TLTingting Li

Tingting Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tingting Li has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Pore Pressure Prediction in Tight Sandstone Reservoirs with a Hybrid BiLSTM-CNN Model

    by Songyang Gao, Haibo Zhao, Shujun Yin, Junyuan Fan, Jinbiao Gao, Yongqiang Zhao, Yuting Zhou, Tingting Li, Wenhao Xia, Xiaolei Yang, et al.

    Accurate pore pressure estimation in tight sandstone reservoirs is hampered by the limited sensitivity of conventional approaches, which rely on a single acoustic or resistivity log and assume shale undercompaction as the dominant overpressure mechanism. This study develops a hybrid BiLSTM-CNN model that integrates multi-parameter well-log responses to predict pore pressure equivalent density in the Upper Triassic XJH Formation of the northeastern Sichuan Basin, a tight sandstone succession deposited at the end of the Late Triassic. Downhole pressure measurements from five wells and their corresponding logging curves were compiled, yielding 2163 data points after outlier filtering and missing-value interpolation. Grey relational analysis (GRA) ranked six logging parameters—acoustic transit time, bulk density, invaded-zone resistivity, compressional slowness, deep lateral resistivity, and gamma ray—as the most informative model inputs. The network couples a two-layer BiLSTM with 64 hidden units per layer for bidirectional depth-sequence modeling and three parallel one-dimensional convolutional branches with dilation rates of 1, 2, and 3 for multi-scale local feature extraction. The model of test data achieved R2 = 0.968, RMSE = 0.0147 g/cm3, and MAE = 0.0116 g/cm3, outperforming four benchmark algorithms (BP, KNN, GBRT, and SVR). Predicted pressure profiles for a verification well reproduced lithologically controlled pressure contrasts between sandstone and mudstone members. Spatial pressure maps for the X2, X4, and X6 intervals, generated by interpolating predictions across multiple wells, show that overpressured zones coincide with greater burial depth and stronger top-seal integrity. These findings demonstrate that coupling depth-directional sequence learning with multi-scale convolutional feature extraction offers a reliable data-driven framework for pore pressure characterization in low-porosity clastic systems.

  • Open Access

    Distinguishing Geometric and Apparent Relaxation–Response Fractal Parameters in Fuyu Formation Tight–to–Low–Permeability Sandstones: A Comparative MICP–NMR Framework

    by Mengying Wang, Chengwu Xu, Tingting Li, Hongyu Li, Hao Wang

    Fractal analysis has been widely applied to characterize the complexity of pore systems in tight sandstone reservoirs. However, fractal parameters derived from different experimental techniques are frequently interpreted without sufficient consideration of their distinct physical meanings. In this study, tight sandstones from the Fuyu Formation in the Songliao Basin were investigated using cast thin sections, scanning electron microscopy, high–pressure mercury intrusion porosimetry, and nuclear magnetic resonance. The objective was to establish a comparative interpretation framework that distinguishes capillary–pressure–controlled geometric fractal dimensions from NMR–derived apparent relaxation–response fractal parameters (ARR fractal parameters). The pore–throat system is dominated by medium– to fine–sized throats, with the dominant pore–throat radii concentrated between 0.05 and 0.15 μm. Mercury–intrusion–derived fractal parameters primarily characterize the geometric heterogeneity of relatively large and fine pore–throat systems, whereas NMR–derived parameters mainly reflect the apparent relaxation response associated with pore–scale fluid occurrence rather than strict geometric complexity. In the present MICP–NMR subset, comparative regression trends indicate that the geometric fractal parameter representing fine pore throats is more responsive to median pore–throat radius and movable–fluid saturation, whereas the NMR–derived apparent relaxation–response parameter associated with longer relaxation times shows a relatively closer relationship with log–transformed permeability. These relationships should be regarded as exploratory response trends rather than universal predictive models. These findings demonstrate that the two types of fractal parameters provide complementary rather than interchangeable information for reservoir evaluation. The proposed comparative framework offers a physically constrained basis for integrating pore–throat geometry, relaxation response, fluid occurrence, and seepage properties in the characterization of tight sandstone reservoirs.

