Ming Zhong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ming Zhong has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
Patrick Yin Chiang
State Key Laboratory of Integrated Chips and Systems, Fudan University, Shanghai, China
5 shared publicationsYuan Li
Design Department, PhotonIC Technologies Inc., Shanghai, China
5 shared publicationsMinhao Li
State Key Laboratory of Integrated Chips and Systems, Fudan University, Shanghai, China
3 shared publicationsPisen Zhou
Design Department, PhotonIC Technologies Inc., Shanghai, China
3 shared publications- Wei Chen
Fudan University
3 shared publications Ying Wu
Design Department, PhotonIC Technologies Inc., Shanghai, China
3 shared publications
Latest Publications
- 29 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 8, 197-200
A 4×56 -Gbaud PAM-4 Linear and Low-Noise TIA for Linear-Drive Pluggable Optics
This letter presents a 4 × 56-Gbaud linear transimpedance amplifier (TIA) with low noise and high linearity, designed for linear-drive pluggable optics (LPO) and implemented in 0.13-μ m SiGe-BiCMOS technology (fT/fMAX = 260/350 GHz). The TIA features an inductive shunt-feedback (ISFB) transimpedance stage (TIS) with a π-topology L-C network as the input stage, achieving wide bandwidth (BW) and low noise despite large photodiode (PD) and packaging parasitic capacitances. Two current-splitting variable gain amplifiers (VGAs) with continuous-time linear equalizer (CTLE) functionality are cascaded after the TIS, providing a gain control range of -12 dB to +18 dB and accommodating input currents up to 2mApp. A 50-ohm output buffer with T-coil further extends the BW. Measurement results demonstrate a maximum opticalto-electrical transimpedance gain (O/E.ZT) of 73.8 dBΩ, an O/E O/E.BW exceeding 40 GHz, an input-referred noise (IRN) current of 1.9 μArms, and total harmonic distortion (THD) < 4.5% for a 700-mVpp output swing. The TIA supports 56-Gbaud PAM-4 eye diagrams with PRBS31Q and achieves 9.7-dBm optical modulation amplitude (OMA) sensitivity at the pre-FEC BER limit of 2.4 × 10-4 for 56-Gbaud PAM-4 SSPRQ. The design achieves a power efficiency of 1.67 pJ/bit and occupies an area of 3.14 × 1.04 mm2.
- 29 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Solid-State Circuits Letters
- Vol. 8, 197-200
A 4×56 -Gbaud PAM-4 Linear and Low-Noise TIA for Linear-Drive Pluggable Optics
This letter presents a 4 × 56-Gbaud linear transimpedance amplifier (TIA) with low noise and high linearity, designed for linear-drive pluggable optics (LPO) and implemented in 0.13-μ m SiGe-BiCMOS technology (fT/fMAX = 260/350 GHz). The TIA features an inductive shunt-feedback (ISFB) transimpedance stage (TIS) with a π-topology L-C network as the input stage, achieving wide bandwidth (BW) and low noise despite large photodiode (PD) and packaging parasitic capacitances. Two current-splitting variable gain amplifiers (VGAs) with continuous-time linear equalizer (CTLE) functionality are cascaded after the TIS, providing a gain control range of -12 dB to +18 dB and accommodating input currents up to 2mApp. A 50-ohm output buffer with T-coil further extends the BW. Measurement results demonstrate a maximum opticalto-electrical transimpedance gain (O/E.ZT) of 73.8 dBΩ, an O/E O/E.BW exceeding 40 GHz, an input-referred noise (IRN) current of 1.9 μArms, and total harmonic distortion (THD) < 4.5% for a 700-mVpp output swing. The TIA supports 56-Gbaud PAM-4 eye diagrams with PRBS31Q and achieves 9.7-dBm optical modulation amplitude (OMA) sensitivity at the pre-FEC BER limit of 2.4 × 10-4 for 56-Gbaud PAM-4 SSPRQ. The design achieves a power efficiency of 1.67 pJ/bit and occupies an area of 3.14 × 1.04 mm2.
