Li-Lin Tan
Li-Lin Tan has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Chengzhi Ma
Hainan Provincial Key Laboratory of Fine Chemicals, College of Chemical Engineering and Technology, Hainan University, Haikou 570228, China
1 shared publication - Jiawei Cai
Hainan Provincial Key Laboratory of Fine Chemicals, College of Chemical Engineering and Technology, Hainan University, Haikou 570228, China
1 shared publication - Juan Gao
Shantou Engineering Technology Research Center for Green and Precise Manufacturing of High-Value Chemicals, Chemistry and Chemical Engineering Guangdong Laboratory, Shantou 515031, China
1 shared publication - Jun-Min Liu
The Key Laboratory of Low‐Carbon Chemistry & Energy Conservation of Guangdong Province School of Materials Science and Engineering Sun Yat‐sen University Guangzhou China
1 shared publication - Lingyu Tai
International Joint Research Center for the Control and Prevention of Environmental Pollution on Tropical Islands of Hainan Province, Key Laboratory of Agro-Forestry Environmental Processes and Ecological Regulation of Hainan Province, School of Environmental Science and Engineering, Hainan University, Haikou 570228, China
1 shared publication - Pinghuai Liu
School of Chemistry and Chemical Engineering, Hainan University, Haikou 570228, China
1 shared publication
Latest Publications
- Open Access
- 19 March 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (6) , 372
Photocatalytic Phenylmethylamine Coupling Reaction of Organic–Inorganic Composites Based on Benzothiophene Polymers and TiO2
Benzothiophene polymers, as a class of novel organic semiconductor materials, exhibit significant potential in the field of photocatalysis due to their broad light-responsive range and tunable energy level structures. In this study, a benzothiophene-based polymer organic semiconductor (denoted as P42) was integrated with titanium dioxide (TiO2) via a simple sol–gel method, yielding an organic–inorganic hybrid material. This composite facilitates the modulation of energy level potentials and promotes the effective separation of photogenerated charges, thereby demonstrating remarkable synergistic catalytic performance in the photocatalytic oxidative coupling of benzylamines. By optimizing the ratio of organic to inorganic components and various photocatalytic reaction conditions, the hybrid material 1.7%P42-TiO2, containing 1.7 wt% of the dithiophene polymer without any metal cocatalysts, exhibited outstanding performance under an air atmosphere and visible light irradiation after 12 h. It achieved a yield of over 88.7% and a selectivity exceeding 89.8% in the synthesis of N-benzoylaniline, significantly surpassing the performance of pure TiO2 (52.9% yield, 54.9% selectivity) and P42 (54.4% yield, 54.9% selectivity). Structural and photophysical characterizations, including UV–Vis DRS, XRD, SEM, TEM, and EPR, reveal that the enhanced photocatalytic activity originates from broad visible-light absorption, improved charge separation, and well-matched energy levels. Mechanistic investigations suggest a synergistic pathway involving photoinduced hole oxidation and radical-mediated coupling. This work provides valuable insights and a reference for the solar-driven photocatalytic synthesis of nitrogen-containing platform molecules under mild conditions.
- 19 March 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (6) , 372
Open AccessPhotocatalytic Phenylmethylamine Coupling Reaction of Organic–Inorganic Composites Based on Benzothiophene Polymers and TiO2
Benzothiophene polymers, as a class of novel organic semiconductor materials, exhibit significant potential in the field of photocatalysis due to their broad light-responsive range and tunable energy level structures. In this study, a benzothiophene-based polymer organic semiconductor (denoted as P42) was integrated with titanium dioxide (TiO2) via a simple sol–gel method, yielding an organic–inorganic hybrid material. This composite facilitates the modulation of energy level potentials and promotes the effective separation of photogenerated charges, thereby demonstrating remarkable synergistic catalytic performance in the photocatalytic oxidative coupling of benzylamines. By optimizing the ratio of organic to inorganic components and various photocatalytic reaction conditions, the hybrid material 1.7%P42-TiO2, containing 1.7 wt% of the dithiophene polymer without any metal cocatalysts, exhibited outstanding performance under an air atmosphere and visible light irradiation after 12 h. It achieved a yield of over 88.7% and a selectivity exceeding 89.8% in the synthesis of N-benzoylaniline, significantly surpassing the performance of pure TiO2 (52.9% yield, 54.9% selectivity) and P42 (54.4% yield, 54.9% selectivity). Structural and photophysical characterizations, including UV–Vis DRS, XRD, SEM, TEM, and EPR, reveal that the enhanced photocatalytic activity originates from broad visible-light absorption, improved charge separation, and well-matched energy levels. Mechanistic investigations suggest a synergistic pathway involving photoinduced hole oxidation and radical-mediated coupling. This work provides valuable insights and a reference for the solar-driven photocatalytic synthesis of nitrogen-containing platform molecules under mild conditions.
