Soham Dey
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Soham Dey has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Devojyoti Kansabanik
Cooperative Programs for the Advancement of Earth System Science University Corporation for Atmospheric Research 3090 Center Green Dr 80301 Boulder CO USA
5 shared publications - Divya Oberoi
National Centre for Radio Astrophysics, Tata Institute of Fundamental Research, Pune, India
5 shared publications - Mattia Mancini
SKA Observatory (SKAO), Jodrell Bank Centre for Astrophysics, Macclesfield, UK
3 shared publications - Pietro Zucca
ASTRON, the Netherlands Institute for Radio Astronomy, Dwingeloo, The Netherlands
3 shared publications - Surajit Mondal
New Jersey Institute of Technology
3 shared publications - Deepan Patra
National Centre for Radio Astrophysics, Tata Institute of Fundamental Research
2 shared publications
Latest Publications
- Open Access
- 28 November 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 704, A75
An automated, self-calibration-based pipeline for high-fidelity solar imaging with LOFAR: SIMPL
Context. The LOw Frequency ARray (LOFAR) is capable of imaging spectroscopy of the Sun in the 10–240 MHz frequency range, with high spectral, temporal, and spatial resolution. However, the complex and rapidly varying nature of solar radio emission – spanning several orders of magnitude in brightness and further exacerbated by the strong ionospheric phase distortions during daytime observations, poses major challenges for calibration, imaging, and automation. Aims. We aim to develop a fully automated, high-fidelity imaging pipeline optimised for LOFAR solar observations, capable of handling the intrinsic variability of solar emission and producing science-ready images with minimal human intervention. Methods. We have built the Solar Imaging Pipeline for LOFAR (SIMPL), which integrates excision of radio-frequency interference (RFI) for the solar-specific scenarios, calibration strategies, and self-calibration. At present, SIMPL processes data from the LOFAR core stations and produces total-intensity solar images, with ongoing developments aimed at enabling full polarimetric imaging and incorporating increasingly distant antennas. The pipeline is designed to enable scalable and uniform processing of large archival datasets. Results. In terms of performance, SIMPL achieves more than an order of magnitude improvement in imaging dynamic range compared with previous efforts and reliably produces high-quality spectroscopic snapshot images. It has been tested across a wide range of solar conditions. It is currently being employed to process a decade of LOFAR solar observations, providing science-ready Flexible Image Transport System (FITS) images for the community and enabling both comprehensive and novel studies of solar radio phenomena, ranging from quiet Sun emission and faint non-thermal features to active regions and their associated dynamic events, such as transient bursts.
- 28 November 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 704, A75
Open AccessAn automated, self-calibration-based pipeline for high-fidelity solar imaging with LOFAR: SIMPL
Context. The LOw Frequency ARray (LOFAR) is capable of imaging spectroscopy of the Sun in the 10–240 MHz frequency range, with high spectral, temporal, and spatial resolution. However, the complex and rapidly varying nature of solar radio emission – spanning several orders of magnitude in brightness and further exacerbated by the strong ionospheric phase distortions during daytime observations, poses major challenges for calibration, imaging, and automation. Aims. We aim to develop a fully automated, high-fidelity imaging pipeline optimised for LOFAR solar observations, capable of handling the intrinsic variability of solar emission and producing science-ready images with minimal human intervention. Methods. We have built the Solar Imaging Pipeline for LOFAR (SIMPL), which integrates excision of radio-frequency interference (RFI) for the solar-specific scenarios, calibration strategies, and self-calibration. At present, SIMPL processes data from the LOFAR core stations and produces total-intensity solar images, with ongoing developments aimed at enabling full polarimetric imaging and incorporating increasingly distant antennas. The pipeline is designed to enable scalable and uniform processing of large archival datasets. Results. In terms of performance, SIMPL achieves more than an order of magnitude improvement in imaging dynamic range compared with previous efforts and reliably produces high-quality spectroscopic snapshot images. It has been tested across a wide range of solar conditions. It is currently being employed to process a decade of LOFAR solar observations, providing science-ready Flexible Image Transport System (FITS) images for the community and enabling both comprehensive and novel studies of solar radio phenomena, ranging from quiet Sun emission and faint non-thermal features to active regions and their associated dynamic events, such as transient bursts.
