Pengyue Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Pengyue Wang has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Xiao Zheng
Shandong jianzhu Univ
2 shared publications Bo Zhang
1 shared publication- Daolu Quan
School of Civil Engineering, Shandong Jianzhu University, Jinan 250101, China
1 shared publication - Hao Lv
College of Safety and Environmental Engineering, Shandong University of Science and Technology, Qingdao, China
1 shared publication Huanwei Wei
1 shared publication- Huanwei Wei
School of Civil Engineering, Shandong Jianzhu University, Jinan 250101, China
1 shared publication
Latest Publications
- Open Access
Multi-Objective Optimization for Cost-Effective Low-Carbon Building Design
Residential buildings account for a substantial share of global energy consumption and carbon emissions. This study proposes a climate-responsive multi-objective optimisation framework for identifying optimal low-carbon residential building designs across eight representative climate zones in Central Africa. The framework combines EnergyPlus building energy simulations with the Non-dominated Sorting Genetic Algorithm II to simultaneously minimise energy consumption, initial investment cost, and operational carbon emissions while satisfying comfort constraints. To further evaluate the economic viability of the optimised solutions, carbon tax and public subsidy scenarios were introduced. The optimised sustainable configurations achieved energy savings of 53.13–59.85% relative to the reference buildings, while photovoltaic integration enabled net-negative operational carbon emissions across all climate zones. The resulting solutions required initial investments of 233.90–295.01 USD/m2, generated life-cycle benefits (LCB) of 28.45–54.81 USD/m2, achieved levelized cost of electricity (LCOE) of 0.06–0.10 USD/kWh, and exhibited payback periods (PBP) of 14–18 years. Under public subsidy scenarios, LCB increased substantially, LCOE decreased to 0.03–0.05 USD/kWh, and PBP was reduced to 6–9 years. These findings demonstrate that integrating climate-responsive design optimisation with policy-based economic incentives provides an effective decision-support framework for balancing energy efficiency, affordability, and carbon mitigation, offering practical guidance for low-carbon residential development in Central Africa.
Open AccessMulti-Objective Optimization for Cost-Effective Low-Carbon Building Design
Residential buildings account for a substantial share of global energy consumption and carbon emissions. This study proposes a climate-responsive multi-objective optimisation framework for identifying optimal low-carbon residential building designs across eight representative climate zones in Central Africa. The framework combines EnergyPlus building energy simulations with the Non-dominated Sorting Genetic Algorithm II to simultaneously minimise energy consumption, initial investment cost, and operational carbon emissions while satisfying comfort constraints. To further evaluate the economic viability of the optimised solutions, carbon tax and public subsidy scenarios were introduced. The optimised sustainable configurations achieved energy savings of 53.13–59.85% relative to the reference buildings, while photovoltaic integration enabled net-negative operational carbon emissions across all climate zones. The resulting solutions required initial investments of 233.90–295.01 USD/m2, generated life-cycle benefits (LCB) of 28.45–54.81 USD/m2, achieved levelized cost of electricity (LCOE) of 0.06–0.10 USD/kWh, and exhibited payback periods (PBP) of 14–18 years. Under public subsidy scenarios, LCB increased substantially, LCOE decreased to 0.03–0.05 USD/kWh, and PBP was reduced to 6–9 years. These findings demonstrate that integrating climate-responsive design optimisation with policy-based economic incentives provides an effective decision-support framework for balancing energy efficiency, affordability, and carbon mitigation, offering practical guidance for low-carbon residential development in Central Africa.
- Open Access
Analytical and Numerical Investigation of Internal Force Distribution in “Pile-Wall” Structures Based on Finite Difference Method
The “pile-wall” structural system involves the use of conventional temporary retaining piles as part of the underground structure during its operational phase. While this approach has been implemented in engineering practice, there is a significant research gap regarding the theoretical and numerical understanding of the internal force distribution and load-sharing characteristics of the “pile-wall” system, especially in relation to the reinforcement bars used as connection nodes at the interface between the retaining piles and basement walls. This study addresses this gap by proposing a composite structural model that integrates an elastic foundation beam with a continuous beam to simulate the mechanical behavior of the “pile-wall” system. A finite difference equation and computational method are developed to analyze the internal forces and displacements in the system during two key stages: excavation and completion of the basement wall construction. The analytical solutions are validated through comparison with finite element simulations, which show a high degree of consistency between the results. The main contributions of this study include the development of a reliable calculation method for analyzing “pile-wall” internal forces and providing new insights into the load-sharing mechanisms of the system. These findings contribute to a deeper understanding of the mechanical behavior of the “pile-wall” structure and offer a solid theoretical foundation for its broader application in engineering design.
