Mostafa I. Mohamed
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mostafa I. Mohamed has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Aurélien Coillet
Université Bourgogne Europe
5 shared publications - Philippe Grelu
Laboratoire ICB UMR 6303 CNRS Université Bourgogne Europe Dijon France
5 shared publications Amala Jose
Indian Institute of Technology Hyderabad
1 shared publication- Kanagaraj Nithyanandan
Indian Institute of Technology Hyderabad
1 shared publication Mincheng Tang
Femto Easy – SAS, Batiment Gienah
1 shared publicationPatrice Tchofo Dinda
Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR CNRS 6303, Université Bourgogne Europehttps://ror.org/00g700j37, 9 Avenue Alain Savary, 21000 Dijon, France
1 shared publication
Latest Publications
- 9 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Lasers à fibre ultrarapides à gestion d’énergie : une approche pour la flexibilité et la mise à l’échelle énergétique des impulsions
Energy-managed ultrafast fiber lasers : an approach to pulse flexibility and energy scaling: Les lasers à fibre ultrarapides se sont imposés comme des sources d’impulsions optiques ultracourte, compactes, efficaces et robustes. Les premiers développements, réalisés autour de la longueur d’onde de 1 µm, ont bénéficié de la dispersion normale des fibres de silice, qui favorise la formation d'impulsions étirées temporellement, permettant ainsi d'augmenter leur énergie. Le développement de nouvelles architectures de cavités laser, combiné au développement de fibres à grande aire de mode, ont permis de dépasser la limite solitonique conventionnelle. Cependant, l’extension de ces concepts vers le moyen infrarouge a présenté de nouveaux défis. Au-delà de 1,3 µm, les fibres de silice présentent une dispersion anormale, ce qui complique le fonctionnement en régime d’impulsions étalées et limite l’augmentation d’énergie en raison des petits diamètres de cœur nécessaires pour maintenir la dispersion normale.Cette thèse introduit le régime du soliton à gestion d’énergie (EMS) comme une approchealternative pour l’augmentation d’énergie dans les lasers à fibre entièrement en dispersion anormale. Le concept a d’abord été démontré à 1,55 µm puis étendu à 2 µm, confirmant son universalité.L’approche a ensuite été développée afin d’introduire deux nouveaux régimes de fonctionnement, l'un sans effet dispersif et l'autre fortement dispersif, dans lesquels l’interaction entre le gain, la non-linéarité et le filtrage spectral permet la formation d’impulsions stables et de haute énergie. Elle a également été étendue au domaine spatial grâce à l’utilisation de fibres actives multimodes, où les interactions spatio-temporelles offrent un contrôle supplémentaire sur la mise en forme et l’amplification des impulsions.Enfin, la sortie du laser a été directement utilisée pour générer un supercontinuum multi-octave sur puce, validant ainsi l’efficacité du concept de gestion d’énergie pour les applications photoniques intégrées.
- 9 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Lasers à fibre ultrarapides à gestion d’énergie : une approche pour la flexibilité et la mise à l’échelle énergétique des impulsions
Energy-managed ultrafast fiber lasers : an approach to pulse flexibility and energy scaling: Les lasers à fibre ultrarapides se sont imposés comme des sources d’impulsions optiques ultracourte, compactes, efficaces et robustes. Les premiers développements, réalisés autour de la longueur d’onde de 1 µm, ont bénéficié de la dispersion normale des fibres de silice, qui favorise la formation d'impulsions étirées temporellement, permettant ainsi d'augmenter leur énergie. Le développement de nouvelles architectures de cavités laser, combiné au développement de fibres à grande aire de mode, ont permis de dépasser la limite solitonique conventionnelle. Cependant, l’extension de ces concepts vers le moyen infrarouge a présenté de nouveaux défis. Au-delà de 1,3 µm, les fibres de silice présentent une dispersion anormale, ce qui complique le fonctionnement en régime d’impulsions étalées et limite l’augmentation d’énergie en raison des petits diamètres de cœur nécessaires pour maintenir la dispersion normale.Cette thèse introduit le régime du soliton à gestion d’énergie (EMS) comme une approchealternative pour l’augmentation d’énergie dans les lasers à fibre entièrement en dispersion anormale. Le concept a d’abord été démontré à 1,55 µm puis étendu à 2 µm, confirmant son universalité.L’approche a ensuite été développée afin d’introduire deux nouveaux régimes de fonctionnement, l'un sans effet dispersif et l'autre fortement dispersif, dans lesquels l’interaction entre le gain, la non-linéarité et le filtrage spectral permet la formation d’impulsions stables et de haute énergie. Elle a également été étendue au domaine spatial grâce à l’utilisation de fibres actives multimodes, où les interactions spatio-temporelles offrent un contrôle supplémentaire sur la mise en forme et l’amplification des impulsions.Enfin, la sortie du laser a été directement utilisée pour générer un supercontinuum multi-octave sur puce, validant ainsi l’efficacité du concept de gestion d’énergie pour les applications photoniques intégrées.