  • Open Access

    Real Missing-Region-Constrained Self-Supervised Inpainting for Borehole Electrical Imaging Logs

    by Chuanhao Li, Chengwu Xu, Tingting Li, Qi Yao, Mengying Wang

    Borehole electrical imaging logs provide important sensor-derived information for identifying fractures, bedding structures, and reservoir heterogeneity. However, strip-like missing regions commonly arise from uneven tool pad distribution, incomplete borehole coverage, and acquisition limitations, which can distort geological structures and reduce interpretation reliability. Because the true values inside real missing regions are unobservable, complete ground-truth labels are generally unavailable. This study therefore proposes a real missing-region-constrained self-supervised inpainting framework for borehole electrical imaging logs. The key idea is to use real missing masks to define safe intact regions and to generate artificial strip-like training masks only within those reliable regions, thereby avoiding supervision contamination from originally missing or adjacent unstable areas. A UNet-based inpainting model is developed, and two attention-enhanced variants, UNet-SE and UNet-CBAM, are evaluated together with Telea and Navier–Stokes baselines. In addition to the main comparison, mask-level ablation, model-level ablation, repeated-seed robustness analysis, and lightweight expert-assisted geological assessment are used to examine the reliability of the proposed strategy. The results show that learning-based methods consistently outperform conventional approaches for structurally complex strip-like gaps. UNet-CBAM achieves the best overall performance, with mask-MAE, mask-PSNR, and mask-SSIM values of 14.8, 21.2 dB, and 0.8, respectively. The safe-region-constrained strategy further reduces supervision contamination and improves reconstruction quality compared with random or less restrictive mask-generation strategies. These findings indicate that the proposed framework offers a practical self-supervised solution for improving the quality and interpretability of sensor-captured borehole imaging logs when complete labels are unavailable.

  • Open Access

    Thermomechanically Constrained Fractal Evolution of Pore–Fracture Networks in Low-Maturity Shale under Conventional Triaxial In Situ Conditions

    by Chengwu Xu, Qi Yao, Chuanhao Li, Tingting Li, Hongyu Li, Mengying Wang, Junhao Hu, Bo Gao, Guanzheng Zuo, Yujia Han

    During the in situ thermal upgrading of low-maturity shale, the reorganization of the pore-fracture system directly controls reservoir connectivity and hydrocarbon migration efficiency. However, under true triaxial stress constraints, the thermo-mechanical coupling mechanisms and the overall structural complexity evolution remain insufficiently understood. In this study, low-maturity organic-rich shale from the Jitunjun Formation in the Fushun Basin was subjected to in situ heating experiments under true triaxial conditions. Multiscale characterization methods, including scanning electron microscopy (SEM), low-temperature gas adsorption, and high-pressure mercury intrusion, were employed to investigate the pore-structure evolution at different temperature stages. Fractal parameters across multiple pore-size ranges were derived by using the FHH model and mercury intrusion fractal models. A pore-volume-weighted comprehensive fractal dimension (Dcomp) was further constructed to achieve unified quantification of pore-fracture network complexity over the full pore-size spectrum. The results show that micropore variation is limited, mesopores develop significantly at 350–450 °C, and macropores continuously increase with temperature, playing a dominant role in connectivity enhancement. The pore system exhibits stable bifractal behavior. Dcomp is positively correlated with the specific surface area and total pore volume and negatively correlated with average pore size, indicating that structural complexity is primarily controlled by the development of mesopores to macropores and increasing diversity of connectivity pathways. Integrated analysis identifies 400–500 °C as the critical temperature interval during which the pore-fracture network transitions from local connectivity to a multiscale interconnected system. This study confirms the applicability of fractal theory under true triaxial in situ thermomechanical conditions and provides a quantitative framework for evaluating thermal upgrading effectiveness and optimizing reservoir structure.


