Jean-Yves Jouvenel
Research Subjects
Jean-Yves Jouvenel has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Frédéric Bouchette
Université de Montpellier, CNRS, Place Eugène Bataillon, 34095 Montpellier, France
3 shared publications - Raphaël Certain
CEFREM, UMR CNRS 5110, Université de Perpignan Via-Domitia, 66100 Perpignan, France
3 shared publications - Samuel Meulé
Geosciences-M/GLADYS
3 shared publications - Garance Marlier
University of Montpellier, CNRS, Montpellier, France
2 shared publications - Garanc Marlier
Géosciences-Montpellier, University of Montpellier, CNRS, France
1 shared publication
Latest Publications
- Open Access
- 7 November 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (11) , 2004
Spectral Water Wave Dissipation by Biomimetic Soft Structure
Coastal protection solutions can be categorised as grey, hybrid or natural. Grey infrastructure includes artificial structures like dykes. Natural habitats like seagrasses are considered natural protection infrastructure. Hybrid solutions combine both natural and grey infrastructure. Evidence suggests that grey solutions can negatively impact the environment, while natural habitats prevent flooding without such adverse effects and provide many ecosystem services. New types of protective solutions, called biomimetic solutions, are inspired by natural habitats and reproduce their features using artificial materials. Few studies have been conducted on these new approaches. This study aims to quantify wave dissipation observed in situ above a biomimetic solution inspired by kelps, known for their wave-dampening properties. The solution was deployed in a full water column near Palavas-les-Flots in southern France. A one-month in situ experiment showed that the biomimetic solution dissipates around 10% of total wave energy on average, whatever the meteo-marine conditions. Wave energy dissipation is frequency-dependent: short waves are dissipated, while low-frequency energy increases. An anti-dissipative effect occurs for forcing conditions with frequencies close to the eigen mode linked to the biomimetic solution’s geometry, suggesting that resonance should be considered in designing future biomimetic protection solutions.
- 7 November 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (11) , 2004
Open AccessSpectral Water Wave Dissipation by Biomimetic Soft Structure
Coastal protection solutions can be categorised as grey, hybrid or natural. Grey infrastructure includes artificial structures like dykes. Natural habitats like seagrasses are considered natural protection infrastructure. Hybrid solutions combine both natural and grey infrastructure. Evidence suggests that grey solutions can negatively impact the environment, while natural habitats prevent flooding without such adverse effects and provide many ecosystem services. New types of protective solutions, called biomimetic solutions, are inspired by natural habitats and reproduce their features using artificial materials. Few studies have been conducted on these new approaches. This study aims to quantify wave dissipation observed in situ above a biomimetic solution inspired by kelps, known for their wave-dampening properties. The solution was deployed in a full water column near Palavas-les-Flots in southern France. A one-month in situ experiment showed that the biomimetic solution dissipates around 10% of total wave energy on average, whatever the meteo-marine conditions. Wave energy dissipation is frequency-dependent: short waves are dissipated, while low-frequency energy increases. An anti-dissipative effect occurs for forcing conditions with frequencies close to the eigen mode linked to the biomimetic solution’s geometry, suggesting that resonance should be considered in designing future biomimetic protection solutions.
- Open Access
- 18 October 2024
- Published by MDPI AG in Preprints.org
Spectral Water Wave Dissipation by Biomimetic Soft Structure
Coastal protection solutions can be categorized as grey, hybrid, or natural. Grey infrastructure includes artificial structures like dykes. Natural habitats like seagrasses are considered as natural protection infrastructure. Hybrid solutions combine both natural and grey infrastructure. Evidence suggest that grey solutions can negatively impact the environment, while natural habitats prevent flooding without such adverse effects and provide many ecosystem services. New types of protective solutions, called biomimetic solutions, are inspired by natural habitats and reproduce their features using artificial materials. Few studies have been conducted on these new approaches. This study aims to quantify wave dissipation observed in-situ above a biomimetic solution inspired by kelps, known for their wave dampening properties. The solution was deployed in full water column nearby Palavas-les-Flots in southern France. A one-month in-situ experimentation showed that the biomimetic solution dissipates around 10% of total wave energy on average, whatever the meteo-marine conditions. Wave energy dissipation is frequency dependent: short waves are dissipated, while low-frequency energy increased. An anti-dissipative effect occurs for forcing conditions with frequencies close to the eigen mode linked to the biomimetic solution's geometry, suggesting that resonance should be considered in designing future biomimetic protection solutions.
- 18 October 2024
- Published by MDPI AG in Preprints.org
Open AccessSpectral Water Wave Dissipation by Biomimetic Soft Structure
Coastal protection solutions can be categorized as grey, hybrid, or natural. Grey infrastructure includes artificial structures like dykes. Natural habitats like seagrasses are considered as natural protection infrastructure. Hybrid solutions combine both natural and grey infrastructure. Evidence suggest that grey solutions can negatively impact the environment, while natural habitats prevent flooding without such adverse effects and provide many ecosystem services. New types of protective solutions, called biomimetic solutions, are inspired by natural habitats and reproduce their features using artificial materials. Few studies have been conducted on these new approaches. This study aims to quantify wave dissipation observed in-situ above a biomimetic solution inspired by kelps, known for their wave dampening properties. The solution was deployed in full water column nearby Palavas-les-Flots in southern France. A one-month in-situ experimentation showed that the biomimetic solution dissipates around 10% of total wave energy on average, whatever the meteo-marine conditions. Wave energy dissipation is frequency dependent: short waves are dissipated, while low-frequency energy increased. An anti-dissipative effect occurs for forcing conditions with frequencies close to the eigen mode linked to the biomimetic solution's geometry, suggesting that resonance should be considered in designing future biomimetic protection solutions.