- Open Access
- 5 November 2025
- Published by Wiley in Laser & Photonics Reviews
- Vol. 20 (6)
Dispersion‐Less Dissipative Soliton Fiber Laser
Dispersion engineering has been instrumental in promoting, through intracavity pulse stretching, the generation of higher‐energy mode‐locked pulses. Such approach requires extra‐cavity compression and struggles to deliver bell‐shaped pulses. However, in the context of dissipative solitons, it is also possible to generate energetic, pedestal‐free pulses in the quasi‐absence of dispersive linear effects. We achieve the latter by tailoring picosecond pulses through spectral filtering, inspired by the recently reported energy‐managed soliton laser architecture. The present dispersion‐less energy‐managed mode‐locked fiber laser demonstrates remarkable flexibility in both pulse energy and duration. Its experimental validation, using standard telecom components in the telecom window, yields mode‐locked pulses of up to at a repetition rate of 1.9 MHz. We introduce an additional energy scaling by incorporating a few‐mode gain fiber to generate pulses featuring low spectral distortion.
- 5 November 2025
- Published by Wiley in Laser & Photonics Reviews
- Vol. 20 (6)
Open AccessDispersion‐Less Dissipative Soliton Fiber Laser
Dispersion engineering has been instrumental in promoting, through intracavity pulse stretching, the generation of higher‐energy mode‐locked pulses. Such approach requires extra‐cavity compression and struggles to deliver bell‐shaped pulses. However, in the context of dissipative solitons, it is also possible to generate energetic, pedestal‐free pulses in the quasi‐absence of dispersive linear effects. We achieve the latter by tailoring picosecond pulses through spectral filtering, inspired by the recently reported energy‐managed soliton laser architecture. The present dispersion‐less energy‐managed mode‐locked fiber laser demonstrates remarkable flexibility in both pulse energy and duration. Its experimental validation, using standard telecom components in the telecom window, yields mode‐locked pulses of up to at a repetition rate of 1.9 MHz. We introduce an additional energy scaling by incorporating a few‐mode gain fiber to generate pulses featuring low spectral distortion.
- 23 September 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (19) , 6101-6104
Highly dispersive energy-managed soliton fiber laser
We present a 2-μm all-fiber laser in which a highly chirped fiber Bragg grating (CFBG) sets the net cavity dispersion to −100.9 ps2. Within an energy-managed laser architecture, this large anomalous dispersion enables the mode-locking of energetic and narrow-band pulses featuring: 17.8 nJ energy, 15.2 ps duration, and 0.36 nm bandwidth. These results validate that mode-locked laser oscillators incorporating CFBGs can generate picosecond pulses in the 2-μm wavelength region and demonstrate that, when combined with energy management, simultaneous scaling of pulse duration and energy is achieved. Experimental observations are well reproduced by numerical simulations.
- 23 September 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (19) , 6101-6104
Highly dispersive energy-managed soliton fiber laser
We present a 2-μm all-fiber laser in which a highly chirped fiber Bragg grating (CFBG) sets the net cavity dispersion to −100.9 ps2. Within an energy-managed laser architecture, this large anomalous dispersion enables the mode-locking of energetic and narrow-band pulses featuring: 17.8 nJ energy, 15.2 ps duration, and 0.36 nm bandwidth. These results validate that mode-locked laser oscillators incorporating CFBGs can generate picosecond pulses in the 2-μm wavelength region and demonstrate that, when combined with energy management, simultaneous scaling of pulse duration and energy is achieved. Experimental observations are well reproduced by numerical simulations.
