Hongpeng Gao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hongpeng Gao has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Zheng Chen
University of California, San Diego
6 shared publications Weikang Li
Aiiso Yufeng Li Family Department of Chemical and Nano Engineering
4 shared publications- Varun Gupta
Program of Materials Science and Engineering
3 shared publications Xiaolu Yu
Aiiso Yufeng Li Family Department of Chemical and Nano Engineering
3 shared publications- Ying Shirley Meng
University of Chicago
3 shared publications - Alex Liu
Aiiso Yufeng Li Family Department of Chemical and Nano Engineering University of California San Diego, La Jolla CA 92093 USA
2 shared publications
Latest Publications
- Open Access
- 22 September 2026
- Published by Wiley in Advanced Materials
- p. e75071
Direct Recycling of Lithium‐Ion Batteries With Aqueous Relithiation: Mechanistic Insights and Recent Advances
This review explores the advances and challenges in direct recycling of lithium‐ion battery (LiB) cathode materials via aqueous relithiation (AR), with emphasis on the thermodynamic and kinetic factors governing lithium migration and reintegration into degraded active materials across ternary layered oxides, olivine, and spinel crystal structures. While aqueous treatments, mainly hydrothermal relithiation (HR), demonstrate strong potential for restoring electrochemical performance, scalability remains a critical barrier. The advantages and limitations of batch studies in defining thermodynamic boundaries are evaluated, and pathways toward continuous processing, compositional upcycling to emerging chemistries, and standardized impurity reporting are proposed. The success of this method further relies on effective cathode sorting, advanced data‐driven process controls, and the establishment of unified benchmarks to enable fair comparison across studies. Ultimately, aqueous relithiation lies at the intersection of scientific discovery and industrial application, where operational boundaries, logistical frameworks, and regulatory alignment will shape its transition into industry.
- 22 September 2026
- Published by Wiley in Advanced Materials
- p. e75071
Open AccessDirect Recycling of Lithium‐Ion Batteries With Aqueous Relithiation: Mechanistic Insights and Recent Advances
This review explores the advances and challenges in direct recycling of lithium‐ion battery (LiB) cathode materials via aqueous relithiation (AR), with emphasis on the thermodynamic and kinetic factors governing lithium migration and reintegration into degraded active materials across ternary layered oxides, olivine, and spinel crystal structures. While aqueous treatments, mainly hydrothermal relithiation (HR), demonstrate strong potential for restoring electrochemical performance, scalability remains a critical barrier. The advantages and limitations of batch studies in defining thermodynamic boundaries are evaluated, and pathways toward continuous processing, compositional upcycling to emerging chemistries, and standardized impurity reporting are proposed. The success of this method further relies on effective cathode sorting, advanced data‐driven process controls, and the establishment of unified benchmarks to enable fair comparison across studies. Ultimately, aqueous relithiation lies at the intersection of scientific discovery and industrial application, where operational boundaries, logistical frameworks, and regulatory alignment will shape its transition into industry.
- 25 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (9) , 13750-13764
Maximizing Lithium Recovery in Direct Recycling: Relithiation of Layered Oxide Cathodes Using Residual Lithium
Self-saturating direct recycling techniques, such as hydrothermal relithiation, offer promising pathways for scalable lithium-ion battery recycling due to their lower resource demands and reduced environmental impact compared with conventional recycling methods. However, they often require excess lithium salt additives to drive relithiation. In this study, we present a hydrothermal relithiation strategy driven by residual lithium compounds retained in the cathode black mass after cell disassembly, eliminating the need for external lithium salts during the hydrothermal step. Using spent LiNi0.33Co0.33Mn0.33O2 (NCM 111) cathodes as a model system, we first identify residual lithium components and demonstrate that an alkaline KOH solution facilitates their reintegration into the bulk structure. This treatment not only restores lithium stoichiometry and crystallinity in degraded cathodes but also simultaneously enables the removal of impurities such as conductive carbon and binder, outperforming other solution compositions for hydrothermal relithiation. Mechanistic studies further validate that Li2CO3, LiF, and LiPF6 each contribute distinct dissolution pathways that drive relithiation within the layered oxide structure. Further structural and electrochemical characterizations confirm the restoration of other cathode materials by using a similar process, including LiCoO2 (LCO), LiNi0.6Co0.2Mn0.2O2 (NCM622), and LiNi0.87Co0.05Mn0.08Al0.03O2 (NCMA). Removing external lithium salts during hydrothermal relithiation results in an estimated ∼20% reduction in direct recycling costs according to EverBatt analysis, underscoring the sustainability and economic promise of this approach.
