Zihan Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zihan Sun has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
Haotian Zheng
School of Electrical Engineering, Xi’an Jiaotong University, Xi’an 710049, People’s Republic of China
5 shared publications- Xinlei Zheng
School of Electrical Engineering, Xi’an Jiaotong University, Xi’an 710049, People’s Republic of China
5 shared publications - Zheng Zhao
School of Electrical Engineering, Xi’an Jiaotong University, Xi’an 710049, People’s Republic of China
5 shared publications Jiabao Tang
School of Electrical Engineering, Xi’an Jiaotong University, Xi’an 710049, People’s Republic of China
3 shared publicationsJiangtao Li
School of Electrical Engineering
3 shared publications- Jiangtao Li
School of Electrical Engineering, Xi’an Jiaotong University, Xi’an 710049, People’s Republic of China
3 shared publications
Latest Publications
- 13 November 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (46) , 465202
Improvement on the energy efficiency of plasma-based NO x synthesis by pulsed and DC hybrid discharge
Plasma-based NO x synthesis has attracted widely attention for sustainable nitrogen fixation and ammonia production, due to its distinct advantages in terms of clean and on-site production. However, the synthesis of NO x in plasma is accompanied by the generation of unfavorable reactive species and the occurrence of irrelevant reactions, resulting in the high energy cost of plasma-based NO x synthesis. In the present work, the selective excitation of vibrational excited species in pulsed and DC hybrid discharge was taken into account, with the chemical kinetic mechanisms of hybrid discharge and the modulation of DC voltage amplitude on the energy efficiency of NO x synthesis being the focal point. Concentrations of NO x were measured as a function of DC voltage amplitude, and it was found that there was an optimal DC voltage amplitude existing for the lowest energy consumption (EC) of NO x synthesis. A 0D model was constructed to reveal the potential reaction mechanisms. As the DC voltage increased, the E/N was reduced during the pulse and the selectivity of vibrational excitation was promoted, which were conductive to the NO x synthesis with high energy efficiency. But due to the less number density of O atoms in hybrid discharge, the oxidation process of NO to NO 2 was weakened and the quenching of NO was enhanced. Therefore, there was a competition between the reaction pathways that were dominated by the conversion of N 2 ( v ) and the quenching of NO in hybrid discharge plasma. An optimal DC voltage exists which enables the most efficient EC for hybrid discharge.
- 13 November 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (46) , 465202
Improvement on the energy efficiency of plasma-based NO x synthesis by pulsed and DC hybrid discharge
Plasma-based NO x synthesis has attracted widely attention for sustainable nitrogen fixation and ammonia production, due to its distinct advantages in terms of clean and on-site production. However, the synthesis of NO x in plasma is accompanied by the generation of unfavorable reactive species and the occurrence of irrelevant reactions, resulting in the high energy cost of plasma-based NO x synthesis. In the present work, the selective excitation of vibrational excited species in pulsed and DC hybrid discharge was taken into account, with the chemical kinetic mechanisms of hybrid discharge and the modulation of DC voltage amplitude on the energy efficiency of NO x synthesis being the focal point. Concentrations of NO x were measured as a function of DC voltage amplitude, and it was found that there was an optimal DC voltage amplitude existing for the lowest energy consumption (EC) of NO x synthesis. A 0D model was constructed to reveal the potential reaction mechanisms. As the DC voltage increased, the E/N was reduced during the pulse and the selectivity of vibrational excitation was promoted, which were conductive to the NO x synthesis with high energy efficiency. But due to the less number density of O atoms in hybrid discharge, the oxidation process of NO to NO 2 was weakened and the quenching of NO was enhanced. Therefore, there was a competition between the reaction pathways that were dominated by the conversion of N 2 ( v ) and the quenching of NO in hybrid discharge plasma. An optimal DC voltage exists which enables the most efficient EC for hybrid discharge.
- 16 October 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (42) , 425204
Enhancement of NOx production energy efficiency via reaction kinetics optimization utilizing hybrid pulse/RF plasma
Discharge plasma, grounded in non-equilibrium reaction pathways, offers the theoretical potential for fast and efficient chemical synthesis, particularly in nitrogen fixation via air plasma. However, the efficient generation of target products remains a central challenge in practical applications, due to the presence of numerous complex and unavoidable parasitic reactions within the plasma. In this study, a novel three-electrode structure was employed to control NO x production through hybrid pulse/radio frequency (RF) plasma. Through plasma emission images, it was observed that an RF electric field exceeding 500 V altered the discharge region of the pulsed discharge. The optical emission spectroscopy (OES) results indicated that an RF electric field can effectively increase the N2 vibrational temperature. Simulation and experimental results shown that the energy efficiency of NO x production first increases and then decreases with increasing RF voltage. On one hand, a suitable RF electric field can sustain the electrons generated by pulsed discharge and provide an appropriate E/N ratio conducive to efficient NO production. On the other hand, an excessively high RF electric field may induce non-self-sustained weak ionization, leading to a loss of control over the optimized reaction pathways. This study proposes a strategy to enhance energy efficiency in plasma chemistry by selectively promoting low-threshold electron-driven reactions over ionization-dominated pathways.