- 14 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (7) , 1089-1092
A 112-Gb/s PAM-4 Optical Receiver With Sub-1.9- μA rms Noise and <4% THD for Linear-Drive Pluggable Optics
This letter presents a 4 × 112 Gb/s optical receiver with low noise and high output swing for linear-drive pluggable optics (LPOs). The receiver is implemented in 0.13-μm SiGe-BiCMOS technology with fT/fMAX = 260/350 GHz. An inductive shunt-feedback (ISFB) transimpedance stage (TIS) employing π-topology LC network is positioned as an input stage of optical receiver. This design achieves a wide bandwidth (BW) and low noise simultaneously, despite large photograph diode (PD) and packaging parasitic capacitance. Two current-splitting variable gain amplifiers (VGAs) with continuous-time linear equalizer (CTLE) function cascaded after TIS. These VGAs feature high reliability, compensate for BW loss, and provide a gain control range of -12 dB~+18 dB, accommodating input current up to 2 mApp. The measurement results show that optical receiver provides a maximum O/E transimpedance gain (O/E.ZT) of 73.8 dBΩ with O/E.BW beyond 35 GHz, an input-referred noise (IRN) current of 1.9 μArms, and the total harmonic distortion (THD) < 4% for 600-mVpp output swing. The proposed optical receiver operates PAM-4 eye diagrams up to 56-Gbaud using PRBS31Q and exhibits an optical modulation amplitude (OMA) sensitivity of -9 dBm at pre-FEC bit error rate (BER) limit of 2 × 10-4 with 56-Gbaud PAM-4 SSPRQ. The optical receiver achieves a power efficiency of 1.65-pJ/bit and occupies an area of 3.14 × 1.04 mm2.
- 14 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Technology Letters
- Vol. 35 (7) , 1089-1092
A 112-Gb/s PAM-4 Optical Receiver With Sub-1.9- μA rms Noise and <4% THD for Linear-Drive Pluggable Optics
This letter presents a 4 × 112 Gb/s optical receiver with low noise and high output swing for linear-drive pluggable optics (LPOs). The receiver is implemented in 0.13-μm SiGe-BiCMOS technology with fT/fMAX = 260/350 GHz. An inductive shunt-feedback (ISFB) transimpedance stage (TIS) employing π-topology LC network is positioned as an input stage of optical receiver. This design achieves a wide bandwidth (BW) and low noise simultaneously, despite large photograph diode (PD) and packaging parasitic capacitance. Two current-splitting variable gain amplifiers (VGAs) with continuous-time linear equalizer (CTLE) function cascaded after TIS. These VGAs feature high reliability, compensate for BW loss, and provide a gain control range of -12 dB~+18 dB, accommodating input current up to 2 mApp. The measurement results show that optical receiver provides a maximum O/E transimpedance gain (O/E.ZT) of 73.8 dBΩ with O/E.BW beyond 35 GHz, an input-referred noise (IRN) current of 1.9 μArms, and the total harmonic distortion (THD) < 4% for 600-mVpp output swing. The proposed optical receiver operates PAM-4 eye diagrams up to 56-Gbaud using PRBS31Q and exhibits an optical modulation amplitude (OMA) sensitivity of -9 dBm at pre-FEC bit error rate (BER) limit of 2 × 10-4 with 56-Gbaud PAM-4 SSPRQ. The optical receiver achieves a power efficiency of 1.65-pJ/bit and occupies an area of 3.14 × 1.04 mm2.
- 4 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (5) , 2089-2102
An Adaptive Beam-Steering dToF LiDAR System Using Addressable Multi-Channel VCSEL Transmitter, 128 × 80 SPAD Sensor, and ML-Based Edge-Computing Object Detection
In this work, a solid-state direct time-of-flight (dToF) and adaptive beam-steering Light Detection and Ranging (LiDAR) system is proposed for machine learning (ML) based object detection. To leverage the capabilities of software and hardware, a co-optimization design from a neural network based algorithm to the architecture of transmitter, receiver and optical components is realized. Firstly, an object detection neural network is proposed for the depth-only input algorithm, which indicates the Region of Interest (ROI) in the illuminating field and gives hints of opened scan channels in the next two frames to decrease the total cost of the laser driver and sensor array. Next, the proposed network utilizes the Cross-Stage-Patrial (CSP) block to replace the residual structure in the backbone to achieve a lightweight performance and is implemented on the NVIDIA-Jetson to verify the system-level adaptive beam steering feature. To realize the smart working mode, a customized multi-channel and addressable TX is designed for adaptive and optical control to save power consumption and extend the ranging distance. At the same time, a $128\times 80$ resolution RX which consists of Single-Photon Avalanche Diodes (SPADs) and column-wise Time-to-Digital Converter (TDC) is incorporated to capture the returned photons for combining sub-regions into an entire depth map. Next, to customize the specific scanning mechanism, for the optical setup, a cylindrical lens array is designed to reshape the laser beam, which matches the pattern of the transmitter to illuminate different targeted objects. Both the laser driver chip and the sensor chip with a $128\times 80$ SPAD array are fabricated in the 180-nm Bipolar-CMOS-DMOS (BCD) process. Finally, the laser driver chip realizes the power of 5 W with an adjustable pulse width of 1.5 ns and the SPAD array integrates the depth accuracy of 5 cm at 15 m. Due to that the neural network realizes an accuracy up to 0.8, a low-power solid-state LiDAR prototype with adaptive beam steering is demonstrated.