- 25 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (9) , 13750-13764
Maximizing Lithium Recovery in Direct Recycling: Relithiation of Layered Oxide Cathodes Using Residual Lithium
Self-saturating direct recycling techniques, such as hydrothermal relithiation, offer promising pathways for scalable lithium-ion battery recycling due to their lower resource demands and reduced environmental impact compared with conventional recycling methods. However, they often require excess lithium salt additives to drive relithiation. In this study, we present a hydrothermal relithiation strategy driven by residual lithium compounds retained in the cathode black mass after cell disassembly, eliminating the need for external lithium salts during the hydrothermal step. Using spent LiNi0.33Co0.33Mn0.33O2 (NCM 111) cathodes as a model system, we first identify residual lithium components and demonstrate that an alkaline KOH solution facilitates their reintegration into the bulk structure. This treatment not only restores lithium stoichiometry and crystallinity in degraded cathodes but also simultaneously enables the removal of impurities such as conductive carbon and binder, outperforming other solution compositions for hydrothermal relithiation. Mechanistic studies further validate that Li2CO3, LiF, and LiPF6 each contribute distinct dissolution pathways that drive relithiation within the layered oxide structure. Further structural and electrochemical characterizations confirm the restoration of other cathode materials by using a similar process, including LiCoO2 (LCO), LiNi0.6Co0.2Mn0.2O2 (NCM622), and LiNi0.87Co0.05Mn0.08Al0.03O2 (NCMA). Removing external lithium salts during hydrothermal relithiation results in an estimated ∼20% reduction in direct recycling costs according to EverBatt analysis, underscoring the sustainability and economic promise of this approach.
- 19 November 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (47) , 40473-40483
In Situ Surface Reconstruction via Lithium Residue Regulation for Direct Recycling of Ni-Rich Cathodes
Surface stability is crucial for the long cycling performance of Ni-rich cathodes, as it dictates and governs side reactions, preserves crystal integrity, and mitigates capacity degradation during cycling. For spent Ni-rich cathodes targeted for one-step direct recycling, constructing a robust and stable surface is particularly challenging because prior cycling induces severe structural and morphological degradation. Here, we introduce an in situ surface reconstruction strategy that converts surface lithium residues into a protective layer via a direct liquid-phase coating with ammonium dihydrogen phosphate (ADP). During the process, residual lithium remaining after the hydrothermal relithiation is removed, while a conformal lithium phosphate (Li3PO4, LPO) layer is formed to act as both a chemical barrier and a structural stabilizer. This dual function enhances cycling stability and rate capability in regenerated cathodes, and the approach is applicable to various Ni-rich compositions including spent LiNi0.6Co0.2Mn0.2O2 (NCM622) and scrap LiNi0.866Mn0.066Co0.05Al0.018O2 (NCMA). Its scalability and compositional versatility make it a promising route for sustainable regeneration of high-performance cathode materials.
- 19 November 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (47) , 40473-40483
In Situ Surface Reconstruction via Lithium Residue Regulation for Direct Recycling of Ni-Rich Cathodes
Surface stability is crucial for the long cycling performance of Ni-rich cathodes, as it dictates and governs side reactions, preserves crystal integrity, and mitigates capacity degradation during cycling. For spent Ni-rich cathodes targeted for one-step direct recycling, constructing a robust and stable surface is particularly challenging because prior cycling induces severe structural and morphological degradation. Here, we introduce an in situ surface reconstruction strategy that converts surface lithium residues into a protective layer via a direct liquid-phase coating with ammonium dihydrogen phosphate (ADP). During the process, residual lithium remaining after the hydrothermal relithiation is removed, while a conformal lithium phosphate (Li3PO4, LPO) layer is formed to act as both a chemical barrier and a structural stabilizer. This dual function enhances cycling stability and rate capability in regenerated cathodes, and the approach is applicable to various Ni-rich compositions including spent LiNi0.6Co0.2Mn0.2O2 (NCM622) and scrap LiNi0.866Mn0.066Co0.05Al0.018O2 (NCMA). Its scalability and compositional versatility make it a promising route for sustainable regeneration of high-performance cathode materials.
