemical de-icing agents. Commonly used thermally conductive asphalt concrete (TCAC) faces problems including limited filler diversity, high filler content, and elevated costs. To address these challenges, this study developed a thermally conductive asphalt concrete incorporating carbon fiber–silicon carbide composite fillers to provide a low-cost, energy-saving winter pavement snow melting solution and enhance eco-friendly de-icing performance. Finite element simulation software was employed to model its snow and ice melting performance, investigating the factors influencing this capability. Thermal conductivity was measured using the transient plane source (TPS) technique. The results show that with 0.3% carbon fiber, thermal conductivity reaches 1.43 W/(m·°C), 72.3% higher than ordinary asphalt concrete. Finite element simulations in finite element simulation software were used to model snow and ice melting, and strong agreement with field test data (correlation coefficients > 0.9) confirmed model reliability. Then, the finite element simulation software was used to study the effects of wind speed, temperature, laying power, and spacing on the snow and ice melting of TCAC. The simulation results show that the heating rate increases with TCAC thermal conductivity. Raising the power of the embedded carbon fiber heating cord reduces de-icing time but shows a threshold effect. In this study, asphalt pavement with high thermal conductivity was prepared using a low content of thermal conductive filler, providing a theoretical basis for sustainable pavement design, reducing energy use and environmental damage. TCAC technology promotes greener winter road maintenance, offering a low-impact alternative to chemical de-icing, and supports long-term infrastructure sustainability.


  • Open Access

    Optimization and Analysis of Electrical Heating Ice-Melting Asphalt Pavement Models

    by Jiguo Liu, Kai Xu, Zhi Chen, Wenbo Peng, Longhai Wei

    Electrical heating ice removal pavement represents a promising technology for pavement ice melting. Existing studies primarily focus on optimizing cable-heated asphalt pavement through indoor model tests or finite element results. To obtain more accurate and reasonable temperature rise processes and heat transfer results, we propose a new evaluation metric for heat transfer capability and optimization in electric heating asphalt pavement. Firstly, a three-dimensional heat transfer model considering environmental heat exchange is established, and the accuracy of the model is verified by outdoor measured data. A dual-variable control experiment was carried out between the cable buried depth and insulation layer configuration to specifically analyze their influence on the temperature field of the asphalt layer. We further investigated heat transfer performance metrics (entransy dissipation and entransy dissipation thermal resistance), with results indicating that shallower cable burial depths reduce environmental interference on pavement heat transfer; the thermal insulation layer most significantly enhances pavement surface temperature (35.66% improvement) when cables are embedded in the lower asphalt layer. Placing cables within corresponding pavement layers according to burial depth reduces heat transfer loss capacity and thermal resistance, and positioning cables in the lower asphalt layer with a thermal insulation layer significantly decreases thermal resistance in both concrete and lower asphalt layers while reducing heat transfer capacity loss, demonstrating that installing thermal insulation layers under this structure improves heat transfer efficiency. The combined experimental and simulation verification method and fire dissipation evaluation system proposed in this study provide a new theoretical tool and design criterion for the optimization of electric heating road systems.


  • Open Access

    Degradation Characteristics and Mechanisms of Steel Fiber-Reinforced Concrete Linings in Subsea Tunnels: Insights from Accelerated Erosion Tests with Applied Electric Fields

    by Longhai Wei, Jiguo Liu, Heng Shu, Qinglong Cui, Wenbo Peng, Huimin Gong, Yiguo Xue, Min Han

    Understanding the long-term durability and degradation mechanisms of steel fiber-reinforced concrete (SFRC) linings in subsea tunnels is critical for ensuring structural safety, cost effectiveness, and sustainability. This study investigated the degradation characteristics of SFRC with varying fiber contents (0%, 0.35%, 0.55%, and 0.75%) and different acceleration durations, using the applied electric field acceleration method and X-ray CT tests. The experimental results revealed the characteristics of the surface crack distribution and evolution patterns in the SFRC specimens. Furthermore, the similarity between the non-uniform corrosion patterns observed in regard to accelerated corrosion under the applied electric fields and those occurring due to natural degradation was verified. The pore structure characteristics and internal crack development of the SFRC specimens were compared. The study found that the degradation process of the specimens was closely related to the fiber content. The incorporation of steel fibers altered the crack initiation and propagation modes, leading to a more scattered crack distribution. The accelerated corrosion method, employing an applied electric field, successfully simulated the non-uniform corrosion process of reinforcement in SFRC linings in subsea tunnels under natural conditions. Under the influence of a unidirectional chloride ingress source, the pronounced accumulation of corrosion products was observed only on the side of the reinforcement exposed to chloride penetration. This method effectively visualized the chloride penetration path and its impact on reinforcement corrosion, providing valuable insights for the anti-corrosion design of SFRC linings in subsea tunnels.