- 4 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 72 (5) , 2089-2102
An Adaptive Beam-Steering dToF LiDAR System Using Addressable Multi-Channel VCSEL Transmitter, 128 × 80 SPAD Sensor, and ML-Based Edge-Computing Object Detection
In this work, a solid-state direct time-of-flight (dToF) and adaptive beam-steering Light Detection and Ranging (LiDAR) system is proposed for machine learning (ML) based object detection. To leverage the capabilities of software and hardware, a co-optimization design from a neural network based algorithm to the architecture of transmitter, receiver and optical components is realized. Firstly, an object detection neural network is proposed for the depth-only input algorithm, which indicates the Region of Interest (ROI) in the illuminating field and gives hints of opened scan channels in the next two frames to decrease the total cost of the laser driver and sensor array. Next, the proposed network utilizes the Cross-Stage-Patrial (CSP) block to replace the residual structure in the backbone to achieve a lightweight performance and is implemented on the NVIDIA-Jetson to verify the system-level adaptive beam steering feature. To realize the smart working mode, a customized multi-channel and addressable TX is designed for adaptive and optical control to save power consumption and extend the ranging distance. At the same time, a $128\times 80$ resolution RX which consists of Single-Photon Avalanche Diodes (SPADs) and column-wise Time-to-Digital Converter (TDC) is incorporated to capture the returned photons for combining sub-regions into an entire depth map. Next, to customize the specific scanning mechanism, for the optical setup, a cylindrical lens array is designed to reshape the laser beam, which matches the pattern of the transmitter to illuminate different targeted objects. Both the laser driver chip and the sensor chip with a $128\times 80$ SPAD array are fabricated in the 180-nm Bipolar-CMOS-DMOS (BCD) process. Finally, the laser driver chip realizes the power of 5 W with an adjustable pulse width of 1.5 ns and the SPAD array integrates the depth accuracy of 5 cm at 15 m. Due to that the neural network realizes an accuracy up to 0.8, a low-power solid-state LiDAR prototype with adaptive beam steering is demonstrated.
- 4 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (9) , 3379-3389
A Sub-Nanosecond Pulsed VCSEL Driver With PVT-Compensated Constant Current, Integrated Boost Switching Regulator and Class-1 Laser Eye Safety
This article presents a sub-nanoseconds pulsed laser diode (LD) driver IC for multi-junction (MJ-) vertical-cavity surface-emitting laser (VCSEL) arrays. An embedded real-time current control loop keeps the error of laser current amplitude within ±3% for 900 ps~32 ns pulses, even with process, voltage and temperature (PVT) variations of the VCSEL and the driver. With real-time PVT-compensation techniques, the variation of pulsewidth and propagation delay is below 140 ps for different chips under varying supply. A boost switching regulator is integrated into the IC to convert a low supply voltage into the $5\sim 8.5$ -V laser anode supply. A complete set of laser safety check blocks is integrated to guarantee class-1 eye safety, as the driver IC can stop emitting and cutoff the laser supply when a laser safety hazard is detected.