- 1 May 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (9) , 3098-3101
Few-mode energy-managed soliton fiber laser
We present an all-anomalous mode-locked laser architecture combining a few-mode gain fiber with single-mode passive fibers. This hybrid fiber laser generates high-energy pulses whose features are controlled by an intracavity spectral filter. Using a 1.7-nm filter bandwidth, the laser delivers 2.5-ps pulses of 39-nJ energy and 15.6-kW peak power. Increasing the filter bandwidth to 12 nm, the laser delivers nearly Fourier-transform limited 230-fs soliton pulses with 2.1-nJ pulse energy and 9-kW peak power. These results validate the scalability and flexibility of the energy-managed soliton laser approach for generating high-energy dissipative solitons in the anomalous dispersion regime with adjustable duration.
- 1 May 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (9) , 3098-3101
Few-mode energy-managed soliton fiber laser
We present an all-anomalous mode-locked laser architecture combining a few-mode gain fiber with single-mode passive fibers. This hybrid fiber laser generates high-energy pulses whose features are controlled by an intracavity spectral filter. Using a 1.7-nm filter bandwidth, the laser delivers 2.5-ps pulses of 39-nJ energy and 15.6-kW peak power. Increasing the filter bandwidth to 12 nm, the laser delivers nearly Fourier-transform limited 230-fs soliton pulses with 2.1-nJ pulse energy and 9-kW peak power. These results validate the scalability and flexibility of the energy-managed soliton laser approach for generating high-energy dissipative solitons in the anomalous dispersion regime with adjustable duration.
- 13 November 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (22) , 6537-6540
2-µm energy-managed soliton fiber laser
To generate energetic short pulses from fiber laser oscillators in the 2-µm emission window, we here propose an alternative to the conventional methods of pulse stretching and dispersion management. We build a passively mode-locked fiber laser from anomalous single-mode fibers and utilize strong dissipative effects to delineate high and low pulse energy sections within the cavity. Whereas the main laser output delivers low-chirp sub-ps pulses with an energy up to 12 nJ, the intracavity pulse is reshaped into a ∼0.1-nJ conventional soliton, stabilizing the laser dynamics while enabling a wide tunability in both repetition rate and central emission wavelength.
- 13 November 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (22) , 6537-6540
2-µm energy-managed soliton fiber laser
To generate energetic short pulses from fiber laser oscillators in the 2-µm emission window, we here propose an alternative to the conventional methods of pulse stretching and dispersion management. We build a passively mode-locked fiber laser from anomalous single-mode fibers and utilize strong dissipative effects to delineate high and low pulse energy sections within the cavity. Whereas the main laser output delivers low-chirp sub-ps pulses with an energy up to 12 nJ, the intracavity pulse is reshaped into a ∼0.1-nJ conventional soliton, stabilizing the laser dynamics while enabling a wide tunability in both repetition rate and central emission wavelength.
- Open Access
- 15 October 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-10
Energy-managed soliton fiber laser
Ultrafast fiber lasers constitute a flexible platform to investigate new solitary wave concepts. To surpass the low energy limitation of the conventional solitons generated in standard telecom fibers, successive breakthroughs have promoted the usage of an important frequency chirping within fiber oscillators. This lead to original solitary wave regimes such as stretched-pulse, all-normal-dispersion, and self-similar dynamics. We here revisit ultrafast fiber lasers built from standard optical fibers featuring solely anomalous dispersion. We propose a new cavity design enhancing key dissipative effects with contained frequency chirping and demonstrate the generation of high energy pulses in the few-picoseconds regime. The involved intracavity dynamics blends conventional and dissipative soliton features in an unseen way with low- and high-energy propagation regions, allowing an increased flexibility and novel scalability prospects.
- 15 October 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-10
Open AccessEnergy-managed soliton fiber laser
Ultrafast fiber lasers constitute a flexible platform to investigate new solitary wave concepts. To surpass the low energy limitation of the conventional solitons generated in standard telecom fibers, successive breakthroughs have promoted the usage of an important frequency chirping within fiber oscillators. This lead to original solitary wave regimes such as stretched-pulse, all-normal-dispersion, and self-similar dynamics. We here revisit ultrafast fiber lasers built from standard optical fibers featuring solely anomalous dispersion. We propose a new cavity design enhancing key dissipative effects with contained frequency chirping and demonstrate the generation of high energy pulses in the few-picoseconds regime. The involved intracavity dynamics blends conventional and dissipative soliton features in an unseen way with low- and high-energy propagation regions, allowing an increased flexibility and novel scalability prospects.