- 16 October 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (42) , 425204
Enhancement of NOx production energy efficiency via reaction kinetics optimization utilizing hybrid pulse/RF plasma
Discharge plasma, grounded in non-equilibrium reaction pathways, offers the theoretical potential for fast and efficient chemical synthesis, particularly in nitrogen fixation via air plasma. However, the efficient generation of target products remains a central challenge in practical applications, due to the presence of numerous complex and unavoidable parasitic reactions within the plasma. In this study, a novel three-electrode structure was employed to control NO x production through hybrid pulse/radio frequency (RF) plasma. Through plasma emission images, it was observed that an RF electric field exceeding 500 V altered the discharge region of the pulsed discharge. The optical emission spectroscopy (OES) results indicated that an RF electric field can effectively increase the N2 vibrational temperature. Simulation and experimental results shown that the energy efficiency of NO x production first increases and then decreases with increasing RF voltage. On one hand, a suitable RF electric field can sustain the electrons generated by pulsed discharge and provide an appropriate E/N ratio conducive to efficient NO production. On the other hand, an excessively high RF electric field may induce non-self-sustained weak ionization, leading to a loss of control over the optimized reaction pathways. This study proposes a strategy to enhance energy efficiency in plasma chemistry by selectively promoting low-threshold electron-driven reactions over ionization-dominated pathways.
- 1 October 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (10) , 105015
Repetitively nanosecond pulsed discharge along dielectric surfaces: discharge and surface charge dynamics and local streamer-to-filament transition
The discharge and surface charge dynamics, as well as the local streamer-to-filament transition of a three-electrode surface discharge under repetitive nanosecond pulses with a frequency of 1 kHz at atmospheric pressure, are studied through experiments and simulations. Evolutions of plasma morphology and electric field vector, as obtained by an intensified charge-coupled device camera and an improved electric field induced second harmonic method, respectively, are utilized to analyze discharge dynamics. A 2D fluid model combined with a 0D kinetic model is established to study the accumulation behavior of surface charge and mechanism of the local streamer-to-filament transition. The simulation results demonstrate a qualitative agreement with the experimental measurements on the discharge evolution, waveforms of discharge current and key features of the electric field. The results show that a three-electrode surface discharge includes three discharge phases: the primary streamer, local enhanced discharge and reverse breakdown. The local enhanced discharge occurs near the high-voltage (HV) electrode, characterized by a local streamer-to-filament transition and subsequent emission belt parallel to the edge of HV electrode, after the primary streamer bridges the two electrodes. The local streamer-to-filament transition is attributed to the local accumulation of active species with a lower threshold energy in the high field region (∼25 kV cm−1) similar to that of the secondary streamer in pin-plane discharges. The emission belt is formed by the high-density charge spot at the filament head, a phenomenon attributable to charge migration under the influence of an applied electric field. The spatial non-uniformity of plasma channel is a general feature in non-uniform field discharges and is a key process that induces the discharge mode transition.
- 1 October 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (10) , 105015
Repetitively nanosecond pulsed discharge along dielectric surfaces: discharge and surface charge dynamics and local streamer-to-filament transition
The discharge and surface charge dynamics, as well as the local streamer-to-filament transition of a three-electrode surface discharge under repetitive nanosecond pulses with a frequency of 1 kHz at atmospheric pressure, are studied through experiments and simulations. Evolutions of plasma morphology and electric field vector, as obtained by an intensified charge-coupled device camera and an improved electric field induced second harmonic method, respectively, are utilized to analyze discharge dynamics. A 2D fluid model combined with a 0D kinetic model is established to study the accumulation behavior of surface charge and mechanism of the local streamer-to-filament transition. The simulation results demonstrate a qualitative agreement with the experimental measurements on the discharge evolution, waveforms of discharge current and key features of the electric field. The results show that a three-electrode surface discharge includes three discharge phases: the primary streamer, local enhanced discharge and reverse breakdown. The local enhanced discharge occurs near the high-voltage (HV) electrode, characterized by a local streamer-to-filament transition and subsequent emission belt parallel to the edge of HV electrode, after the primary streamer bridges the two electrodes. The local streamer-to-filament transition is attributed to the local accumulation of active species with a lower threshold energy in the high field region (∼25 kV cm−1) similar to that of the secondary streamer in pin-plane discharges. The emission belt is formed by the high-density charge spot at the filament head, a phenomenon attributable to charge migration under the influence of an applied electric field. The spatial non-uniformity of plasma channel is a general feature in non-uniform field discharges and is a key process that induces the discharge mode transition.