Synergistic Integration of Metal‐Organic Ring and Cyano‐COF in Z‐Scheme for Stable H 2 Production With Single‐Atom Pd Sites
The development of robust and efficient photosystems is crucial for solar‐driven H 2 production. Herein, a supramolecular photosystem is constructed by immobilizing a photosensitive metal‐organic ring (MAC‐KB1) onto a cyano‐functionalized covalent organic framework (BT‐CN‐COF). The formed heterointerface facilitates supramolecular interactions and enables the formation of a direct Z‐scheme charge transfer pathway. The optimal composite achieves an excellent H 2 evolution rate of 32.13 mmol g −1 h −1 and shows no significant activity decay after 130 h of reaction, representing one of the most stable COF‐based photocatalysts. Mechanism studies reveal that the cyano groups in the COF optimize electron distribution, while the single‐atom Pd sites in the metal‐organic ring act as highly active catalytic centers. The synergistic effect of enhanced light absorption, efficient Z‐scheme charge separation, and atomic‐level utilization of Pd contributes to the superior and stable photocatalytic performance. This work provides a novel design strategy for constructing highly efficient and stable supramolecular photosystems for solar‐to‐fuel conversion.
Synergistic Integration of Metal‐Organic Ring and Cyano‐COF in Z‐Scheme for Stable H 2 Production With Single‐Atom Pd Sites
The development of robust and efficient photosystems is crucial for solar‐driven H 2 production. Herein, a supramolecular photosystem is constructed by immobilizing a photosensitive metal‐organic ring (MAC‐KB1) onto a cyano‐functionalized covalent organic framework (BT‐CN‐COF). The formed heterointerface facilitates supramolecular interactions and enables the formation of a direct Z‐scheme charge transfer pathway. The optimal composite achieves an excellent H 2 evolution rate of 32.13 mmol g −1 h −1 and shows no significant activity decay after 130 h of reaction, representing one of the most stable COF‐based photocatalysts. Mechanism studies reveal that the cyano groups in the COF optimize electron distribution, while the single‐atom Pd sites in the metal‐organic ring act as highly active catalytic centers. The synergistic effect of enhanced light absorption, efficient Z‐scheme charge separation, and atomic‐level utilization of Pd contributes to the superior and stable photocatalytic performance. This work provides a novel design strategy for constructing highly efficient and stable supramolecular photosystems for solar‐to‐fuel conversion.
- Open Access
Hydrophobically Modified Polyacrylamide Incorporating Both Hydrophilic and Hydrophobic Units: Enhanced Printability and Stability in Aqueous Ink
For this research, three hydrophobically modified polyacrylamides, HPAAB, HPAAF, and HPAAS, with multiple hydrophobic monomers were designed, synthesized, and used as thickeners in aqueous ink for digital ink-jet printing. The structures were characterized by Fourier transform infrared (FTIR) analysis and nuclear magnetic resonance (NMR) spectroscopy. The viscosity–average molecular weight was determined by intrinsic viscosity determination and was adjusted according to hydrophobic content. The critical association concentration (CAC) of polymers was measured simultaneously using the apparent viscosity method and the fluorescence spectrum. The formation of a network structure and the mechanism of hydrophobic association are visualized dynamically with a scanning electron microscope (SEM) at different concentrations. Under the same conditions, HPAAB exhibited excellent thickening ability across different pH levels, temperatures, and shear rates, which is caused by the longer hydrophobic side chain and the stronger hydrophobic effect of the behenyl polyoxyethylene ether methacrylate (BEM) group. Furthermore, an aqueous ink using HPAAB as a thickener displays significant printability and stability, functioning much better than a corresponding aqueous ink that uses a commercial thickener. This is the first example of a hydrophobic associating polyacrylamide, incorporating both hydrophilic and hydrophobic units within a single hydrophobic chain, thereby serving as an efficient thickener for aqueous ink.
Open AccessHydrophobically Modified Polyacrylamide Incorporating Both Hydrophilic and Hydrophobic Units: Enhanced Printability and Stability in Aqueous Ink
For this research, three hydrophobically modified polyacrylamides, HPAAB, HPAAF, and HPAAS, with multiple hydrophobic monomers were designed, synthesized, and used as thickeners in aqueous ink for digital ink-jet printing. The structures were characterized by Fourier transform infrared (FTIR) analysis and nuclear magnetic resonance (NMR) spectroscopy. The viscosity–average molecular weight was determined by intrinsic viscosity determination and was adjusted according to hydrophobic content. The critical association concentration (CAC) of polymers was measured simultaneously using the apparent viscosity method and the fluorescence spectrum. The formation of a network structure and the mechanism of hydrophobic association are visualized dynamically with a scanning electron microscope (SEM) at different concentrations. Under the same conditions, HPAAB exhibited excellent thickening ability across different pH levels, temperatures, and shear rates, which is caused by the longer hydrophobic side chain and the stronger hydrophobic effect of the behenyl polyoxyethylene ether methacrylate (BEM) group. Furthermore, an aqueous ink using HPAAB as a thickener displays significant printability and stability, functioning much better than a corresponding aqueous ink that uses a commercial thickener. This is the first example of a hydrophobic associating polyacrylamide, incorporating both hydrophilic and hydrophobic units within a single hydrophobic chain, thereby serving as an efficient thickener for aqueous ink.