- Open Access
- 19 November 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 703, A271
Source location and evolution of a multilane type II radio burst
Context. Shocks in the solar corona are capable of accelerating electrons that in turn generate radio emission known as type II radio bursts. The characteristics and morphology of these radio bursts in the dynamic spectrum reflect the evolution of the shock itself, together with the properties of the local corona where the shock propagates. Aims. In this work we study the evolution of a complex type II radio burst with a multilane structure to find the locations where the radio emission is produced and relate them to the properties of the local environment where the shock propagates. Methods. Using radio imaging, we were able to separately track each lane composing the type II burst and relate the position of the emission to the properties of the ambient medium, such as density, Alfvén speed, and magnetic field. Results. We show that the radio burst morphology in the dynamic spectrum changes with time and is related to the complexity of the local environment. The initial stage of the radio emission is characterized by a single broad lane in the spectrum, while the later stages of the radio signature evolve in a multilane scenario. The radio imaging reveals how the initial stage of the radio emission separates with time into different locations along the shock front as the density and orientation of the magnetic field change along the shock propagation. At the time when the spectrum shows a multilane shape, we find a clear separation of the imaged radio sources propagating in regions with different densities. Conclusions. By combining radio imaging with the properties of the local corona, we describe the evolution of a type II radio burst and, for the first time, identify three distinct radio emission regions above the coronal mass ejection front. Two regions were located at the flanks, producing earlier radio emission than the central position, in accordance with the complexity of density and Alfvén speed values in the regions where radio emission is generated. This unprecedented observation of a triple-source structure provides new insights into the nature of multilane type II bursts.
- 19 November 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 703, A271
Open AccessSource location and evolution of a multilane type II radio burst
Context. Shocks in the solar corona are capable of accelerating electrons that in turn generate radio emission known as type II radio bursts. The characteristics and morphology of these radio bursts in the dynamic spectrum reflect the evolution of the shock itself, together with the properties of the local corona where the shock propagates. Aims. In this work we study the evolution of a complex type II radio burst with a multilane structure to find the locations where the radio emission is produced and relate them to the properties of the local environment where the shock propagates. Methods. Using radio imaging, we were able to separately track each lane composing the type II burst and relate the position of the emission to the properties of the ambient medium, such as density, Alfvén speed, and magnetic field. Results. We show that the radio burst morphology in the dynamic spectrum changes with time and is related to the complexity of the local environment. The initial stage of the radio emission is characterized by a single broad lane in the spectrum, while the later stages of the radio signature evolve in a multilane scenario. The radio imaging reveals how the initial stage of the radio emission separates with time into different locations along the shock front as the density and orientation of the magnetic field change along the shock propagation. At the time when the spectrum shows a multilane shape, we find a clear separation of the imaged radio sources propagating in regions with different densities. Conclusions. By combining radio imaging with the properties of the local corona, we describe the evolution of a type II radio burst and, for the first time, identify three distinct radio emission regions above the coronal mass ejection front. Two regions were located at the flanks, producing earlier radio emission than the central position, in accordance with the complexity of density and Alfvén speed values in the regions where radio emission is generated. This unprecedented observation of a triple-source structure provides new insights into the nature of multilane type II bursts.
- Open Access
An automated, self-calibration based pipeline for high-fidelity solar imaging with LOFAR: SIMPL
The LOw Frequency ARray (LOFAR) is capable of imaging spectroscopy of the Sun in the 10-240 MHz frequency range, with high spectral, temporal, and spatial resolution. However, the complex and rapidly varying nature of solar radio emission - spanning several orders of magnitude in brightness further exacerbated by the strong ionospheric phase distortions during daytime observations, poses major challenges for calibration, imaging, and automation. We aim to develop a fully automated, high-fidelity imaging pipeline optimized for LOFAR solar observations, capable of handling the intrinsic variability of solar emission and producing science-ready images with minimal human intervention. We have built the Solar Imaging Pipeline for LOFAR (SIMPL), which integrates excision of radio-frequency interference (RFI) for the solar-specific scenarios, calibration strategies, and self-calibration. The pipeline is designed to enable scalable and uniform processing of large archival datasets. SIMPL achieves more than an order-of-magnitude improvement in imaging dynamic range compared to previous efforts and reliably produces high-quality spectroscopic snapshot images. It has been tested across a wide range of solar conditions. It is currently being employed to process a decade of LOFAR solar observations, providing science-ready FITS images for the community and enabling both comprehensive and novel studies of solar radio phenomena -- ranging from quiet Sun emission and faint non-thermal features to active regions and their associated dynamic events, such as transient bursts.