- 17 December 2024
- Published by Wiley in Angewandte Chemie
- Vol. 137 (8)
Coulombic Condensation of Liquefied Gas Electrolytes for Li Metal Batteries at Ambient Pressure
The concept of employing highly concentrated electrolytes has been widely incorporated into electrolyte design, due to their enhanced Li‐metal passivation and oxidative stability compared to their diluted counterparts. However, issues such as high viscosity and sub‐optimal wettability, compromise their suitability for commercialization. In this study, we present a highly concentrated dimethyl ether‐based electrolyte that appears as a liquid phase at ambient conditions via Li+ ‐ solvents ion‐dipole interactions (Coulombic condensation). Unlike conventional high salt concentration ether‐based electrolytes, it demonstrates enhanced transport properties and fluidity. The anion‐rich solvation structure also contributes to the formation of a LiF‐rich salt‐derived solid electrolyte interphase, facilitating stable Li metal cycling for over 1000 cycles at 0.5 mA cm−2, 1 mAh cm−2 condition. When combined with a sulfurized polyacrylonitrile (SPAN) electrode, the electrolyte effectively reduces the polysulfide shuttling effect and ensures stable performance across a range of charging currents, up to 6 mA cm−2. This research underscores a promising strategy for developing an anion‐rich, high concentration ether electrolyte with decreased viscosity, which supports a Li metal anode with exceptional temperature durability and rapid charging capabilities.
- 17 December 2024
- Published by Wiley in Angewandte Chemie
- Vol. 137 (8)
Coulombic Condensation of Liquefied Gas Electrolytes for Li Metal Batteries at Ambient Pressure
The concept of employing highly concentrated electrolytes has been widely incorporated into electrolyte design, due to their enhanced Li‐metal passivation and oxidative stability compared to their diluted counterparts. However, issues such as high viscosity and sub‐optimal wettability, compromise their suitability for commercialization. In this study, we present a highly concentrated dimethyl ether‐based electrolyte that appears as a liquid phase at ambient conditions via Li+ ‐ solvents ion‐dipole interactions (Coulombic condensation). Unlike conventional high salt concentration ether‐based electrolytes, it demonstrates enhanced transport properties and fluidity. The anion‐rich solvation structure also contributes to the formation of a LiF‐rich salt‐derived solid electrolyte interphase, facilitating stable Li metal cycling for over 1000 cycles at 0.5 mA cm−2, 1 mAh cm−2 condition. When combined with a sulfurized polyacrylonitrile (SPAN) electrode, the electrolyte effectively reduces the polysulfide shuttling effect and ensures stable performance across a range of charging currents, up to 6 mA cm−2. This research underscores a promising strategy for developing an anion‐rich, high concentration ether electrolyte with decreased viscosity, which supports a Li metal anode with exceptional temperature durability and rapid charging capabilities.
- 17 December 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (8) , e202420411
Coulombic Condensation of Liquefied Gas Electrolytes for Li Metal Batteries at Ambient Pressure
The concept of employing highly concentrated electrolytes has been widely incorporated into electrolyte design, due to their enhanced Li‐metal passivation and oxidative stability compared to their diluted counterparts. However, issues such as high viscosity and sub‐optimal wettability, compromise their suitability for commercialization. In this study, we present a highly concentrated dimethyl ether‐based electrolyte that appears as a liquid phase at ambient conditions via Li+ ‐ solvents ion‐dipole interactions (Coulombic condensation). Unlike conventional high salt concentration ether‐based electrolytes, it demonstrates enhanced transport properties and fluidity. The anion‐rich solvation structure also contributes to the formation of a LiF‐rich salt‐derived solid electrolyte interphase, facilitating stable Li metal cycling for over 1000 cycles at 0.5 mA cm−2, 1 mAh cm−2 condition. When combined with a sulfurized polyacrylonitrile (SPAN) electrode, the electrolyte effectively reduces the polysulfide shuttling effect and ensures stable performance across a range of charging currents, up to 6 mA cm−2. This research underscores a promising strategy for developing an anion‐rich, high concentration ether electrolyte with decreased viscosity, which supports a Li metal anode with exceptional temperature durability and rapid charging capabilities.