Open AccessAnalytical and Numerical Investigation of Internal Force Distribution in “Pile-Wall” Structures Based on Finite Difference Method
The “pile-wall” structural system involves the use of conventional temporary retaining piles as part of the underground structure during its operational phase. While this approach has been implemented in engineering practice, there is a significant research gap regarding the theoretical and numerical understanding of the internal force distribution and load-sharing characteristics of the “pile-wall” system, especially in relation to the reinforcement bars used as connection nodes at the interface between the retaining piles and basement walls. This study addresses this gap by proposing a composite structural model that integrates an elastic foundation beam with a continuous beam to simulate the mechanical behavior of the “pile-wall” system. A finite difference equation and computational method are developed to analyze the internal forces and displacements in the system during two key stages: excavation and completion of the basement wall construction. The analytical solutions are validated through comparison with finite element simulations, which show a high degree of consistency between the results. The main contributions of this study include the development of a reliable calculation method for analyzing “pile-wall” internal forces and providing new insights into the load-sharing mechanisms of the system. These findings contribute to a deeper understanding of the mechanical behavior of the “pile-wall” structure and offer a solid theoretical foundation for its broader application in engineering design.
- Open Access
- 1 January 2024
- Published by Wiley in Advances in Civil Engineering
- Vol. 2024 (1)
Research on Load Bearing and Deformation Behavior of “Pile–Wall” Retaining Structure
The “pile–wall” structure, which considers conventional temporary retaining piles as parts of the underground structure in the normal working stage, has been practiced, but there are insufficient studies on the optimization of the design of the “pile–wall” structure and the influence of various factors on the structural stresses and deformations. In order to analyze the factors affecting the stresses and deformations of the “pile–wall” structure, the numerical simulation of the “pile–wall” structure was carried out with the help of finite element simulation software Plaxis 3D through the excavation of Wuhan Optics Valley Center City Distributed Energy Project. The research of stresses and displacements on the “pile–wall” structural under the influence of different factors were carried out. The results show that the number of pile–wall connection nodes, the pile–wall thickness ratio, and the pile–wall stiffness ratio have influences on the stresses and deformations of the “pile–wall” structure. The number of connection nodes which is 4, the pile–wall thickness ratio which is 1 : 0.3, and the pile–wall stiffness ratio which is 1 : 1 are the most reasonable for the deformation and force of pile–wall structure in the project. The research results have good reference and guiding significance for the actual “pile–wall” excavation engineering structure, and the purpose of energy‐saving and consumption‐reducing construction can be achieved by seeking the reasonable values of the three and optimizing the construction program.
- 1 January 2024
- Published by Wiley in Advances in Civil Engineering
- Vol. 2024 (1)
Open AccessResearch on Load Bearing and Deformation Behavior of “Pile–Wall” Retaining Structure
The “pile–wall” structure, which considers conventional temporary retaining piles as parts of the underground structure in the normal working stage, has been practiced, but there are insufficient studies on the optimization of the design of the “pile–wall” structure and the influence of various factors on the structural stresses and deformations. In order to analyze the factors affecting the stresses and deformations of the “pile–wall” structure, the numerical simulation of the “pile–wall” structure was carried out with the help of finite element simulation software Plaxis 3D through the excavation of Wuhan Optics Valley Center City Distributed Energy Project. The research of stresses and displacements on the “pile–wall” structural under the influence of different factors were carried out. The results show that the number of pile–wall connection nodes, the pile–wall thickness ratio, and the pile–wall stiffness ratio have influences on the stresses and deformations of the “pile–wall” structure. The number of connection nodes which is 4, the pile–wall thickness ratio which is 1 : 0.3, and the pile–wall stiffness ratio which is 1 : 1 are the most reasonable for the deformation and force of pile–wall structure in the project. The research results have good reference and guiding significance for the actual “pile–wall” excavation engineering structure, and the purpose of energy‐saving and consumption‐reducing construction can be achieved by seeking the reasonable values of the three and optimizing the construction program.