  • Open Access

    Chloride Corrosion Resistance of Steel Fiber-Reinforced Concrete and Its Application in Subsea Tunnel Linings

    by Jiguo Liu, Longhai Wei, Qinglong Cui, Heng Shu, Wenbo Peng, Huimin Gong, Yiguo Xue, Min Han

    The composite performance of steel fiber-reinforced concrete (SFRC) is excellent, and its application potential in subsea tunnel engineering has gradually emerged. This paper discusses three types of laboratory testing methods for studying the corrosion of SFRC induced by chlorides: the ion diffusion method, electric field migration method, and pre-corrosion method. The similar relationship between short-term accelerated deterioration tests and the natural corrosion process, as well as the experimental setup for simulating the coupling effect of multiple factors, requires further exploration. Furthermore, the mechanisms of steel fibers influencing the chloride corrosion resistance of SFRC are explored from four aspects: type, coating, shape, and dosage. Finally, by examining practical case studies of SFRC in subsea tunnel applications, the challenges posed by the multi-directionality of chloride ion corrosion, the diversity of corrosion sources, and the uneven distribution of steel fibers are highlighted. Future research should focus on enhancing the application of SFRC in subsea tunnel linings. This study provides a reference and basis for promoting the application of SFRC in subsea tunnel engineering and indicates future development directions.


  • Open Access

    A Novel FBG Placement Optimization Method for Tunnel Monitoring Based on WOA and Deep Q-Network

    by Jiguo Liu, Ming Song, Heng Shu, Wenbo Peng, Longhai Wei, Kai Wang

    By employing the whale optimization algorithm’s (WOA) capability to reduce the probability of being stuck in a locally optimal solution, this study proposed an improved WOA-DQN algorithm based on the Deep Q-Network algorithm (DQN). Firstly, the mathematical model of Fiber Bragg Grating (FBG) sensor placement was established to calculate the reward of DQN. Secondly, the effectiveness and applicability of WOA-DQN were validated through experiments in nine cases. It indicated that the algorithm is far superior to other methods (Noisy DQN, Prioritized DQN, DQN, WOA), especially with the learning rate of 0.001, the initial noise 0.4, the hidden layer 3–512, and the updated frequency of 20. Finally, the FBG sensors were placed at [0°, 27°, 30°, 47°, 51°, 111°, 126°, 219°, 221°, 289°] to detect the accurate deformation of the tunnel with the maximum error 8.66 mm, which is better than the traditional placement. In conclusion, the algorithm provides a theoretical foundation for sensor placement and improves monitoring accuracy. It further shows great promise for deformation monitoring in tunnels.


  • Open Access

    Use of Waste Slag and Rubber Particles to Make Mortar for Filling the Joints of Snow-Melting Concrete Pavement

    by Wenbo Peng, Zhiyuan Geng, Xueting Zhang, Qi Zeng, Longhai Wei, Li Zhou, Wentao Li

    Waste slag and rubber particles are commonly used to modify concrete, offering benefits such as reduced cement consumption and lower greenhouse gas emissions during cement production. In this study, these two environmentally friendly, sustainable waste materials were proposed for the preparation of mortar intended for snow-melting pavements. A series of experiments were conducted to evaluate the performance of the material and to determine whether its compressive and flexural strengths meet the requirements of pavement specifications. The mortar’s suitability for snow-melting pavements was assessed based on its thermal conductivity, impermeability, and freeze–thaw resistance. The results indicate that slag, when used in different volume fractions, can enhance the compressive and flexural strength of the mortar. Slag also provides excellent thermal conductivity, impermeability, and resistance to freeze–thaw cycles, contributing to the overall performance of snow-melting pavements. When the slag content was 20%, the performance was optimal, with the compressive strength and flexural strength reaching 58.5 MPa and 8.1 MPa, respectively. The strength loss rate under freeze–thaw cycles was 8.03%, the thermal conductivity reached 2.2895 W/(m * K), and the impermeability pressure value reached 0.5 MPa. Conversely, the addition of rubber particles was found to decrease the material’s mechanical and thermal properties. However, when used in small amounts, rubber particles improved the mortar’s impermeability and resistance to freeze–thaw cycles. When the rubber content was 5% by volume, the impermeability pressure value reached 0.5 MPa, which was 166.7% lower than that of ordinary cement mortar. Under freeze–thaw cycles, the strength loss rate of the test block with a rubber content of 25% volume fraction was 9.83% lower than that of ordinary cement mortar.