- 17 December 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (8) , e202420411
Coulombic Condensation of Liquefied Gas Electrolytes for Li Metal Batteries at Ambient Pressure
The concept of employing highly concentrated electrolytes has been widely incorporated into electrolyte design, due to their enhanced Li‐metal passivation and oxidative stability compared to their diluted counterparts. However, issues such as high viscosity and sub‐optimal wettability, compromise their suitability for commercialization. In this study, we present a highly concentrated dimethyl ether‐based electrolyte that appears as a liquid phase at ambient conditions via Li+ ‐ solvents ion‐dipole interactions (Coulombic condensation). Unlike conventional high salt concentration ether‐based electrolytes, it demonstrates enhanced transport properties and fluidity. The anion‐rich solvation structure also contributes to the formation of a LiF‐rich salt‐derived solid electrolyte interphase, facilitating stable Li metal cycling for over 1000 cycles at 0.5 mA cm−2, 1 mAh cm−2 condition. When combined with a sulfurized polyacrylonitrile (SPAN) electrode, the electrolyte effectively reduces the polysulfide shuttling effect and ensures stable performance across a range of charging currents, up to 6 mA cm−2. This research underscores a promising strategy for developing an anion‐rich, high concentration ether electrolyte with decreased viscosity, which supports a Li metal anode with exceptional temperature durability and rapid charging capabilities.
- 21 October 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (44) , 30737-30748
Understanding and Controlling Structural Defects and Disordering in LiNi0.5Mn1.5O4 Cathodes for Direct Recycling
Despite significant progress in recycling spent lithium-ion batteries (LIBs), nondestructive, direct recycling methods still face untenable discrepancies in multiple cathode chemistries, which primarily originate from a variety of structure stabilities during the recycling process. Through systematic investigation of the microstructure evolution during the relithiation treatment, we observed the inevitably induced defects and Li/Mn disordering in the LiNi0.5Mn1.5O4 cathode, contributing to the sluggish Li+ transport and irreversible capacity loss. Employing a defect engineering approach to achieve twin boundaries and preferred grain orientation, we show the regenerated cathodes demonstrate a substantial enhancement of Li+ diffusion and cycling stability, retaining 97.4% capacity after 100 cycles and 87.96% after 200 cycles at C/3. This work not only elaborates on a systematic investigation of defect inducement and structural restoration mechanism but also provides an effective approach to directly recycle high-voltage spinel-type cathodes, contributing to the sustainability of next-generation LIBs.
- 21 October 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (44) , 30737-30748
Understanding and Controlling Structural Defects and Disordering in LiNi0.5Mn1.5O4 Cathodes for Direct Recycling
Despite significant progress in recycling spent lithium-ion batteries (LIBs), nondestructive, direct recycling methods still face untenable discrepancies in multiple cathode chemistries, which primarily originate from a variety of structure stabilities during the recycling process. Through systematic investigation of the microstructure evolution during the relithiation treatment, we observed the inevitably induced defects and Li/Mn disordering in the LiNi0.5Mn1.5O4 cathode, contributing to the sluggish Li+ transport and irreversible capacity loss. Employing a defect engineering approach to achieve twin boundaries and preferred grain orientation, we show the regenerated cathodes demonstrate a substantial enhancement of Li+ diffusion and cycling stability, retaining 97.4% capacity after 100 cycles and 87.96% after 200 cycles at C/3. This work not only elaborates on a systematic investigation of defect inducement and structural restoration mechanism but also provides an effective approach to directly recycle high-voltage spinel-type cathodes, contributing to the sustainability of next-generation LIBs.
- 23 April 2015
- Published by Wiley in ChemInform
- Vol. 46 (19)
ChemInform Abstract: An Unprecedented Tandem Annulation of ω-Azido-1-alkynes with Diaryliodonium Salts: A Facile Synthesis of Polycyclic Quinolines.
The copper‐catalyzed annulation of azidoalkynes with diaryliodonium triflates, serving as C‐2 building blocks, proceeds smoothly and under mild conditions.
- 23 April 2015
- Published by Wiley in ChemInform
- Vol. 46 (19)
ChemInform Abstract: An Unprecedented Tandem Annulation of ω-Azido-1-alkynes with Diaryliodonium Salts: A Facile Synthesis of Polycyclic Quinolines.
The copper‐catalyzed annulation of azidoalkynes with diaryliodonium triflates, serving as C‐2 building blocks, proceeds smoothly and under mild conditions.