Open AccessAn automated, self-calibration based pipeline for high-fidelity solar imaging with LOFAR: SIMPL
The LOw Frequency ARray (LOFAR) is capable of imaging spectroscopy of the Sun in the 10-240 MHz frequency range, with high spectral, temporal, and spatial resolution. However, the complex and rapidly varying nature of solar radio emission - spanning several orders of magnitude in brightness further exacerbated by the strong ionospheric phase distortions during daytime observations, poses major challenges for calibration, imaging, and automation. We aim to develop a fully automated, high-fidelity imaging pipeline optimized for LOFAR solar observations, capable of handling the intrinsic variability of solar emission and producing science-ready images with minimal human intervention. We have built the Solar Imaging Pipeline for LOFAR (SIMPL), which integrates excision of radio-frequency interference (RFI) for the solar-specific scenarios, calibration strategies, and self-calibration. The pipeline is designed to enable scalable and uniform processing of large archival datasets. SIMPL achieves more than an order-of-magnitude improvement in imaging dynamic range compared to previous efforts and reliably produces high-quality spectroscopic snapshot images. It has been tested across a wide range of solar conditions. It is currently being employed to process a decade of LOFAR solar observations, providing science-ready FITS images for the community and enabling both comprehensive and novel studies of solar radio phenomena -- ranging from quiet Sun emission and faint non-thermal features to active regions and their associated dynamic events, such as transient bursts.
- Open Access
- 31 July 2025
- Published by American Astronomical Society in The Astrophysical Journal Letters
- Vol. 988 (2) , L73
First Robust Detection of Linear Polarization from Metric Solar Emissions: Challenging Established Paradigms
Polarimetric radio observations of the Sun can provide rich information about emission mechanisms and the propagation medium. For the past five decades, solar polarimetric studies at low radio frequencies have almost always assumed the absence of linear polarization. This has been based on the expectations from coronal propagation effects. Here we present the first robust evidence of linear polarization from solar emissions at meter wavelengths using simultaneous measurements with two telescopes of very different designs separated by thousands of kilometers—the Murchison Widefield Array and the upgraded Giant Metrewave Radio Telescope. Both data sets show consistent linear polarization fractions, confirming this detection. Rapid changes in morphology, as well as the fractional linear polarization at small time and frequency spans, further rule out any possibilities of an instrumental origin. Assuming the absence of linear polarization in solar radio emissions can result in incorrect interpretation of solar observations as well as those of other flare stars, which are often guided by learnings from solar studies. This discovery highlights the need for relaxing this assumption and is essential for precise estimation of polarization signatures, ultimately leading to a better understanding of the plasma conditions in the Sun and other stars.
- 31 July 2025
- Published by American Astronomical Society in The Astrophysical Journal Letters
- Vol. 988 (2) , L73
Open AccessFirst Robust Detection of Linear Polarization from Metric Solar Emissions: Challenging Established Paradigms
Polarimetric radio observations of the Sun can provide rich information about emission mechanisms and the propagation medium. For the past five decades, solar polarimetric studies at low radio frequencies have almost always assumed the absence of linear polarization. This has been based on the expectations from coronal propagation effects. Here we present the first robust evidence of linear polarization from solar emissions at meter wavelengths using simultaneous measurements with two telescopes of very different designs separated by thousands of kilometers—the Murchison Widefield Array and the upgraded Giant Metrewave Radio Telescope. Both data sets show consistent linear polarization fractions, confirming this detection. Rapid changes in morphology, as well as the fractional linear polarization at small time and frequency spans, further rule out any possibilities of an instrumental origin. Assuming the absence of linear polarization in solar radio emissions can result in incorrect interpretation of solar observations as well as those of other flare stars, which are often guided by learnings from solar studies. This discovery highlights the need for relaxing this assumption and is essential for precise estimation of polarization signatures, ultimately leading to a better understanding of the plasma conditions in the Sun and other stars.
- Open Access
- 1 May 2025
- Published by American Astronomical Society in The Astrophysical Journal Supplement Series
- Vol. 278 (1) , 26
A Formalism for Calibrating the Instrumental Polarization of Radio Interferometric Arrays at Meter Wavelengths Using Unpolarized Sky: A Demonstration Using MWA Observations
Calibration of instrumental polarization is critical for measuring polarized radio emissions from astrophysical sources to extract the magnetic field information in astrophysical, heliospheric, and terrestrial plasmas. At meter wavelengths, calibration of radio polarimetric observations is particularly challenging because of the scarcity of bright polarized sources due to significant Faraday depolarization. Here, we present a novel formalism for polarization calibration using an unpolarized sky model. The formalism is specifically designed for wide-field, low-frequency instruments like the Murchison Widefield Array (MWA), the LOw Frequency ARray (LOFAR), New Extension in Nançay Upgrading LOFAR, Owens Valley Radio Observatory Long Wavelength Array, low-frequency telescope of the Square Kilometre Array Observatory, etc. By leveraging the apparent polarization of the unpolarized sky induced by the polarized primary beam of the radio telescope, this method avoids dependence on bright polarized calibrators. It is also immune to ionospheric Faraday rotation. The validation of the approach via MWA observations confirms the accuracy of the method. This formalism provides a robust framework for low-frequency polarization calibration. It addresses the longstanding calibration challenges and advances the field of low-frequency polarimetry by enabling polarization studies of astrophysical radio sources.
