Hamdullah Çuvalcı
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hamdullah Çuvalcı has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Onur Güler
Karadeniz Technical University
2 shared publications Aykut Çanakçi
Department of Metallurgical and Materials Engineering, Karadeniz Technical University, Trabzon, Turkey
1 shared publicationHasan Serdar Çelik
Karadeniz Technical University
1 shared publicationHüseyin İpek
Karadeniz Technical University
1 shared publicationKadir Erbay
Karadeniz Technical University
1 shared publicationMahir Gökdağ
Department of Civil Engineering, Ataturk University, Erzurum, Turkey
1 shared publication
Latest Publications
- Open Access
Particle-Level Engineering of Cu–Al–Ni Shape Memory Alloy Powders via Cryogenic Milling and Electroless Ni Coating
At particle-level engineering, this study mainly focused on the issues of microstructural heterogeneity and the high oxidation susceptibility of Cu-Al-Ni shape memory alloys (SMAs) suitable for high-temperature actuation. Initial powders of Cu (82–83 wt.%) and Al (14–15 wt.%) were first milled mechanically and the Cu-Al particles were modified using an electroless Nickel (Ni) coating process to achieve a controlled Ni enrichment of 4–5 wt.%. The SEM-EDS, XRD, and TGA findings reveal that the cryogenic milling effectively reforms dendritic Cu and spherical Al particles into a refined composite structure. This process resulted in particle size reduction from 40–70 µm to 5–20 µm, and apparent density values increased from 3.45 g·cm−3 to 4.10 g·cm−3. Microstructural investigations showed that the continuous Ni layer, without generating unwanted intermetallic phases, was obtained with the help of an electroless coating process. In addition, it was confirmed that the crystallite size decreased from 52.10 nm to 41.71 nm. Additionally, the oxidation of nickel-coated and cryogenically milled powders occurred at temperatures above 350 °C owing to the formation of a protective surface layer. In other words, these powders exhibited higher thermal stability. Consequently, this dual processing procedure represents a very useful method for changing particle shape and interfacial composition. These combined methods can help to create a powder structure with a composition optimum for the making of high-performance Cu-Al-Ni SMAs.
Open AccessParticle-Level Engineering of Cu–Al–Ni Shape Memory Alloy Powders via Cryogenic Milling and Electroless Ni Coating
At particle-level engineering, this study mainly focused on the issues of microstructural heterogeneity and the high oxidation susceptibility of Cu-Al-Ni shape memory alloys (SMAs) suitable for high-temperature actuation. Initial powders of Cu (82–83 wt.%) and Al (14–15 wt.%) were first milled mechanically and the Cu-Al particles were modified using an electroless Nickel (Ni) coating process to achieve a controlled Ni enrichment of 4–5 wt.%. The SEM-EDS, XRD, and TGA findings reveal that the cryogenic milling effectively reforms dendritic Cu and spherical Al particles into a refined composite structure. This process resulted in particle size reduction from 40–70 µm to 5–20 µm, and apparent density values increased from 3.45 g·cm−3 to 4.10 g·cm−3. Microstructural investigations showed that the continuous Ni layer, without generating unwanted intermetallic phases, was obtained with the help of an electroless coating process. In addition, it was confirmed that the crystallite size decreased from 52.10 nm to 41.71 nm. Additionally, the oxidation of nickel-coated and cryogenically milled powders occurred at temperatures above 350 °C owing to the formation of a protective surface layer. In other words, these powders exhibited higher thermal stability. Consequently, this dual processing procedure represents a very useful method for changing particle shape and interfacial composition. These combined methods can help to create a powder structure with a composition optimum for the making of high-performance Cu-Al-Ni SMAs.
- 19 February 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (23) , 23814-23826
Influence of Penetration Rate on Corrosion and Mechanical Characteristics of Welded Armor Steel
- 19 February 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (23) , 23814-23826
Influence of Penetration Rate on Corrosion and Mechanical Characteristics of Welded Armor Steel
- 12 July 2022
- Published by Springer Nature in Fibers and Polymers
- Vol. 23 (7) , 2017-2029
Novel Flame-retarded Novolac Matrix Hybrid Composites with Graphite Particles and Glass Fiber Reinforcement
- 12 July 2022
- Published by Springer Nature in Fibers and Polymers
- Vol. 23 (7) , 2017-2029
Novel Flame-retarded Novolac Matrix Hybrid Composites with Graphite Particles and Glass Fiber Reinforcement
- 3 May 2017
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 36 (7) , 899-907
Tribological behavior of ZA27/Al2O3/graphite hybrid nanocomposites
ZA27 alloy composites reinforced with alumina and graphite nanoparticles are a unique class of advanced engineered materials that have been developed to use in tribological applications. In this study, dry sliding wear behavior of ZA27 alloy matrix hybrid nanocomposites has been investigated. Mechanical alloying and hot pressing methods have been used for the fabrication of these composite materials. Sliding wear tests were conducted using a block-on-disc type sliding wear testing apparatus under unlubricated conditions. Scanning electron microscopy analyses have been carried out to examine the wear surfaces. The results showed that the increase of alumina nanoparticle content can positively influence improvement of the tribological behavior of the hybrid nanocomposites.
- 3 May 2017
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 36 (7) , 899-907
Tribological behavior of ZA27/Al2O3/graphite hybrid nanocomposites
ZA27 alloy composites reinforced with alumina and graphite nanoparticles are a unique class of advanced engineered materials that have been developed to use in tribological applications. In this study, dry sliding wear behavior of ZA27 alloy matrix hybrid nanocomposites has been investigated. Mechanical alloying and hot pressing methods have been used for the fabrication of these composite materials. Sliding wear tests were conducted using a block-on-disc type sliding wear testing apparatus under unlubricated conditions. Scanning electron microscopy analyses have been carried out to examine the wear surfaces. The results showed that the increase of alumina nanoparticle content can positively influence improvement of the tribological behavior of the hybrid nanocomposites.
- 8 November 2014
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 39 (12) , 9049-9056
Investigation of the Effect of Glass Fiber Content on the Mechanical Properties of Cast Polyamide
- 8 November 2014
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 39 (12) , 9049-9056
Investigation of the Effect of Glass Fiber Content on the Mechanical Properties of Cast Polyamide
- 24 February 2011
- Published by Springer Nature in Journal of Materials Science
- Vol. 46 (14) , 4850-4857
Investigation of the abrasive wear behaviour of ZA-27 alloy and CuSn10 bronze
- 24 February 2011
- Published by Springer Nature in Journal of Materials Science
- Vol. 46 (14) , 4850-4857
Investigation of the abrasive wear behaviour of ZA-27 alloy and CuSn10 bronze