  • Open Access

    Lamination-Controlled Lithofacies Differentiation and Shale Oil Enrichment: A Case Study of the Qingshankou Formation, Songliao Basin

    by Qi Yao, Chengwu Xu, Tingting Li, Chuanhao Li, Hongyu Li, Mengying Wang, Junhao Hu, Bo Gao, Guanzheng Zuo, Yujia Han

    Organic-rich shales of Cretaceous age are widely developed in the Qian’an area of the Songliao Basin and represent an important exploration target for continental shale oil in China. However, due to complex depositional environments, diverse lithological assemblages, and strong lamination-related heterogeneity, the characteristics of reservoir space and their controlling factors among different lithofacies remain poorly constrained. This study aims to clarify the differences in reservoir space among various laminated shale lithofacies and to elucidate their formation mechanisms, thereby providing a geological basis for identifying favorable lithofacies in continental shale oil systems. Shales of the Qingshankou Formation in the Qian’an area were investigated through detailed core observations combined with thin-section petrography, scanning electron microscopy (SEM), X-ray diffraction (XRD), Rock–Eval pyrolysis, high-pressure mercury intrusion, low-temperature nitrogen adsorption, and laser confocal microscopy. Based on these integrated data sets, laminated shales were systematically classified into lithofacies, and the pore structure characteristics and controlling factors of different lithofacies were comparatively analyzed. The results indicate that the Qingshankou Formation shales are lithologically heterogeneous and well laminated and are generally characterized by low porosity and low permeability, with pronounced variations in reservoir properties under different depositional settings. Using an integrated hierarchical classification scheme based on lithology/mineral composition, sedimentary structure, and total organic carbon (TOC) content, eight lithofacies were identified, including clay-rich shale with high-density lamination and high TOC, felsic-rich shale with high-density lamination and high TOC, felsic-rich shale with low-density lamination and moderate TOC, felsic-rich shale with low-density lamination and low TOC, massive mud shale with low TOC, bedded siltstone with low TOC, bedded bioclastic limestone with moderate TOC, and bedded dolostone with moderate TOC. Significant differences in pore types, pore structure, and oil-bearing properties are observed among the identified lithofacies. Among them, the low-TOC bedded siltstone lithofacies exhibit the most favorable reservoir performance, characterized by abundant interparticle pores, dissolution pores and fractures, well-developed pore connectivity, and relatively high oil saturation. The formation and evolution of shale reservoir space are jointly controlled by mineral composition, organic matter abundance, and lamination development. TOC exerts a persistent control on micropore development throughout thermal evolution, whereas rigid detrital grains such as quartz and feldspar within silt-rich laminae form grain-supported frameworks that effectively preserve interparticle pores during compaction, thereby increasing the proportion of meso- to macropores and promoting shale oil enrichment. These results demonstrate that the enrichment potential of laminated shale oil systems is controlled by a multiscale coupling process linking lamina attributes, lithofacies architecture, and formation-scale source–reservoir configuration, rather than by organic matter abundance alone. This insight provides valuable implications for the identification of favorable lithofacies and shale oil exploration and development in the Qingshankou Formation and other continental shale oil basins.


  • Open Access

    Differential reservoir formation mechanisms of shale oil reservoirs in the Qingshankou Formation, Cretaceous system, Songliao Basin

    by Yao Qi, Xu Chengwu, Li Tingting, Shao Shiguo, Li Chuanhao, Wang Mengying, Zheng Yunheng, Liu Xiaoxuan