- 4 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (9) , 3379-3389
A Sub-Nanosecond Pulsed VCSEL Driver With PVT-Compensated Constant Current, Integrated Boost Switching Regulator and Class-1 Laser Eye Safety
This article presents a sub-nanoseconds pulsed laser diode (LD) driver IC for multi-junction (MJ-) vertical-cavity surface-emitting laser (VCSEL) arrays. An embedded real-time current control loop keeps the error of laser current amplitude within ±3% for 900 ps~32 ns pulses, even with process, voltage and temperature (PVT) variations of the VCSEL and the driver. With real-time PVT-compensation techniques, the variation of pulsewidth and propagation delay is below 140 ps for different chips under varying supply. A boost switching regulator is integrated into the IC to convert a low supply voltage into the $5\sim 8.5$ -V laser anode supply. A complete set of laser safety check blocks is integrated to guarantee class-1 eye safety, as the driver IC can stop emitting and cutoff the laser supply when a laser safety hazard is detected.
- 17 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 36 (24) , 1481-1484
A 4 × 56-Gbaud PAM-4 Optical Receiver Integrated With SiGe-BiCMOS TIA
A chip-on-board (COB) packaged four-channel optical receiver integrated with a transimpedance amplifier (TIA) in 0.13-μm SiGe-BiCMOS technology with f T /f MAX =260/350 GHz demonstrating 56-Gbaud four-level pulse-amplitude modulation (PAM-4) with low noise and high linearity is presented in support of optical receivers required in linear-drive pluggable optics (LPO) and beyond-400G optical links. The proposed four-stage optical receiver comprises an inductive shunt-feedback TIA followed by two variable gain amplifiers (VGAs) with a continuous-time linear equalizer (CTLE) function and a 50-ohm output buffer. The π-topology L-C network and inductive shunt feedback techniques are used in TIA to meet the specifications of wide bandwidth (BW) and low noise. Two current-splitting VGA stages with CTLE function cascaded after TIA featuring high reliability can compensate for the loss of BW which caused by photo diode (PD) parasitic capacitance and provide a gain control range of -12dB ~ +18dB that accommodates input current up to 2mApp with low group delay variation. The 50-ohm output buffer with a T-coil and degeneration resistor achieves better output matching and high linearity. Measurement results show that TIA provides a maximum DC transimpedance gain (ZT) of 74 dBΩ while O/E.BW is beyond 40 GHz, the 50-ohm output buffer offers 580-mV output swing and PAM-4 electrical eye diagrams up to 56-Gbaud of optical receiver with PRBS31Q. The optical receiver achieves a sensitivity of − 9.7-dBm optical modulation amplitude (OMA) at pre-FEC BER limit of 2.4 × 10 -4 operating 56-Gbaud PAM-4 SSPRQ and consumes 720mW with a power supply of 3.3 V.
- 17 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 36 (24) , 1481-1484
A 4 × 56-Gbaud PAM-4 Optical Receiver Integrated With SiGe-BiCMOS TIA
A chip-on-board (COB) packaged four-channel optical receiver integrated with a transimpedance amplifier (TIA) in 0.13-μm SiGe-BiCMOS technology with f T /f MAX =260/350 GHz demonstrating 56-Gbaud four-level pulse-amplitude modulation (PAM-4) with low noise and high linearity is presented in support of optical receivers required in linear-drive pluggable optics (LPO) and beyond-400G optical links. The proposed four-stage optical receiver comprises an inductive shunt-feedback TIA followed by two variable gain amplifiers (VGAs) with a continuous-time linear equalizer (CTLE) function and a 50-ohm output buffer. The π-topology L-C network and inductive shunt feedback techniques are used in TIA to meet the specifications of wide bandwidth (BW) and low noise. Two current-splitting VGA stages with CTLE function cascaded after TIA featuring high reliability can compensate for the loss of BW which caused by photo diode (PD) parasitic capacitance and provide a gain control range of -12dB ~ +18dB that accommodates input current up to 2mApp with low group delay variation. The 50-ohm output buffer with a T-coil and degeneration resistor achieves better output matching and high linearity. Measurement results show that TIA provides a maximum DC transimpedance gain (ZT) of 74 dBΩ while O/E.BW is beyond 40 GHz, the 50-ohm output buffer offers 580-mV output swing and PAM-4 electrical eye diagrams up to 56-Gbaud of optical receiver with PRBS31Q. The optical receiver achieves a sensitivity of − 9.7-dBm optical modulation amplitude (OMA) at pre-FEC BER limit of 2.4 × 10 -4 operating 56-Gbaud PAM-4 SSPRQ and consumes 720mW with a power supply of 3.3 V.