- 17 January 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (11) , 115205
Effects of pulse rise rate and pulse width on the dynamics of secondary streamers and radical production in atmospheric-pressure air
The role of the secondary streamer in radical production has been extensively studied, while most of studies analyzed the secondary streamer by assuming a constant electric field in the secondary streamer, thereby ignoring the dynamic nature of the secondary streamer. In this study, the dynamics of the secondary streamer and the effects of pulse rise rate and pulse width are investigated using simulations. The temporal evolution of the secondary streamer under pulsed voltage is analyzed using a novel model. The results shows that the electric field in the secondary streamer first decreases linearly with the length of the secondary streamer, and then changes with the pulsed voltage after the cessation of the secondary streamer. The decrease of the electric field in the secondary streamer is the dominant factor responsible for the cessation of the secondary streamer. As a result, radicals are predominantly produced prior to the cessation of the secondary streamer. By understanding the dynamics of the secondary streamer, it becomes possible to control the electric field and length of the secondary streamer by adjusting the pulse rise rate and pulse width, respectively, to enhance the energy efficiency of radical production. The increase in the length of the secondary streamer is always advantageous for improving energy efficiency, as it leads to greater energy deposition within the secondary streamer. For N(4S), the optimal electric field is approximately 600 Td, which cannot be achieved in the secondary streamer. In contrast, for O(3P), the optimal electric field is around 180 Td, which can be attained by regulating the voltage waveform.
- 17 January 2025
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (11) , 115205
Effects of pulse rise rate and pulse width on the dynamics of secondary streamers and radical production in atmospheric-pressure air
The role of the secondary streamer in radical production has been extensively studied, while most of studies analyzed the secondary streamer by assuming a constant electric field in the secondary streamer, thereby ignoring the dynamic nature of the secondary streamer. In this study, the dynamics of the secondary streamer and the effects of pulse rise rate and pulse width are investigated using simulations. The temporal evolution of the secondary streamer under pulsed voltage is analyzed using a novel model. The results shows that the electric field in the secondary streamer first decreases linearly with the length of the secondary streamer, and then changes with the pulsed voltage after the cessation of the secondary streamer. The decrease of the electric field in the secondary streamer is the dominant factor responsible for the cessation of the secondary streamer. As a result, radicals are predominantly produced prior to the cessation of the secondary streamer. By understanding the dynamics of the secondary streamer, it becomes possible to control the electric field and length of the secondary streamer by adjusting the pulse rise rate and pulse width, respectively, to enhance the energy efficiency of radical production. The increase in the length of the secondary streamer is always advantageous for improving energy efficiency, as it leads to greater energy deposition within the secondary streamer. For N(4S), the optimal electric field is approximately 600 Td, which cannot be achieved in the secondary streamer. In contrast, for O(3P), the optimal electric field is around 180 Td, which can be attained by regulating the voltage waveform.
- 4 November 2024
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (4) , 045202
Effects of pulse rise time and pulse width on discharge mode transition of SDBD plasma under repetitive pulses
Affected by environmental states and power supply parameters, the discharge mode of surface dielectric barrier discharge (SDBD) plasma may gradually transfer from O3 mode to NO x mode, resulting in various gas-phase species for different applications. Despite the intensive study of attempts to control this discharge mode transition by changing discharge conditions and power excitations in recent years, the effects of the pulse rise time and the pulse width on the discharge mode transition have not been discussed. In the present study, a SDBD was excited by repetitive pulses with different pulse rise times or pulse widths, and the time-varying concentrations of key long-lived species (O3 and NO2) were quantified. The results demonstrated that it was possible to modulate the discharge mode by adjusting pulse rise time/pulse width. The quenching of O3 was observed to occur at a faster rate and the mode transition was noted to occur at an earlier point in time as the pulse rise time decreased from 225 ns to 125 ns and the pulse width increased from 0.5 μs to 4 μs. The employment of a zero-dimensional model for the analysis of plasma chemical kinetics revealed that the reduction in pulse rise time and the prolongation of pulse width resulted in an increase in the mean vibrational energy of N2(v) and a more rapid electrode temperature rise caused by plasma heating. The former enhanced the generation of NO, while the latter accelerated the thermal decomposition of O3, thereby promoting the speed of mode transition.
- 4 November 2024
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 58 (4) , 045202
Effects of pulse rise time and pulse width on discharge mode transition of SDBD plasma under repetitive pulses
Affected by environmental states and power supply parameters, the discharge mode of surface dielectric barrier discharge (SDBD) plasma may gradually transfer from O3 mode to NO x mode, resulting in various gas-phase species for different applications. Despite the intensive study of attempts to control this discharge mode transition by changing discharge conditions and power excitations in recent years, the effects of the pulse rise time and the pulse width on the discharge mode transition have not been discussed. In the present study, a SDBD was excited by repetitive pulses with different pulse rise times or pulse widths, and the time-varying concentrations of key long-lived species (O3 and NO2) were quantified. The results demonstrated that it was possible to modulate the discharge mode by adjusting pulse rise time/pulse width. The quenching of O3 was observed to occur at a faster rate and the mode transition was noted to occur at an earlier point in time as the pulse rise time decreased from 225 ns to 125 ns and the pulse width increased from 0.5 μs to 4 μs. The employment of a zero-dimensional model for the analysis of plasma chemical kinetics revealed that the reduction in pulse rise time and the prolongation of pulse width resulted in an increase in the mean vibrational energy of N2(v) and a more rapid electrode temperature rise caused by plasma heating. The former enhanced the generation of NO, while the latter accelerated the thermal decomposition of O3, thereby promoting the speed of mode transition.