    To investigate the lithofacies assemblages, reservoir types, oil content, and mobility of shale oil reservoirs in the Cretaceous Qingshankou Formation of the Songliao Basin, a comprehensive set of analyses was conducted, including thin-section mosaic imaging, argon-ion-polished field-emission scanning electron microscopy (FE-SEM), whole-rock X-ray diffraction (XRD), total organic carbon (TOC) determination, petrophysical analysis, and laser confocal microscopy (CLSM). These methods were used to systematically characterize the reservoir development features and differential formation mechanisms of shale reservoirs in the Qingshankou Formation. The results indicate that: (1) the shale reservoirs are characterized by high feldspar content, high clay mineral content, and moderate carbonate mineral content. Feldspar mainly occurs in banded patterns, whereas carbonate minerals are mainly present as micrite, nodular aggregates, and banded structures; (2) shale laminations are poorly developed and show limited diversity, being mainly composed of felsic and carbonate laminations, whereas bioclastic laminations are rare. The mineral assemblages of shale laminations are dominated by two types: “felsic minerals + clay minerals” and “carbonate minerals + clay minerals”; (3) the shale succession mainly consists of two lithofacies, namely massive felsic mudstone and laminated felsic shale. Reservoir space is dominated by intergranular pores associated with clay minerals, whereas lamination-related fractures and high-angle fractures are only weakly developed. Locally, a small number of dissolution pores, intergranular pores, and organic pores can be observed; (4) shale oil mainly occurs in a dispersed state, with light/heavy ratios ranging from 0.45 to 0.57; and (5) sedimentary environment controls lithofacies assemblages, diagenesis controls pore evolution, tectonic activity controls fracture development, and hydrocarbon-generation and thermal-evolution history controls hydrocarbon occurrence and distribution.


  • Open Access

    Prediction of Total Organic Carbon Content in Shale Based on PCA-PSO-XGBoost

    by Yingjie Meng, Chengwu Xu, Tingting Li, Tianyong Liu, Lu Tang, Jinyou Zhang

    Total organic carbon (TOC) content is an important parameter for evaluating the abundance of organic matter in, and the hydrocarbon production capacity, of shale. Currently, no prediction method is applicable to all geological conditions, so exploring an efficient and accurate prediction method suitable for the study area is of great significance. In this study, for the shale of the Qingshankou Formation of the Gulong Sag in the Songliao Basin, TOC content prediction models using various machine learning algorithms are established and compared based on measured data, principal component analysis, and the particle swarm optimization algorithm. The results showed that GR, AC, DEN, CNL, LLS, and LLD are the most sensitive parameters using the Pearson correlation coefficient. The four principal components were also identified as input features through PCA processing. The XGBoost prediction model, established after selecting the parameters through PSO intelligence, had the highest accuracy with an R2 and RMSE of 0.90 and 0.1545, respectively, which are superior to the values of the other models. This model is suitable for the prediction of TOC content and provides effective technical support for shale oil exploration and development in the study area.


  • Open Access

    Stratigraphic Division Method Based on the Improved YOLOv8

    by Lu Tang, Tingting Li, Chengwu Xu

    With the deepening of oilfield development, logging data proliferate, and their complexity makes manual stratigraphic division both difficult and time-consuming. Aimed at the current network model widely used to solve the problem of stratigraphic delineation, which has problems such as not considering the multi-scale features of logging curves and insufficient accuracy, the YOLOv8x target detection algorithm in deep learning is utilized to detect the target strata, which has the ability to characterize the multi-scale features and can improve the efficiency and accuracy of the division. In order to better localize and identify targets, this paper proposes a new stratigraphic automatic division method, YOLOv8x-CAMDP, which introduces a CA (Coordinate Attention) mechanism module into the original YOLOv8x model to improve the model’s ability to identify stratigraphic interval boundaries. In addition, the CIOU loss function in the original YOLOv8x network model was replaced using the MDPIOU loss function to effectively improve the accuracy and efficiency of bounding box regression. Based on the logging data from the Xing 10 area pure oil zone, a thorough comparison of the YOLOv8x-CAMDP and YOLOv8x models’ training results is presented. The YOLOv8x-CAMDP model achieves a mean Average Precision (mAP) value of 98.7%, outperforming the YOLOv8x model by one percentage point. Moreover, the YOLOv8x-CAMDP model demonstrates greater precision in boundary division for each stratigraphic interval. The application of the YOLOv8x-CAMDP model to project implementation achieved significant results in stratigraphic division, reduced workload, and optimized manual division. These results not only confirm the practical value of the YOLOv8x-CAMDP model but also demonstrate the prospect and potential of its wide application.