- Open Access
- 7 May 2024
- Published by TU Delft OPEN Publishing in CoastLab 2024: Physical Modelling in Coastal Engineering and Science
Determination Of Drag And Inertia Coefficients By An Analytical Model
Hard structures like dykes or groins have been recognized for their negative environmental impact and limited durability in the face of climate change (Sutton-Grier et al., 2015). The concept of Shore Soft Engineering (SSE) has allowed ecological considerations to be embedded in the design of coastal protection (Hartig et al., 2011). Among emerging defense structures, nature-based solutions are built with natural materials and rely on physical properties and mechanisms observed in nature. They aim to protect, manage and restore ecosystems while providing some benefit to the human-being and biodiversity (Cohen-Shacham et al., 2016); they offer an interesting alternative to hard structures. However, implementing these solutions in urbanized coastal areas where ecosystems are vulnerable can be challenging. Another alternative approach is using biomimetic solutions, which can provide the functions of natural systems like seagrass, dunes, or coral through robust human-made constructions. Natural habitats exist in a variety of more or less complex forms, ranging from rigid (mangroves, coral) to flexible (seagrass) (Mullarney and Henderson, 2018); and they drive changes in the current profile, in wave dissipation or in sediment motion. Understanding how to mimic these systems, in particular their internal geometry and hydrodynamic effects, is challenging. This complexity makes the development of biomimetic solutions difficult (Perricone et al., 2023). In this context, this study strictly focuses on wave dissipation by flexible systems. Wave dissipation by natural habitats has been extensively studied through laboratory experiments (Houser et al., 2015) and in-situ measurements (Bradley and Houser, 2009). The pioneer analytical model (Dalrymple et al., 1984) depicted aquatic vegetation as rigid cylinders; however, the rigidity assumption fails to capture the inherent flexibility of plants. Alternative strategies emerged to account for this flexibility, such as using an empirical drag coefficient (Mendez and Losada, 2004) or introducing an effective length, representing the length that a rigid cylinder would have to dissipate the same wave height as flexible cylinders (Luhar and Nepf, 2016). However, to define this effective length or an empirical drag coefficient, it is necessary to carry out in-situ measurements. Numerous analytical models based on force balance (Luhar and Nepf, 2016; Leclercq and de Langre, 2018) have been developed to represent the movement of flexible vegetation like seagrass. These models depict the flexible vegetation as a series of segmented rigid stems attached to each other and subjected to oscillating flows. Some models attempt to link stem motion with wave dissipation to integrate this coupling into numerical models (Yin et al., 2022). However, these models still require unknown quantities such as drag and inertial coefficients. The present study aims to develop an analytical model for determining drag and inertial coefficients based solely on the geometry, the structure flexibility and wave forcing. At last, the method could help better represent the dissipation into numerical simulations without the need for prior parametrization.
- 7 May 2024
- Published by TU Delft OPEN Publishing in CoastLab 2024: Physical Modelling in Coastal Engineering and Science
Open AccessDetermination Of Drag And Inertia Coefficients By An Analytical Model
Hard structures like dykes or groins have been recognized for their negative environmental impact and limited durability in the face of climate change (Sutton-Grier et al., 2015). The concept of Shore Soft Engineering (SSE) has allowed ecological considerations to be embedded in the design of coastal protection (Hartig et al., 2011). Among emerging defense structures, nature-based solutions are built with natural materials and rely on physical properties and mechanisms observed in nature. They aim to protect, manage and restore ecosystems while providing some benefit to the human-being and biodiversity (Cohen-Shacham et al., 2016); they offer an interesting alternative to hard structures. However, implementing these solutions in urbanized coastal areas where ecosystems are vulnerable can be challenging. Another alternative approach is using biomimetic solutions, which can provide the functions of natural systems like seagrass, dunes, or coral through robust human-made constructions. Natural habitats exist in a variety of more or less complex forms, ranging from rigid (mangroves, coral) to flexible (seagrass) (Mullarney and Henderson, 2018); and they drive changes in the current profile, in wave dissipation or in sediment motion. Understanding how to mimic these systems, in particular their internal geometry and hydrodynamic effects, is challenging. This complexity makes the development of biomimetic solutions difficult (Perricone et al., 2023). In this context, this study strictly focuses on wave dissipation by flexible systems. Wave dissipation by natural habitats has been extensively studied through laboratory experiments (Houser et al., 2015) and in-situ measurements (Bradley and Houser, 2009). The pioneer analytical model (Dalrymple et al., 1984) depicted aquatic vegetation as rigid cylinders; however, the rigidity assumption fails to capture the inherent flexibility of plants. Alternative strategies emerged to account for this flexibility, such as using an empirical drag coefficient (Mendez and Losada, 2004) or introducing an effective length, representing the length that a rigid cylinder would have to dissipate the same wave height as flexible cylinders (Luhar and Nepf, 2016). However, to define this effective length or an empirical drag coefficient, it is necessary to carry out in-situ measurements. Numerous analytical models based on force balance (Luhar and Nepf, 2016; Leclercq and de Langre, 2018) have been developed to represent the movement of flexible vegetation like seagrass. These models depict the flexible vegetation as a series of segmented rigid stems attached to each other and subjected to oscillating flows. Some models attempt to link stem motion with wave dissipation to integrate this coupling into numerical models (Yin et al., 2022). However, these models still require unknown quantities such as drag and inertial coefficients. The present study aims to develop an analytical model for determining drag and inertial coefficients based solely on the geometry, the structure flexibility and wave forcing. At last, the method could help better represent the dissipation into numerical simulations without the need for prior parametrization.