- 1 May 2025
- Published by American Astronomical Society in The Astrophysical Journal Supplement Series
- Vol. 278 (1) , 26
Open AccessA Formalism for Calibrating the Instrumental Polarization of Radio Interferometric Arrays at Meter Wavelengths Using Unpolarized Sky: A Demonstration Using MWA Observations
Calibration of instrumental polarization is critical for measuring polarized radio emissions from astrophysical sources to extract the magnetic field information in astrophysical, heliospheric, and terrestrial plasmas. At meter wavelengths, calibration of radio polarimetric observations is particularly challenging because of the scarcity of bright polarized sources due to significant Faraday depolarization. Here, we present a novel formalism for polarization calibration using an unpolarized sky model. The formalism is specifically designed for wide-field, low-frequency instruments like the Murchison Widefield Array (MWA), the LOw Frequency ARray (LOFAR), New Extension in Nançay Upgrading LOFAR, Owens Valley Radio Observatory Long Wavelength Array, low-frequency telescope of the Square Kilometre Array Observatory, etc. By leveraging the apparent polarization of the unpolarized sky induced by the polarized primary beam of the radio telescope, this method avoids dependence on bright polarized calibrators. It is also immune to ionospheric Faraday rotation. The validation of the approach via MWA observations confirms the accuracy of the method. This formalism provides a robust framework for low-frequency polarization calibration. It addresses the longstanding calibration challenges and advances the field of low-frequency polarimetry by enabling polarization studies of astrophysical radio sources.
- Open Access
- 29 October 2024
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 975 (1) , 122
New Insights into Type-I Solar Noise Storms from High Angular Resolution Spectroscopic Imaging with the Upgraded Giant Metrewave Radio Telescope
Type-I solar noise storms are perhaps the most commonly observed active radio emissions from the Sun at meter-wavelengths. Noise storms have a long-lived and wideband continuum background with superposed islands of much brighter narrowband and short-lived emissions, known as type-I bursts. There is a serious paucity of studies focusing on the morphology of these two types of emissions, primarily because of the belief that coronal scattering will always wash out any features at small angular scales. However, it is important to investigate their spatial structures in detail to make a spatio-temporal connection with observations at extreme-ultraviolet/X-ray bands to understand the detailed nature of these emissions. In this work, we use high angular resolution observations from the upgraded Giant Metrewave Radio Telescope to demonstrate that it is possible to detect structures with angular scales as small as ∼9″, about three times smaller than the smallest structure reported to date from noise storms. Our observations also suggest that while the individual type-I bursts are narrowband in nature, the bursts are probably caused by traveling disturbance(s) inducing magnetic reconnections at different coronal heights, and thus leading to correlated change in the morphology of the type-I bursts observed at a wide range of frequencies.
- 29 October 2024
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 975 (1) , 122
Open AccessNew Insights into Type-I Solar Noise Storms from High Angular Resolution Spectroscopic Imaging with the Upgraded Giant Metrewave Radio Telescope
Type-I solar noise storms are perhaps the most commonly observed active radio emissions from the Sun at meter-wavelengths. Noise storms have a long-lived and wideband continuum background with superposed islands of much brighter narrowband and short-lived emissions, known as type-I bursts. There is a serious paucity of studies focusing on the morphology of these two types of emissions, primarily because of the belief that coronal scattering will always wash out any features at small angular scales. However, it is important to investigate their spatial structures in detail to make a spatio-temporal connection with observations at extreme-ultraviolet/X-ray bands to understand the detailed nature of these emissions. In this work, we use high angular resolution observations from the upgraded Giant Metrewave Radio Telescope to demonstrate that it is possible to detect structures with angular scales as small as ∼9″, about three times smaller than the smallest structure reported to date from noise storms. Our observations also suggest that while the individual type-I bursts are narrowband in nature, the bursts are probably caused by traveling disturbance(s) inducing magnetic reconnections at different coronal heights, and thus leading to correlated change in the morphology of the type-I bursts observed at a wide range of frequencies.